Fabrication and scintillation properties of Pr:Lu3Al5O12 transparent ceramics from co-precipitated nanopowders
Source abstract
Abstract
Abstract Sintering aids may seriously deteriorate the luminescence properties of the ceramics especially for scintillators. In this work, 0.25 at%Pr:Lu3Al5O12 transparent ceramics were prepared from the co-precipitated nanopowders without any sintering aids. Ammonium hydrogen carbonate was used as precipitant and the influences of precipitant to metal ions molar ratio on nanopowders and ceramics were investigated. Excessive or insufficient precipitant will worsen the phase-purity and dispersity of the nanopowders. The nonuniform dissolution of the Lu and Al precipitants in the titration and washing process, which results in the nonstoichiometry of Al excess in the ceramics and deteriorates the optical quality. After optimizing the ratio of Lu/Al in raw powders, Pr:Lu3Al5O12 ceramics with the in-line transmittance above 80% in the visible band were obtained. The light yield is 7086 Ph/MeV and the energy resolution is 16.9% which is inferior to that of the good Pr:Lu3Al5O12 crystal. The low valent cation impurities in the raw material increase the concentration of Pr4+ and diminish the light yield.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Radiation Detection and Scintillator Technologies · Luminescence Properties of Advanced Materials · Atomic and Subatomic Physics Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Inorganic scintillators: today and tomorrow10.1016/S0022-2313(02)00423-4 ↗
2. Recent R&D trends in inorganic single-crystal scintillator materials for radiation detection10.1002/adom.201400571 ↗
3. Inorganic scintillators—a basic material for instrumentation in physics10.1016/j.nima.2004.07.221 ↗
4. Inorganic-scintillator development10.1016/S0168-9002(00)01088-3 ↗
5. Photo- and radioluminescence of Pr-doped Lu3Al5O12 single crystal10.1002/pssa.200409079 ↗
6. Light yield and light loss coefficient of LuAG:Ce and LuAG:Pr under excitation with α- and γ-rays10.1016/j.jcrysgro.2016.10.022 ↗
7. Ceramic scintillators
8. Comparative study of ceramic and single crystal Ce:GAGG scintillator10.1016/j.optmat.2013.07.002 ↗
9. Cherepy · 2015
10. Antisite defect-free Lu3(GaxAl1−x)5O12:Pr scintillator10.1063/1.2191741 ↗
11. Role of Y admixture in host luminescence-free (Lu1-xYx)3Al5O12:Pr ceramic scintillators10.1103/PhysRevApplied.6.064026 ↗
12. Effect of Pr-codoping on the X-ray induced afterglow of (Y, Gd)2O3:Eu10.1016/0022-3697(95)00023-2 ↗
13. Gd2O2S:Pr scintillation ceramics from powder synthesized by a novel carbothermal reduction method10.1111/jace.13600 ↗
14. Development of an event-by-event based radiation imaging detector using GGAG: a ceramic scintillator for X-ray CT10.1016/j.nima.2018.05.029 ↗
15. Scintillator delivers CT imaging revolution
16. Fabrication and optical properties of Nd:YAG ceramics for solid-state laser10.1111/j.1151-2916.1995.tb08433.x ↗
17. Ceramic laser materials10.1038/nphoton.2008.243 ↗
18. Fabrication and laser oscillation of Yb:Sc2O3 transparent ceramics from co-precipitated nano-powders10.1016/j.jeurceramsoc.2017.10.027 ↗
19. Ceramic planar waveguide laser of non-aqueous tape casting fabricated YAG/Yb:YAG/YAG
20. A kind of bilayer structure ceramic scintillators designed for phoswich detectors10.1111/jace.15080 ↗
21. Fabrication and optical properties of high-performance polycrystalline Nd:YAG ceramics for solid-state lasers10.1111/j.1151-2916.1995.tb08433.x ↗
22. The role of air annealing on the optical and scintillation properties of Mg co-doped Pr:LuAG transparent ceramics10.1016/j.optmat.2017.05.054 ↗
23. Spectroscopic and crystallographic studies of YAG:Pr4+ single crystals10.1016/S0925-8388(98)00340-5 ↗
24. Luminescence and scintillation properties of Mg-codoped LuAG:Pr single crystals annealed in air10.1016/j.jlumin.2016.09.025 ↗
25. Effects of Ca2+ co-doping on the scintillation properties of LSO:Ce10.1109/TNS.2007.913486 ↗
26. Effect of Mg2+ co-doping on the scintillation performance of LuAG:Ce ceramics10.1002/pssr.201308199 ↗
27. The harmful effects of sintering aids in Pr:LuAG optical ceramic scintillator10.1111/j.1551-2916.2012.05275.x ↗
28. Fabrication and scintillation properties of highly transparent Pr:LuAG ceramics using Sc,La-based isovalent sintering aids10.1016/j.ceramint.2012.12.065 ↗
29. The influences of stoichiometry on the sintering behavior, optical and scintillation properties of Pr:LuAG ceramics10.1016/j.jeurceramsoc.2018.05.014 ↗
30. Suppression of the slow scintillation component of Pr:Lu3Al5O12 transparent ceramics by increasing Pr concentration10.1016/j.jlumin.2019.01.036 ↗
31. Co-precipitation synthesis route to yttrium aluminum garnet (YAG) transparent ceramics10.1016/j.jeurceramsoc.2012.02.040 ↗
32. Scintillation properties of transparent ceramic Pr:LuAG for different Pr concentration10.1109/TNS.2012.2189583 ↗
33. Synthesis of YAG nanopowder by the co-precipitation method: influence of pH and study of the reaction mechanisms10.1016/j.jssc.2012.02.063 ↗
34. Synthesis of Yb:Lu3Al5O12 nano powders with the reverse strike co-precipitation method: influence of decomposition of NH4HCO310.1016/S1002-0721(16)60113-8 ↗
35. Fabrication and scintillation performance of nonstoichiometric LuAG:Ce ceramics10.1111/jace.13305 ↗
36. Influence of sulfate ions on properties of co-precipitated Y3Al5O12:Nd3+nanopowders10.1016/j.jallcom.2010.08.046 ↗
37. Co-precipitation synthesis and sintering of yttrium aluminum garnet (YAG) powders: the effect of precipitant10.1016/S0955-2219(00)00116-3 ↗
38. Influence of pH values on (Nd+Y):Al molar ratio of Nd:YAG nanopowders and preparation of transparent ceramics10.1016/j.jallcom.2010.05.048 ↗
39. Post-treatment of nanopowders-derived Nd:YAG transparent ceramics by hot isostatic pressing10.1016/j.ceramint.2017.05.015 ↗
40. Observations on the rare earths. LXI. Precipitation of hydrous oxides or hydroxides from perchlorate solutions10.1021/ja01153a530 ↗
41. Synthesis of yttrium aluminum garnet (YAG) powder by homogeneous precipitation combined with supercritical carbon dioxide or ethanol fluid drying10.1016/j.jeurceramsoc.2008.05.005 ↗
42. Solubility products of the rare-earth carbonates10.1021/je00043a013 ↗
43. Fabrication of Tb3Al5O12 transparent ceramics using co-precipitated nanopowders: the influence of ammonium hydrogen carbonate to metal ions molar ratio10.1016/j.ceramint.2017.07.225 ↗
44. Large size single crystal growth of Lu3Al5O12:Pr and their uniformity of scintillation properties10.1016/j.jcrysgro.2011.11.079 ↗
45. Development of LuAG-based scintillator crystals–a review10.1016/j.pcrysgrow.2013.02.001 ↗