journal article·2014-02

Observation of melt puddle behavior in planar flow casting in air

Ryu Seino, Yuichi Sato

Publisher page

Abstract

Abstract Planar Flow Casting (PFC) is well known as an industrial technique for rapid quenching to produce amorphous ribbon used mainly as soft magnetic materials. However, formation mechanism of amorphous ribbon in PFC is not clear still now. On the other hand, in Chill Block Melt Spinning (CBMS) which is developed before PFC, it is clear that behavior of melt puddle, formed on the surface of quickly rotating wheel when the molten alloy stream impinges on it, determines the thickness of amorphous ribbon. Observation of the melt puddle in PFC is unfortunately limited in casting in vacuum. So, formation mechanism of amorphous ribbon does not appear to have been extensively studied. In the present work, new photographing technique has been investigated to observe the melt puddle. As the result, more clear photographs have been obtained in casting in air. Furthermore, we have tried to make clear the difference between in casting in vacuum and in air. Ni78Si8B14 alloy is used in this work. The alloy melted by induction heating in quartz crucible is impinged on Cu–1%Cr roll of 300 mm diameter by argon gas pressure through rectangular nozzle of 0.6 × 20 mm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Fashion and Cultural Textiles · Fluid Dynamics and Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. J.R. Bedell, Extended retention of melt spun ribbon on quenching wheel, US Pat. 3, 862, 658, 1975.
2. Liebermann · IEEE Trans. Magn. · 1976 · 12 · 92110.1109/TMAG.1976.1059201 ↗
3. H. Hillmann, H.R. Hilzinger, On the formation of amorphous ribbon by the melt spin technique, in: Proc. 3rd Int. Conf. on Rapidly Quenched Metals, vol. I, Metals Society, London, 1978, p. 22.
4. P.H. Shingu, K. Kobayashi, R. Suzuki, K. Takeshita, Cooling process of the single roller chill block casting, in: Proc. 4th Int. Conf. on Rapidly Quenched Metals, vol. I, Japan Institute of Metals, Sendai, 1981, p. 57.
5. Kavesh · 1978 · 36
6. M.C. Narasimhan, Continuous casting method for metallic amorphous strips, US Pat. 4, 221, 257, 1980.
7. Sato · Mater. Sci. Eng. · 1988 · 99 · 7310.1016/0025-5416(88)90295-9 ↗
8. Ma · Acta Metall. Mater. · 1992 · 40–2 · 25110.1016/0956-7151(92)90300-4 ↗
9. Wilde · Mater. Sci. Eng. · 1992 · 150A · 23710.1016/0921-5093(92)90117-J ↗
10. Byrne · Chem. Eng. Sci. · 2006 · 61 · 800410.1016/j.ces.2006.06.026 ↗
11. Bussmann · Int. J. Heat Mass Transfer · 2002 · 45 · 399710.1016/S0017-9310(02)00112-6 ↗
12. Sato · Trans. Jpn. Soc. Mech. Eng. · 1995 · 61–588 · 260
13. Ruhl · Mater. Sci. Eng. · 1967 · 1 · 31310.1016/0025-5416(67)90013-4 ↗
14. Huang · Metall. Trans. · 1981 · 12A · 110710.1007/BF02643492 ↗