Effect of pH on the microstructure and antibacterial properties of MgO nanoparticles by microwave-assisted solution combustion
Source abstract
Abstract
The application of magnesium oxide (MgO) nanoparticles as a candidate material for antibacterial purposes has been limited by their relatively low antibacterial activity. In this study, antibacterial MgO nanoparticles were synthesised in one step using magnesium nitrate and citric acid as raw materials using an economical and environmentally friendly microwave-assisted solution combustion approach, while the effect of the pH of the reaction system (2, 4, and 7) on the structure and antimicrobial properties of the synthesised MgO nanoparticles was investigated. X-ray diffraction (XRD) analysis demonstrated the formation of cubic-phase MgO nanoparticles, and electron microscopy studies confirmed that MgO nanoparticles synthesised at a precursor solution pH of 4 had uniform size distribution with a small microcrystalline size (∼19 nm) and spherical granular morphology. In addition, the results of the plate colony counting method showed that the antibacterial rate of MgO-4 against Gram-negative Escherichia coli (10 6 CFU/mL) at a sample concentration of 100 μg/mL was as high as 99.86 %, which showed excellent antibacterial performance. These findings provide valuable insights into how to increase the degree of oxygen adsorption on the sample surface to participate in the reaction, as well as a potential method for constructing nanomaterials with high antimicrobial activity.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Oxide Properties and Applications · Nanoparticles: synthesis and applications · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Effect of nano-TiO2 and nano-SiO2 addition on the morphological control of α-Al2O3 platelets via solid-state reaction10.1016/j.ceramint.2015.09.049 ↗
2. Facile homogeneous precipitation method to prepare MnO2 with high performance in catalytic oxidation of ethyl acetate10.1016/j.cej.2021.129246 ↗
3. Crystal growth behavior and fluorescence properties of LaMgAl11O19: Eu3+ nano-powders prepared via sol-gel process10.1016/j.ceramint.2022.11.242 ↗
4. Facile hydrothermal synthesis of ZnO nanoparticles on silicalite-1: effect of ultra ZnO Nano size on desulfurization activities
5. One-step synthesis of CoAl2O4 inorganic pigment by solution combustion: the impact of fuel and ammonium nitrate10.1016/j.ceramint.2023.09.205 ↗
6. Effect of lattice strain on structure, morphology, electrical conductivity and magneto-optical and catalytic properties of Ni-doped Mn3O4 nano-crystallites synthesized by microwave route10.1016/j.jscs.2022.101440 ↗
7. Microwave-assisted synthesis of a TiO2-CuO heterojunction with enhanced photocatalytic activity against tetracycline10.1016/j.apsusc.2020.146344 ↗
8. TiO2/activated carbon synthesized by microwave-assisted heating for tetracycline photodegradation10.1016/j.envres.2022.113837 ↗
9. Microwave-assisted biosynthesis of ZnO-GO particles using orange peel extract for photocatalytic degradation of methylene blue10.1016/j.jece.2022.108924 ↗
10. Microwave-assisted solution combustion synthesis of Fe3O4 powders10.1016/j.ceramint.2017.07.216 ↗
11. One-pot microwave-assisted combustion synthesis of Ni-Al2O3 nanocatalysts for hydrogen production via dry reforming of methane10.1016/j.fuel.2020.119511 ↗
12. A review on the synthesis of metal oxide nanomaterials by microwave induced solution combustion
13. Synthesis of Mn3O4 nanoparticles via microwave combustion route for electrochemical energy storage application
14. An efficient and comparative adsorption of Congo red and Trypan blue dyes on MgO nanoparticles: kinetics, thermodynamics and isotherm studies10.1016/j.jma.2020.09.004 ↗
15. Solution combustion synthesis of nanoscale materials10.1021/acs.chemrev.6b00279 ↗
16. Synthesis of Fe3O4-decorated SiO2 nanostructure using rice husk as a source by microwave combustion for the development of a magnetically recoverable adsorbent10.1016/j.ceramint.2022.02.001 ↗
17. Green microwave-assisted combustion synthesis of zinc oxide nanoparticles with Citrullus colocynthis (L.) Schrad: characterization and biomedical applications10.3390/molecules22020301 ↗
18. Solution combustion synthesis of lithium orthosilicate as the tritium breeder: effects of microwave power and fuel-to-oxidizer ratio on phase, microstructure and sintering10.1016/j.ceramint.2021.04.219 ↗
19. Green synthesis of magnesium oxide nanoparticles and its applications: a review
20. Antibacterial potential of green magnesium oxide nanoparticles against rice pathogen Acidovorax oryzae10.1016/j.matlet.2020.128839 ↗
21. Insight into the impact of zinc doping on the structural, surface, and biological properties of magnasium oxide nanoparticles stabilized by Vateria indica (L.) fruit extract10.1016/j.ceramint.2021.07.131 ↗
22. An insight into the mechanism of antibacterial activity by magnesium oxide nanoparticles10.1039/D1TB00875G ↗
23. One-step solution combustion synthesis of pure Ni nanopowders with enhanced coercivity: the fuel effect10.1016/j.jssc.2017.05.043 ↗
24. Microwave assisted sol-gel synthesis of MgO nanoparticles and their catalytic activity in the synthesis of hantzsch 1, 4 dihydropyridines10.1016/S1872-2067(11)60431-2 ↗
25. Microwave-assisted synthesis of nanocrystalline MgO and its use as a bacteriocide10.1002/adfm.200500029 ↗
26. Rapid synthesis of nanocrystalline ZnO by a microwave-assisted combustion method10.1016/j.powtec.2012.03.042 ↗
27. Rapid synthesis of nanocrystalline Co3O4 by a microwave-assisted combustion method10.1016/j.powtec.2009.05.006 ↗
28. Microwave-assisted solution combustion synthesis of Fe3O4 powders10.1016/j.ceramint.2017.07.216 ↗
29. Solution combustion synthesis, energy and environment: best parameters for better materials10.1016/j.pcrysgrow.2018.03.001 ↗
30. Antibacterial activity of V-doped rod-like MgO crystals decorated with nanoflake layer10.1016/j.ceramint.2021.12.272 ↗
31. Green synthesis and characterization of Mg0. 93Na0. 07O nanoparticles for antimicrobial activity, cytotoxicity and magnetic hyperthermia10.1016/j.ceramint.2022.06.146 ↗
32. Influence of pH on the physical and electromagnetic properties of Mg–Mn ferrite synthesized by a solution combustion method10.1016/j.matchar.2015.10.020 ↗
33. Solution combustion synthesis: towards a sustainable approach for metal oxides10.1002/chem.202000678 ↗
34. Combustion synthesis of porous MgO and its adsorption properties10.1007/s40090-019-0174-7 ↗
35. Effects of pH value on the microstructure and magnetic properties of solution combusted Fe3O4 powders10.1016/j.ceramint.2017.07.085 ↗
36. Photocatalytic performance and antibacterial mechanism of Cu/Ag-molybdate powder material10.1016/j.ceramint.2021.01.127 ↗
37. Enhanced boron adsorption onto synthesized MgO nanosheets by ultrasonic method10.1016/j.ultsonch.2016.07.029 ↗
38. Highly effective antibacterial activity of lithium-doped magnesium oxide particles synthesized by the microwave-assisted hydrothermal route10.1016/j.powtec.2020.05.031 ↗
39. Highly active MgO nanoparticles for simultaneous bacterial inactivation and heavy metal removal from aqueous solution10.1016/j.cej.2016.11.134 ↗
40. Synthesis and characterization of CuO nanoparticles utilizing waste fish scale and exploitation of XRD peak profile analysis for approximating the structural parameters
41. Hemoglobin self-assembly and antibacterial activities of bio-modified Ag-MgO nanocomposites by different concentrations of Artemisia haussknechtii and Protoparmeliopsis muralis extracts10.1016/j.ijbiomac.2019.10.207 ↗
42. Highly effective antibacterial activity and synergistic effect of Ag-MgO nanocomposite against Escherichia coli10.1016/j.jallcom.2016.05.179 ↗
43. Antibacterial property improvement of nano-MgO prepared by lithium doping under nitrogen calcination10.1016/j.ceramint.2020.12.187 ↗
44. Citrus limon assisted green synthesis of MgO nanoparticles: evaluation of phase, functional groups, surface morphology, thermal stability and colloidal stability10.1016/j.ceramint.2022.06.078 ↗
45. Effect of anionic groups on the antibacterial activity of magnesium oxide nanoparticles10.1016/j.colsurfa.2021.127978 ↗
46. Antibacterial characteristics of magnesium oxide powder10.1023/A:1008916209784 ↗