Microstructural and core loss behaviors of addictive Fe-17 at% P based on Fe-3.5 wt% Si alloys in powder injection molding

Abstract This study investigated Fe-17 at% P addition effects on the magnetic properties of Fe-3.5 wt% Si alloys to enhance the electrical resistivity and core loss in powder injection molding. Considering the lowest melting point for 17 at% of P in the Fe-P phase diagram, the effect of P in Fe-3.5 wt% Si was analyzed by adding Fe-17 at% P from 0 to 12 wt% with 4 wt% increments. The feedstocks were prepared based on the processing optimization with respect to the critical solid loading, mixing homogeneity, and binder decomposition. The microstructure; relative density; electrical resistivity; and C, O, N, and S impurities of the sintered alloys were analyzed in correlation with the magnetic properties. The magnetic induction (B5000), maximum permeability, coercivity at 400 Hz and core loss in the frequency range from 50 to 1000 Hz at 1 T were analyzed. The higher magnetic induction and the lower eddy current loss with increasing Fe-17 at% P addition were induced by the higher relative density and electrical resistivity, respectively.