journal article·2020-04

Formation, structure and properties of pseudo-high entropy clustered bulk metallic glasses

A. Inoue, F.L. Kong, S.L. Zhu, B.L. Shen, A. Churyumov, W.J. Botta

Publisher page

Abstract

Abstract The formation, structure and properties of clustered glassy alloys were reviewed in correlation with pseudo-high entropy (PHE) type alloy components on the basis of our recent data. The features of the PHE bulk metallic glasses (BMGs) in Fe- and Zr-based alloy systems were also presented in comparison with high entropy glassy and crystalline alloys. The selection of PHE alloy compositions enables the formation of a clustered glassy phase in the wide temperature range below the onset temperature of the second exotherm peak. The presence of the glassy phase without appreciable precipitates even after the completion of the first exotherm peak has not been reported so far in spite of a large number of crystallization data on amorphous and glassy alloys. The precipitates at the temperatures just below the second exotherm peak for PHE Fe- and Zr-based glassy alloys are big cubic χ-FeCoNiCrMo(B) with a lattice parameter of about 0.90 nm and Zr2M (M = Al,Fe,Co,Ni,Ag) with a lattice parameter of about 1.2 nm, respectively. The precipitation of these metastable phases with large unit volumes needs long-range atomic rearrangements, but the atomic diffusivity in the PHE glassy alloys is very low, resulting in the formation of the clustered glassy phase. The clustered glassy alloys exhibit high strength and unprecedented plasticity for PHE Zr–Nb–Al–Ni–Cu BMGs, very high coercive force for Nd-Fe-Al BMGs, good soft magnetic properties in conjunction with better plasticity for PHE Fe–B–Si–P–Cu BMG and high thermal resistance to crystallization for PHE Zr–Al–Ni–Cu–Ag BMGs, and hence are expected to become important as a new type of engineering glassy material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Glass properties and applications · Phase-change materials and chalcogenides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Al-La-Ni amorphous alloys with a wide supercooled liquid region10.2320/matertrans1989.30.965 ↗
2. Production of amorphous cylinder and sheet of La55Al25Ni20 alloy by a metallic mold casting method10.2320/matertrans1989.31.425 ↗
4. Bulk glass-forming metallic alloys: science and technology10.1557/S0883769400053252 ↗
5. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
6. Recent development and application products of bulk glassy alloys10.1016/j.actamat.2010.11.027 ↗
7. Bulk glass formation of Ti-Zr-Hf-Cu-M (M= Fe, Co, Ni) alloys10.2320/matertrans.43.277 ↗
8. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
9. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
10. Murty · 2014
11. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
12. Relation between icosahedral short-range ordering and plastic deformation in Zr–Nb–Cu–Ni–Al bulk metallic glasses10.1016/j.actamat.2011.01.020 ↗
13. Effect of high-order multicomponent on formation and properties of Zr-based bulk glassy alloys10.1016/j.jallcom.2015.03.078 ↗
14. Peculiarities and usefulness of multicomponent bulk metallic alloys10.1016/j.jallcom.2016.11.228 ↗
15. Investigation of glass-forming ability, deformation and corrosion behavior of Ni-free Ti-based BMG alloys designed for application as dental implants10.1016/j.msec.2008.07.009 ↗
16. Crystallization process and glass stability of an Fe48Cr15Mo14C15B6Tm2 bulk metallic glass10.1103/PhysRevB.78.144205 ↗
17. Mechanical properties of soft magnetic (Fe0.76Si0.096B0.084P0.06)100−xCux (x=0 and 0.1) bulk glassy alloys10.2320/matertrans.ME200833 ↗
18. Influence of Ag replacement on supercooled liquid region and icosahedral phase precipitation of Zr65Al7.5Ni10Cu17.5-xAgx (x = 0–17.5 at%) glassy alloys10.1016/j.jallcom.2017.11.203 ↗
19. Influence of Ag replacement on the formation and heating-induced phase decomposition of Zr65Al7.5Co27.5-xAgx (x=5 to 20 at%) glassy alloys10.1016/j.jallcom.2018.12.305 ↗
20. Hard magnetic bulk amorphous Nd-Fe-Al alloys of 12 mm in diameter made by suction casting10.2320/matertrans1989.37.636 ↗
21. Bulk Nd–Fe–Al amorphous alloys with hard magnetic properties10.2320/matertrans1989.37.99 ↗
22. Atomic ordering and magnetic properties in Nd50Fe40Al10 glassy hard magnets
24. Bulk amorphous and partially crystallized alloys in Nd-Fe-(Al, B) system with hard magnetic properties prepared by arc melting10.2320/matertrans.43.1985 ↗
25. Amorphous high-carbon alloy steels rapidly quenched from melts10.2320/matertrans1960.19.303 ↗
26. Mechanical properties and thermal stability of new type amorphous high-carbon alloy steels
27. Nonequilibrium phases in Fe-X-C (X= Cr, Mo or W) ternary alloys quenched rapidly from melts10.2320/matertrans1960.22.197 ↗
28. Synthesis of Fe–Cr–Mo–C–B–P bulk metallic glasses with high corrosion resistance10.1016/S1359-6454(01)00366-4 ↗
29. Corrosion resistance of Fe-16%Cr-30%Mo-(C,B,P) amorphous coatings sprayed by HVOF and APS processes10.2320/matertrans.46.80 ↗
30. Fe-based glassy alloy coating by high velocity oxy-fuel (HVOF) spraying process
31. Iron-based amorphous metals: high-performance corrosion-resistant material development10.1007/s11661-008-9779-8 ↗
32. Development of the glassy metal coating by thermal spray and application for the Pb-free solder erosion resistant10.2320/materia.46.31 ↗
33. Characteristics and practical application of thermal spraying metallic glasses coating (GALOA) (In Japanese)
34. Structural amorphous steels10.1103/PhysRevLett.92.245503 ↗
35. Fe-based bulk metallic glasses with diameter thickness larger than one centimeter10.1557/JMR.2004.0176 ↗
36. Fe-(Cr, Mo)-(C, B)-Tm bulk metallic glasses with high strength and high glass-forming ability
37. Quasicrystal-like structure and its crystalline approximant in an Fe48Cr15Mo14C15B6Tm2 bulk metallic glass10.1016/j.jallcom.2010.03.222 ↗
38. Suryanarayana · 2017
39. A structural model for metallic glasses10.1038/nmat1219 ↗
40. Atomic packing and short-to-medium-range order in metallic glasses10.1038/nature04421 ↗
41. The efficient cluster packing model – an atomic structural model for metallic glasses10.1016/j.actamat.2006.06.002 ↗
42. Direct observation of local atomic order in a metallic glass10.1038/nmat2897 ↗
43. Correlation of atomic packing with the boson peak in amorphous alloys10.1063/1.4896765 ↗
44. Crystal growth limitation as a critical factor for formation of Fe-based bulk metallic glasses10.1016/j.actamat.2014.09.025 ↗
45. Quasicrystals from glass devitrification10.1016/S0022-3093(02)01988-9 ↗