journal article·2016-01

Evaluation of copper brazed joint failure by thermal-fatigue test applicable in heat exchangers

M. Tajfar, E. Ganjeh, M.H. Mirbagheri

Publisher page

Abstract

Abstract Ag-based brazing filler (Ag–15Cu–16Zn–24Cd) was applied for bonding copper specimens. The brazing temperatures and holding times employed in this study were 660 °C–720 °C and 10–20 min, respectively. The joints mainly consisted of Ag-rich matrix along with some intermetallic compounds like CuZn 5 and Cu solid solution. Optimum shear strength achieved was measured to be 73.6 MPa. Thermal-fatigue test was performed on copper brazed specimens within the designed temperature range of 320, 420 and 580 °C. Fracture strength values at three different temperatures were determined at a constant number of 100 thermal cycles. Fractography analysis revealed that all cracks propagated along the center regions which adopted ductile morphology changing to brittle one by increasing the test temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. CuproBraze mobile heat exchanger technology
2. Torsional strength and failure of copper alloy brazing joint10.1016/j.engfailanal.2014.11.008 ↗
3. New brazing processes using anneal-resistant copper and brass alloys10.1016/S0261-3069(03)00162-6 ↗
4. The interfacial reactions of infrared brazing Cu and Ti with two silver-based braze alloys10.1016/j.jallcom.2003.09.155 ↗
5. Study on microstructure and property of brazed joint of AgCuZn-X(Ga, Sn, In, Ni) brazing alloy10.1016/S1875-5372(10)60087-2 ↗
6. Study on the microstructure and mechanical properties of diffusion brazing joint of C17200 copper beryllium alloy10.1016/j.matdes.2013.07.080 ↗
7. Investigation of gap filling ability of Ag–Cu–In brazing filler metals10.1016/j.jallcom.2010.05.129 ↗
8. Evaluate of braze joint strength and microstructure characterize of titanium-CP with Ag-based filler alloy10.1016/j.matdes.2012.01.045 ↗
9. 1993 · vol. 6
10. Dieter · 2001
11. Effect of microstructural constituents on the thermal fatigue life of A319 aluminum alloy10.1016/j.msea.2007.01.018 ↗
12. AWS A5.8 · 1992
13. AWS · 1982
14. Brazing of titanium to steel with different filler metals: analysis and comparison10.1007/s10853-010-4357-z ↗
15. Increasing Ti–6Al–4V brazed joint strength equal to the base metal by Ti and Zr amorphous filler alloys10.1016/j.matchar.2012.05.016 ↗
16. Microstructural, mechanical and fractographical study of titanium-CP and Ti–6Al–4V similar brazing with Ti-based filler10.1016/j.msea.2012.08.043 ↗
17. 1998 · vol. 9
18. Microstructural association between mechanical behavior with bending fracture surfaces in Astaloy CrA sintered parts alloyed by Cu and C10.1016/j.matdes.2013.10.072 ↗
19. Brandes · 1992
20. 1992 · vol. 3
21. A.S.M.I.H. Committee · 1992
22. Thermal fatigue of stainless steels
23. Hertzberg · 1996