journal article·2020-04Open access

Glass forming ability and soft-magnetic properties of Fe-based glassy alloys developed using high phosphorous pig Iron

Premkumar Murugaiyan, Amitava Mitra, Rajat K. Roy, Pavan Bijalwan, Monojit Dutta, Atanu Banerjee, Ashis K. Panda

Abstract

Abstract Glass forming ability (GFA) and soft-magnetic behaviour of melt-spun Fe69C5.5P11.5Mn0.4Si2.3Cr1.8Mo1B8.5 (alloy 2) and Fe68C9P12Mn1Si3Nb2B5, (alloy 3) alloys prepared using high phosphorous pig iron (h-PI, Fe80C14P2.2Mn0.4Si3.4) has been studied. The glass formation, thermo-physical and soft-magnetic properties of the alloys were analyzed for different quenching rates by varying wheel speed as 23, 26, 33, 39 and 43 m/s. The simultaneous incorporation of alloying elements (Cr, Mo, Nb) and metalloids (C, B, P, Si) transforms h-PI to complete glassy alloy, even at low quenching rates. The melt quenching rate influences the thermal parameters and Curie temperature of glassy ribbons in an opposite way. Amongst all, FeCPMnSiCrMoB glassy alloy show superior combination of higher glass transition temperature of 788 K, super cooled region of 34 K, glass Curie temperature of 552 K, coercivity less than 13 A/m and maximum saturation magnetization of 1.1 T. In addition, the annealing treatment at 758 K improves magnetic softness (1.7 A/m) of the alloy by relaxation of quenched-in stresses. The comparison of developed glassy alloy with similar Fe-glassy alloys and SENNTIX type alloys show best combination of thermo-physical and magnetic properties. The glassy alloy prepared using blast furnace high phosphorous pig iron can be used for uniformly gapped soft-magnetic cores.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties and Applications · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Performance factor comparison of nanocrystalline, amorphous and crystalline soft magnetic materials for medium frequency applications
2. FePBNbCr soft magnetic glassy alloys “SENNTIX” with low loss characteristics for commercial inductor cores10.4028/www.scientific.net/MSF.654-656.1098 ↗
3. New Fe-based soft magnetic amorphous alloys with high saturation magnetization and good corrosion resistance for dust core application10.1016/j.intermet.2016.05.011 ↗
4. Enhanced soft magnetic properties of Fe-based amorphous powder cores by longitude magnetic field annealing10.1016/j.jallcom.2017.02.202 ↗
5. Novel Fe-based nanocrystalline powder cores with high performance prepared by using industrial materials10.1016/j.intermet.2018.09.001 ↗
6. Fabrication of FeSiBPNb amorphous powder cores with high DC-bias and excellent soft magnetic properties10.1016/j.jmmm.2015.10.069 ↗
7. Microstructure and magnetic properties of soft magnetic powder cores of amorphous and nanocrystalline alloys10.1016/j.jmmm.2012.10.043 ↗
8. SENNTIX-type amorphous alloys with high Bs and improved corrosion resistance10.1016/j.jallcom.2016.10.083 ↗
9. Fe-based bulk metallic glasses: glass formation, fabrication, properties and applications10.1016/j.pmatsci.2019.01.003 ↗
10. Effects of elemental addition on the microstructure, thermal stability, and magnetic properties of the mechanically alloyed FeSiBAlNi high entropy alloys
11. Metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
12. Ternary Fe-B-C and quaternary Fe-B-C-Si amorphous alloys with glass transition and high magnetization10.1016/j.jallcom.2016.12.060 ↗
13. Iron-based bulk metallic glasses10.1179/1743280412Y.0000000007 ↗
14. Nanocrystalline Fe88-2xCoxNixZr7B4Cu1alloys: soft magnets for vehicle electrification technologies (invited)10.1063/1.4914118 ↗
15. Improved corrosion resistance of novel Fe-based amorphous alloys10.1016/j.matdes.2016.01.100 ↗
16. Fe-based bulk metallic glasses: glass formation, fabrication, properties and applications10.1016/j.pmatsci.2019.01.003 ↗
17. Fe-based bulk amorphous alloys with iron contents as high as 82 at%10.1016/j.jmmm.2015.03.070 ↗
18. Bulk amorphous FC20 (Fe-C-Si) alloys with small amounts of B and their crystallized structure and mechanical properties10.1016/S1359-6454(99)00394-8 ↗
19. Glass formation and magnetic properties of Fe-C-Si-B-P-(Cr-Al-Co) bulk metallic glasses fabricated using industrial raw materials10.1016/j.jmmm.2009.04.021 ↗
20. Effect of quenching rate on the microstructure and mechanical behavior of Ce 75 Al 21 Ga 4 glassy alloy10.1016/j.matchar.2017.09.037 ↗
21. Tunable mechanical properties of Ti-Zr-Ni-Cr-V amorphous ribbons via different melt spinning speeds during rapid solidification process10.3390/ma11060947 ↗
22. Poor glass-forming ability of Fe-based alloys: its origin in high-temperature melt dynamics10.1016/j.jnoncrysol.2017.05.026 ↗
23. Role of P on amorphization, microstructure, thermo-physical and soft magnetic properties of Fe-rich FeB(P)SiNbCu melt-spun alloys10.1016/j.jmmm.2019.165723 ↗
24. Glassy blast furnace pig iron and design of other glassy compositions using thermodynamic calculations10.1016/j.jnoncrysol.2018.01.029 ↗
25. Hidden electronic rule in the “cluster-plus-glue-Atom” model
26. Influence of the preparation cooling rate on crystallization kinetics of Fe74Mo6P13C7 amorphous alloys10.1016/j.jnoncrysol.2017.09.012 ↗
27. Effect of cooling rate on the crystallization and mechanical behaviour of Zr-Ga-Cu-Ni metallic glass composition10.1016/j.jallcom.2015.06.275 ↗
28. Vitrification and devitrification processes in metallic glasses10.1016/j.jallcom.2012.09.057 ↗
29. Investigation on the crystallization mechanism difference between FINEMET�and NANOMET�type Fe-based soft magnetic amorphous alloys10.1063/1.4964433 ↗
30. Origin of low coercivity of Fe-(Al, Ga)-(P, C, B, Si, Ge) bulk glassy alloys10.2320/matertrans.44.2020 ↗
31. Modern soft magnets: amorphous and nanocrystalline materials10.1016/j.actamat.2012.10.040 ↗
32. Quenched-in stresses in amorphous ribbons10.1016/0304-8853(94)90478-2 ↗
33. Effect of quenching rate on magnetic properties and local magnetic anisotropy in Fe78Si9B13 glass10.1016/S0304-8853(00)00187-6 ↗
34. Nanocrystalline soft magnetic materials10.1016/0304-8853(95)01126-9 ↗
35. Magnetic microstructure of nanocrystalline FeCuNbSiB soft magnets10.1016/j.jnoncrysol.2008.07.034 ↗