journal article·2018-04

Interactions between helium, hydrogen and intrinsic point defects in TaC crystal

Dan Sun, Jianhua Ding, Shaosong Huang, Pengbo Zhang, Jijun Zhao

Publisher page

Abstract

Abstract Tantalum carbide is not only an important precipitate in reduced-activation steels, but also an ultrahigh-temperature ceramic useful for protective coating. Under 14 MeV neutron irradiation, He and H atoms are produced from the (n, α) and (n, p) transmutation reactions, respectively, along with certain amount point defects created by cascades in the materials. In order to understand the role of TaC precipitates on the clustering of He/H in RAFM steels under irradiation, the energetics and stability of helium (He) atoms, hydrogen (H) atoms and intrinsic point defects inside TaC crystal have been systemically investigate by first-principles calculations. From energetic point of view, the C vacancy and interstitial defects are more stable than those of Ta. H impurity has two stable interstitial sites in TaC, while other atoms (He, C, or Ta) has only one stable site. With a pre-existing vacancy, H prefers to occupy an interstitial site in the space of the monovacancy rather than the vacancy center, while He sits the vacancy center. Both He and H exhibit high diffusion barriers (0.73 eV for He and 0.31–0.44 eV for H) between two interstitial sites. He-He pair has stronger attraction than H-H, while the binding of C/Ta/Fe-He pair is stronger than C/Ta/Fe-H pair. These results suggest that He atoms are easier to form cluster with C/Ta/Fe interstitial atom. We further discuss the stability of small He x H y , He x -vacancy and H y -vacancy clusters. The formation energy of mixed He x H y cluster increases linearly with the total number of He and H atoms, while the pure H y clusters is more stable than the He x clusters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Electronic structure and optical properties of TaC from the first principles calculation10.1140/epjb/e2005-00127-2 ↗
2. Titanium carbide thin films obtained by reactive magnetron sputtering10.1016/0042-207X(86)90327-1 ↗
3. Physiso-chemical and thermophysical properties of cubic binary carbides10.1002/(SICI)1521-4079(1998)33:3<341::AID-CRAT341>3.0.CO;2-I ↗
4. TiC and TaC deposition by pulsed laser ablation: a comparative approach10.1016/S0169-4332(00)00900-4 ↗
5. Synthesis, microstructural characterization, and mechanical property evaluation of vacuum plasma sprayed tantalum carbide10.1111/j.1551-2916.2005.00899.x ↗
6. Irradiation effects on precipitate in reduced-activation ferritic/martensitic steels10.2320/matertrans.46.469 ↗
7. Effect of TaC particles dissolution on grain coarsening in reduced activation steels10.1016/S1006-706X(12)60033-8 ↗
8. Research and development on the China low activation martensitic steel (CLAM)10.1016/j.jnucmat.2007.03.236 ↗
9. Investigations on coarsening of MX and M 23 C 6 precipitates in 12% Cr creep resistant steels assisted by computational thermodynamics10.1016/j.msea.2010.05.084 ↗
10. Long-term stability of TaC particles during tempering of 8% Cr–2% W steel10.1016/j.jnucmat.2007.03.154 ↗
11. Effect of MX type particles on creep strength of ferritic steel10.1016/S0022-3115(03)00281-2 ↗
12. Phonon spectra in TaC and HfC10.1103/PhysRevLett.25.1611 ↗
13. Status of reduced activation ferritic/martensitic steel development10.1016/j.jnucmat.2007.03.036 ↗
14. Mechanical properties of unirradiated and irradiated reduced-activation martensitic steels with and without nickel compared to properties of commercial steels10.1016/j.jnucmat.2007.08.006 ↗
15. High-throughput design of low-activation, high-strength creep-resistant steels for nuclear-reactor applications10.1016/j.jnucmat.2015.11.052 ↗
16. The effect of tantalum on the mechanical properties of a 9Cr–2W–0.25V–0.07Ta–0.1C steel1Research sponsored by the office of fusion energy sciences, U.S. Department of energy, under contract DE-AC05-960R22464 with lockheed martin energy Research Corp.110.1016/S0022-3115(99)00035-5 ↗
17. Effects of small changes in alloy composition on the mechanical properties of low activation 9%Cr-2%W steel10.1016/0022-3115(91)90178-A ↗
18. Microstructure property analysis of HFIR-irradiated reduced-activation ferritic/martensitic steels10.1016/j.jnucmat.2004.04.053 ↗
19. Effect of chromium, tungsten, tantalum, and boron on mechanical properties of 5–9Cr–WVTaB steels10.1016/S0022-3115(02)00885-1 ↗
20. Status of reduced activation ferritic/martensitic steel development10.1016/j.jnucmat.2007.03.036 ↗
21. Effect of tantalum content on microstructure and tensile properties of CLAM steel10.1016/j.fusengdes.2016.01.016 ↗
22. Mechanical properties of 8Cr–2WVTa steel aged for 30000 h10.1016/S0022-3115(00)00138-0 ↗
23. Metallurgical characterization of the reduced activation ferritic/martensitic steel Eurofer'97 on as-received condition10.1016/S0920-3796(01)00563-4 ↗
24. Microstructural analysis of neutron-irradiated martensitic steels10.1016/0022-3115(96)00165-1 ↗
25. Investigations on the growth kinetics of Laves phase precipitates in 12% Cr creep-resistant steels: experimental and DICTRA calculations10.1016/j.actamat.2010.07.033 ↗
26. Recent status and improvement of reduced-activation ferritic-martensitic steels for high-temperature service10.1016/j.jnucmat.2016.07.054 ↗
27. Crystal structure of NaCl-type transition metal monocarbides MC (M= V, Ti, Nb, Ta, Hf, Zr), a neutron powder diffraction study10.1016/j.mseb.2007.09.040 ↗
28. A time-resolved diffraction study of the Ta–C solid combustion system10.1557/JMR.1993.1533 ↗
29. Wear mechanisms in high speed steel reinforced with (NbC) p and (TaC) p MMCs10.1016/S0043-1648(00)00329-X ↗
30. Solubility product and precipitate of TaC in Fe–8Cr–2W steel10.1016/S0022-3115(98)00151-2 ↗
31. Control of precipitate behavior in reduced activation steels by intermediate heat treatment10.1016/j.msea.2011.05.084 ↗
32. Microstructure and its influence on mechanical properties of CLAM steel10.1016/j.fusengdes.2012.06.008 ↗
33. Creep deformation of iron strengthened by MX type particles10.1016/j.jnucmat.2004.04.046 ↗
34. Stability of the strengthening nanoprecipitates in reduced activation ferritic steels under Fe 2+ ion irradiation10.1016/j.jnucmat.2013.11.003 ↗
35. Stability of MX-type strengthening nanoprecipitates in ferritic steels under thermal aging, stress and ion irradiation10.1016/j.actamat.2014.03.015 ↗
36. FP-LAPW investigation of electronic structure of TaN and TaC compounds10.1016/j.commatsci.2004.12.010 ↗
37. Electronic structure, Compton profiles and optical properties of TaC and TaN10.1016/j.radphyschem.2010.06.009 ↗
38. Ab initio molecular dynamics for liquid metals10.1016/0022-3093(95)00355-X ↗
39. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
40. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
41. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
42. X-ray spectra and features of the electron energy structure of TaC, TaN, HfC, TaC0.5N0.5, and Hf0.5Ta0.5C10.1007/s10947-007-0070-4 ↗
43. A fast and robust algorithm for Bader decomposition of charge density10.1016/j.commatsci.2005.04.010 ↗
44. Vacancy trapping mechanism for multiple hydrogen and helium in beryllium: a first-principles study
45. Interaction between helium and intrinsic point defects in 3C-SiC single crystal10.1063/1.4985604 ↗
46. He-induced vacancy formation in bcc Fe solid from first-principles simulation10.1016/j.jnucmat.2013.09.048 ↗
47. Magnetic interactions influence the properties of helium defects in iron10.1103/PhysRevLett.94.046403 ↗
48. Trapping helium in Y2Ti2O7 compared to in matrix iron: a first principles study10.1063/1.4871282 ↗
49. Development of next generation tempered and ODS reduced activation ferritic/martensitic steels for fusion energy applications10.1088/1741-4326/57/9/092005 ↗
50. Ab initio investigation of helium in Y 2 Ti 2 O 7: mobility and effects on mechanical properties10.1016/j.jnucmat.2016.05.024 ↗
51. Radiation-induced Ostwald ripening in oxide dispersion strengthened ferritic steels irradiated at high ion dose10.1016/j.actamat.2014.06.060 ↗
52. First-principles investigation of helium in Y2O3
53. First principles assessment of helium trapping in Y2TiO5 in nano-featured ferritic alloys10.1063/1.4897503 ↗
54. Helium sequestration at nanoparticle-matrix interfaces in helium + heavy ion irradiated nanostructured ferritic alloys10.1016/j.jnucmat.2016.10.038 ↗
55. Ab initio study of helium in α− Fe: dissolution, migration, and clustering with vacancies10.1103/PhysRevB.72.064117 ↗
56. Interplay between hydrogen and vacancies in α-Fe10.1103/PhysRevB.87.174103 ↗
57. The effect of point defects on diffusion pathway within α -Fe
58. He–He and He–metal interactions in transition metals from first-principles10.1016/j.jnucmat.2015.09.039 ↗
59. Stability and clusterization of hydrogen-vacancy complexes in α-Fe: an ab initio study10.1103/PhysRevB.67.174105 ↗
60. He diffusion in irradiated α-Fe: an ab-initio-based rate theory model10.1103/PhysRevB.75.100102 ↗
61. Interaction between helium and self-defects in α-iron from first principles10.1016/j.jnucmat.2007.03.002 ↗