Pulsed laser surface texturing enhancing corrosion resistance of rare-earth WE43 magnesium alloys in simulated body fluid environment
Source abstract
Abstract
The addition of rare earth (RE) elements in Magnesium (Mg) alloys could optimize alloy microstructures and improve the mechanical property. The corrosion resistance however is a tough issue that limits its application as biomedical materials in human bodies. In this work, a green, fast and economical method of pulsed laser surface texturing (PLST) was employed to modify the RE WE43 Mg alloys and the corresponding corrosion resistance after the PLST treatment in simulated body fluid (SBF) was further examined. The microstructural results show that the surface exhibits petal-like microstructures and an oxide film composed of various oxides with remelting particles are also generated on laser-processed areas after PLST treatment. The electrochemical results reveal that the WE43 sample treated by PLST exhibits a superior corrosion resistance in SBF compared with the as-cast one. As for the PLST treated sample with 24 W, the corrosion potential ( E corr) positively shifts from −1.788 V to −1.556 V after being immersed in SBF for 7 days, which is also nobler than that of the as-cast one, −1.915 V. While the corrosion current density ( i corr) drops to the value of 8.3 μA/cm 2, considerably lower than that of the as-cast sample, 1380 μA/cm 2. The enhancement of corrosion resistance in the early stage is mainly due to the protective oxide film induced by PLST. Furthermore, long-term immersion in SBF further accelerates the formation of deposited hydroxyapatite (HA) products layer on petal-like microstructures, which would further contribute to its enhancement in corrosion resistance in the long-term service in human bodies.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (78)
Show source-provided references
1. Corrosion of metallic biomaterials: a review10.3390/ma12030407 ↗
2. Superhydrophobic materials for biomedical applications10.1016/j.biomaterials.2016.06.050 ↗
3. Magnesium matrix composites for biomedical applications: a review10.1016/j.jma.2018.11.001 ↗
4. Recent advances in tribological and wear properties of biomedical metallic materials10.1007/s12598-021-01796-z ↗
5. Effect of heat treatment on some titanium alloys used as biomaterials10.3390/app122111241 ↗
6. Effects of simulated inflammation on the corrosion of 316L stainless steel10.1016/j.msec.2016.10.012 ↗
7. Bioglass and bioactive glasses and their impact on healthcare10.1111/ijag.12252 ↗
8. A review on the enhancement of calcium phosphate cement with biological materials in bone defect healing10.3390/polym13183075 ↗
9. Research progress of biodegradable magnesium-based biomedical materials: a review10.1016/j.jallcom.2022.166377 ↗
10. Biodegradable Mg alloys for orthopedic implants-a review10.1016/j.jma.2021.06.024 ↗
11. Mechanical properties, corrosion resistance and biocompatibilities of degradable Mg-RE alloys: a review10.1016/j.jmrt.2018.08.003 ↗
12. Effect of the addition of low rare earth elements (lanthanum, neodymium, cerium) on the biodegradation and biocompatibility of magnesium10.1016/j.actbio.2014.09.041 ↗
13. Mechanical properties, biodegradability and cytocompatibility of biodegradable Mg-Zn-Zr-Nd/Y alloys10.1016/j.jmst.2020.02.017 ↗
14. Magnesium and micro-elements in older persons10.3390/nu13030847 ↗
15. Mechanical properties of magnesium alloys for medical application: a review10.1016/j.jmbbm.2018.07.022 ↗
16. Ameliorating the mechanical properties of magnesium alloy: role of texture10.1016/j.msea.2017.02.067 ↗
17. Effects of corrosive media on the localized corrosion forms of Mg-3Zn alloy10.1016/j.corcom.2021.08.002 ↗
18. Fundamentals and advances in magnesium alloy corrosion10.1016/j.pmatsci.2017.04.011 ↗
19. Designing advanced biomedical biodegradable Mg alloys: a review10.3390/met12010085 ↗
20. In vitro and in vivo degradation assessment and preventive measures of biodegradable Mg alloys for biomedical applications10.1002/jbm.a.37297 ↗
21. Corrosion products of field-exposed Mg-Al series magnesium alloys10.1016/j.corsci.2016.07.023 ↗
22. Microstructure modification and corrosion resistance enhancement of die-cast Mg-Al-Re alloy by Sr alloying10.1016/j.jma.2020.09.008 ↗
23. The influence of minor Mn additions on creep resistance of die-cast Mg–Al–RE alloys10.1016/j.msea.2016.11.075 ↗
24. Formation of non-dendritic microstructures in preparation of semi-solid Mg-RE alloys slurries: Roles of RE content and cooling rate10.1016/j.jmatprotec.2019.116545 ↗
25. Formation of high-strength β′ precipitates in Mg–RE alloys: The role of the Mg/β″ interfacial instability10.1016/j.actamat.2014.09.024 ↗
26. Reproductive and developmental toxicity of aluminum: A Review10.1016/0892-0362(95)00002-9 ↗
27. Mg and its alloys for biomedical applications: Exploring corrosion and its interplay with mechanical failure
28. Aluminium as a risk factor in alzheimers disease, with emphasis on drinking water10.1016/S0361-9230(01)00459-2 ↗
29. Biomedical rare-earth magnesium alloy: Current status and future prospects10.1016/j.jma.2024.03.014 ↗
30. Mechanical properties, biodegradability and cytocompatibility of biodegradable Mg-Zn-Zr-Nd/Y alloys10.1016/j.jmst.2020.02.017 ↗
31. A probe into the corrosion behavior of a WE43B magnesium alloy in a simulated body fluid using dynamic electrochemical impedance spectroscopy
32. Influence of rare earth element (Y) on microstructure and corrosion behavior of hot extrusion AZ91 magnesium alloy10.3390/ma13163651 ↗
33. Comparative in vitro study on binary Mg-RE (Sc, Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu) alloy systems10.1016/j.actbio.2019.11.013 ↗
34. Effects of Nd/Gd value on the microstructures and mechanical properties of Mg–Gd–Y–Nd–Zr alloys10.1016/j.jma.2016.06.002 ↗
35. Influence of surface condition on the degradation behaviour and biocompatibility of additively manufactured WE43
36. Microstructure, mechanical properties, corrosion resistance and cytocompatibility of WE43 Mg alloy scaffolds fabricated by laser powder bed fusion for biomedical applications
37. Biodegradable magnesium alloy WE43 porous scaffolds fabricated by laser powder bed fusion for orthopedic applications: Process optimization, in vitro and in vivo investigation
38. Improvement of corrosion resistance and biocompatibility of rare-earth WE43 magnesium alloy by neodymium self-ion implantation10.1016/j.corsci.2015.01.049 ↗
39. Improved corrosion resistance of biodegradable WE43 magnesium alloy modified by Sn film deposition10.1016/j.matlet.2022.133588 ↗
40. Effect of electropolishing parameters of WE43 magnesium alloy on corrosion resistance of artificial plasma10.1016/j.jmrt.2023.08.189 ↗
41. Corrosion protection enhancement of Mg alloy WE43 by in-situ synthesis of MgFe LDH/citric acid composite coating intercalated with 8HQ10.1016/j.corsci.2022.110444 ↗
42. Application of sustainable polymers for reinforcing bio-corrosion protection of magnesium implants–a review
43. A review on magnesium alloys for biomedical applications
44. Research progress on surface treatments of biodegradable Mg alloys: a review10.1021/acsomega.9b03423 ↗
45. Development of laser surface technologies for anti-corrosion on magnesium alloy: a review10.1142/S0218625X16300033 ↗
46. Progress of laser surface treatment on magnesium alloy10.3389/fchem.2022.999630 ↗
47. Corrosion resistance of pulsed laser modified AZ31 Mg alloy surfaces10.1016/j.jma.2021.09.020 ↗
48. Improvement of formability and corrosion resistance of AZ31 magnesium alloy by pulsed current-assisted laser shock forming10.1007/s00170-022-09211-2 ↗
49. Understanding the effects of excimer laser treatment on corrosion behavior of biodegradable Mg-1Ca alloy in simulated body fluid10.1016/j.jma.2021.11.011 ↗
50. Rare earth based magnesium alloys-a review on WE series10.3389/fmats.2021.804906 ↗
51. Simulated body fluid and the novel bioactive materials derived from it10.1002/jbm.a.36620 ↗
52. Corrosion behavior of Ag-based alloy in simulated body fluid solution10.1016/j.vacuum.2021.110850 ↗
53. Laser additive manufacturing of biodegradable magnesium alloy WE43: a detailed microstructure analysis10.1016/j.actbio.2019.05.056 ↗
54. A detailed microstructural and corrosion analysis of magnesium alloy WE43 manufactured by selective laser melting
55. Optical properties of MgO thin films grown by laser ablation technique10.1007/s11082-016-0536-8 ↗
56. Advances in degradation behavior of biomedical magnesium alloys: a review10.1016/j.jallcom.2022.164600 ↗
57. Bioinspired surface design for magnesium alloys with corrosion resistance10.3390/met12091404 ↗
58. Corrosion resistance of WE43 Mg alloy in sodium chloride solution10.1016/j.matchemphys.2021.124930 ↗
59. An investigation of the corrosion mechanisms of WE43 Mg alloy in a modified simulated body fluid solution: the influence of immersion time10.1016/j.corsci.2014.07.015 ↗
60. Aging response on the stress corrosion cracking behavior of wrought precipitation-hardened magnesium alloy10.1007/s10853-019-03976-w ↗
61. Characterization and biocompatibility of insoluble corrosion products of AZ91 Mg alloys10.1021/acsomega.9b02041 ↗
62. Toward understanding in vivo corrosion: influence of interfacial hydrogen gas build-up on degradation of magnesium alloy implants10.1002/jbm.a.37446 ↗
63. Corrosion behavior of different coatings prepared on the surface of AZ80 magnesium alloy in simulated body fluid10.1007/s11665-020-04682-4 ↗
64. Corrosion products on biomedical magnesium alloy soaked in simulated body fluids10.1557/jmr.2009.0323 ↗
65. Microgalvanic corrosion mechanism of the rare-earth phase in Mg binary alloys through first-principles calculation
66. Impact of rare-earth elements on the corrosion performance of binary magnesium alloys10.1016/j.jallcom.2020.154569 ↗
67. Corrosion of magnesium alloys containing rare earth elements10.1515/CORRREV.1998.16.1-2.139 ↗
68. An investigation of the corrosion mechanisms of WE43Mg alloy in a modified simulated body fluid solution: the effect of electrolyte renewal10.1016/j.corsci.2014.11.034 ↗
69. Local pH and its evolution near Mg alloy surfaces exposed to simulated body fluids10.1002/admi.201800169 ↗
70. The pilling-bedworth ratio of oxides formed from the precipitated phases in magnesium alloys10.3389/fmats.2021.761052 ↗
71. Influence of pH and chloride ion concentration on the corrosion of Mg alloy ZE4110.1016/j.corsci.2008.08.023 ↗
72. Micromorphological effect of calcium phosphate coating on compatibility of magnesium alloy with osteoblast10.1080/14686996.2016.1266238 ↗
73. Osteoclast and osteoblast responsive carbonate apatite coatings for biodegradable magnesium alloys10.1080/14686996.2020.1761237 ↗
74. Evaluation of toxicity and biocompatibility of a novel Mg-Nd-Gd-Sr alloy in the osteoblastic cell10.1007/s11033-023-08637-5 ↗
75. An investigation of the corrosion mechanisms of WE43 Mg alloy in a modified simulated body fluid solution: the influence of immersion time10.1016/j.corsci.2014.07.015 ↗
76. Initial stages of AZ31B magnesium alloy degradation in ringer’ s solution: interpretation of EIS, mass loss, hydrogen evolution data and scanning electron microscopy observations10.3390/met8110933 ↗
77. Hydroxyapatite coatings on Mg-Ca alloy prepared by pulsed laser deposition: properties and corrosion resistance in simulated body fluid10.1016/j.ceramint.2018.06.095 ↗
78. Effect of rare earth elements (Y, La) on microstructural characterization and corrosion behavior of ternary Mg-Y-La alloys10.3390/ma16145141 ↗