journal article·2017-06

Production and characterization of a tool steel-PSZ composite by mechanical alloying and spark plasma sintering

Faraz Deirmina, Massimo Pellizzari

Publisher page

Abstract

Abstract Tool steel matrix composites show improved hardness and remarkable wear resistance but generally also a systematic lower fracture toughness than the base material. The present work deals with the feasibility and characterization of a powder metallurgical hot work tool steel reinforced with partially stabilized zirconia (PSZ). Selection of PSZ as the reinforcement is aimed at improving the strength and fracture toughness of the composite by taking advantage of the transformation toughening effect of PSZ. The specimens were produced by mechanical alloying (MA) followed by spark plasma sintering (SPS) using two different types of PSZ, different volume fractions (10 and 20 vol %) and sizes of reinforcement. The influence of processing parameters on density and microstructure was investigated. The chemical stability of the tool steel-PSZ system was also studied looking at the possible formation of complex oxides and precipitates during the fast consolidation by SPS.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Particulate reinforced metal matrix composites — a review10.1007/BF00544448 ↗
2. Processing and properties of particulate reinforced steel matrix composites10.1016/S0921-5093(97)00710-7 ↗
3. On the strength of discontinuous silicon carbide reinforced aluminum composites10.1016/0036-9748(86)90210-3 ↗
4. Proceedings of the international conference on low energy dislocation structures dislocation generation due to differences between the coefficients of thermal expansion10.1016/0025-5416(86)90261-2 ↗
5. Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites10.1016/j.msea.2006.10.184 ↗
6. Mechanical behavior of particle reinforced metal matrix composites10.1002/1527-2648(200106)3:6<357::AID-ADEM357>3.0.CO;2-I ↗
7. Sviluppo di un acciaio per lavorazione a caldo rinforzato tramite alligazione meccanica
8. Microstructure and mechanical properties of hot work tool steel matrix composites produced by hot isostatic pressing10.1179/pom.1997.40.1.55 ↗
9. Effect of particle size on fracture toughness of SiC/Al composite material10.1016/0001-6160(89)90039-4 ↗
10. Ceramic steel?10.1038/258703a0 ↗
11. Friction and wear of partially stabilized zirconia: basic science and practical applications10.1016/0043-1648(84)90021-8 ↗
12. Transformation toughening in zirconia-containing ceramics10.1111/j.1151-2916.2000.tb01221.x ↗
13. Reinforcing mechanism of Mg-PSZ particles in highly-alloyed TRIP steel10.1002/srin.201100099 ↗
14. Strength and failure behaviour of spark plasma sintered steel-zirconia composites under compressive loading10.1002/srin.201100082 ↗
15. Role of zirconia toughening in the abrasive wear of intermetallic and ceramic composites10.1016/S0043-1648(97)00114-2 ↗
16. Influence of particle size and volume fraction on damage and fracture in Al–Al3 Ti composites and micromechanical modelling using the GTN model10.1046/j.1460-2695.1998.00113.x ↗
17. The effect of matrix to reinforcement particle size ratio (PSR) on the microstructure and mechanical properties of a P/M processed AlCuMn/SiCp MMC10.1016/j.msea.2004.04.040 ↗
18. Microstructure and mechanical properties of 6061 Al alloy based composites with SiC nanoparticles10.1016/j.jallcom.2014.01.134 ↗
19. Comparison of wear resistant MMC and white cast iron10.1016/S0043-1648(02)00300-9 ↗
20. Selection of particulate reinforcement in P/M metal matrix composites10.1016/S0924-0136(96)00013-1 ↗
21. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
22. Mechanism of spark plasma sintering
23. Nanostructured/ultrafine multiphase steel with enhanced ductility obtained by mechanical alloying and spark plasma sintering of powders10.1016/j.msea.2009.03.021 ↗
24. 2015
25. Combined texture and structure analysis of deformed limestone from time-of-flight neutron diffraction spectra10.1063/1.364220 ↗
26. ASTM B962-15 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes' Principle. https://www.astm.org/Standards/B962.htm (Accessed 3 September 2016).
27. ASTM E92-82 · 2003
28. Instabilities and ductility of nanocrystalline and ultrafine-grained metals10.1016/S1359-6462(03)00396-8 ↗
29. Nanocrystalline metals prepared by high-energy ball milling10.1007/BF02646980 ↗
30. Microstructural changes during annealing of work-hardened mechanically milled metallic powders (overview)10.2320/matertrans1989.36.289 ↗
31. Absorption contrast effects in the quantitative XRD analysis of powders by full multiphase profile refinement10.1107/S002188989000841X ↗
32. XRD microstructural characterization of tetragonal pure zirconia powders obtained by controlled hydrolysis of zirconium alkoxides10.1017/S0885715600016808 ↗
33. Characterization and stabilization of metastable tetragonal ZrO210.1111/j.1151-2916.1974.tb10823.x ↗
34. Effect of microscale shear stresses on the martensitic phase transformation of nanocrystalline tetragonal zirconia powders10.1016/j.jeurceramsoc.2010.05.025 ↗
35. Monoclinic to cubic phase transformation of ZrO2 induced by ball milling10.1023/B:JMSC.0000020034.10514.d3 ↗
36. X-ray diffraction study of microstructural evolution of some ZrO2–Y2O3–MgO powder mixtures induced by high-energy ball milling10.1016/j.jallcom.2004.02.013 ↗
37. Size-dependent inelastic behavior of particle-reinforced metal–matrix composites10.1016/S0266-3538(00)00235-9 ↗
38. Influence of processing parameters and particle size on the properties of hot work and high speed tool steels by Spark Plasma Sintering10.1016/j.matdes.2010.12.033 ↗
39. Fracture toughness of nanocrystalline tetragonal zirconia with low yttria content10.1016/S1359-6454(02)00283-5 ↗
40. Bonding of TRIP-steel/Al2O3-(3Y)-TZP composites and (3Y)-TZP ceramic by a spark plasma sintering (SPS) apparatus10.3390/ma9070558 ↗
41. Effect of heat treatment on grain size, phase assemblage, and mechanical properties of 3 mol% Y-TZP10.1111/j.1151-2916.1996.tb08980.x ↗
42. Interfacial reactions in TRIP-steel/ZrO2 composites10.1002/srin.201100132 ↗
43. Effect of thermal expansion coefficients on the martensitic transformation in a steel matrix composite10.1016/S0956-716X(95)00529-5 ↗
44. Elastic properties of ceramic oxides used in solid oxide fuel cells (SOFC)10.1016/S0955-2219(96)00247-6 ↗
45. Thermal expansion coefficient of yttria stabilized zirconia for various yttria contents10.1016/j.ssi.2004.08.021 ↗
46. Mura · 2013
47. Effect of debonding at the phase interface on Young's modulus of sintered PSZ/stainless steel composite10.2320/matertrans1989.35.814 ↗
48. Compressive and tensile deformation behaviour of TRIP steel-matrix composite materials with reinforcing additions of zirconia and/or aluminium titanate10.1016/j.jallcom.2016.10.176 ↗
49. Investigations on the sintering response of steel-ceramic composites10.1088/1757-899X/139/1/012013 ↗
50. Pressureless sintering of 3Y-TZP/stainless-steel composite layers10.1111/j.1551-2916.2008.02658.x ↗
51. Active metal brazing of zirconia10.1016/S1359-6454(00)00256-1 ↗
52. The correlation of local deformation and stress-assisted local phase transformations in MMC foams10.1016/j.matchar.2015.06.020 ↗