Effect of deep cryogenic treatment on microstructure and mechanical properties of Fe50Mn30Co10Cr10 high entropy alloy fabricated by laser metal deposition
Source abstract
Abstract
As a typical additive manufacturing technology, laser metal deposition (LMD) has been widely used to process high entropy alloy (HEA). However, deposited products usually have poor mechanical properties. In this study, deep cryogenic treatment (DCT) is proposed to enhance the mechanical performance of the laser melting deposited Fe 50Mn 30Co 10Cr 10 high entropy alloy. The tensile strength, hardness and strength-plasticity product of the HEA after 48 h of immersion by DCT processing were 901 MPa, 286HV and 33.3 GPa%, respectively. Compared with the as-deposited state, the HCP ε phase content and tensile strength of the deep cryogenic treated (DCTed) sample increased by 2.2 times and 30.8 %, respectively, while the average grain size decreased by 58.0 %. Furthermore, the friction coefficient and wear rate of the DCTed samples reduced by 25.6 % and 30.3 %, respectively. The high temperature gradient soaking in liquid nitrogen induced dynamic recrystallization, refining the FCC γ grain structures in the HEA. Meanwhile, the samples contained more HCP ε phase due to the transformation-induced plasticity (TRIP) effect triggered by thermal stress. The results indicate that the effects of fine-grain strengthening and second-phase particle dispersion strengthening contribute to the excellent mechanical performance. DCT processing provides a simple and effective way for overcoming the strength-ductility trade-off in the additive manufactured Fe 50Mn 30Co 10Cr 10 HEA.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
4. High-entropy alloys: a critical review10.1080/21663831.2014.912690 ↗
5. High-entropy alloys10.1038/s41578-019-0121-4 ↗
6. Laser deposition of high-entropy alloys: a comprehensive review10.1016/j.optlastec.2021.107447 ↗
7. Fundamental design strategies for advancing the development of high entropy alloys for thermo-mechanical application: a critical review10.1016/j.jmrt.2023.11.008 ↗
8. A novel low-density, high-hardness, high-entropy alloy with close-packed single-phase nanocrystalline structures10.1080/21663831.2014.985855 ↗
9. Corrosion of AlxCoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior10.1016/j.corsci.2017.02.019 ↗
10. Superior high tensile elongation of a single-crystal CoCrFeNiAl0.3 high-entropy alloy by Bridgman solidification10.1016/j.intermet.2014.05.018 ↗
11. Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system10.1016/j.actamat.2013.09.037 ↗
12. Cryogenic treatment to augment wear resistance of tool and die steels10.1016/S0011-2275(01)00065-0 ↗
13. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
14. Microstructure and properties of a refractory high-entropy alloy after cold working10.1016/j.jallcom.2015.07.209 ↗
15. Microstructural and mechanical characterization of an equiatomic YGdTbDyHo high entropy alloy with hexagonal close-packed structure10.1016/j.actamat.2018.06.010 ↗
16. Design Fe-based eutectic medium-entropy alloys Fe2NiCrNbx10.1007/s40195-021-01234-0 ↗
17. A casting eutectic high entropy alloy with superior strength-ductility combination10.1016/j.matlet.2019.06.067 ↗
18. A promising new class of high-temperature alloys: eutectic high-entropy alloys10.1038/srep06200 ↗
19. Direct solidification of bulk ultrafine-microstructure eutectic high-entropy alloys with outstanding thermal stability10.1016/j.scriptamat.2019.02.035 ↗
20. Microstructure and properties of novel CoCrFeNiTax eutectic high-entropy alloys10.1016/j.jallcom.2017.11.075 ↗
21. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
22. A TRIP-assisted dual-phase high-entropy alloy: grain size and phase fraction effects on deformation behavior10.1016/j.actamat.2017.03.069 ↗
23. Effect of the amount of SiC particles on the microstructure, mechanical and wear properties of FeMnCoCr high entropy alloy composites10.1016/j.matchar.2022.112300 ↗
24. Laser surface cladding: the state of the art and challenges10.1243/09544062JMES1782 ↗
25. Additive manufacturing of TRIP-assisted dual-phases Fe50Mn30Co10Cr10 high-entropy alloy: microstructure evolution, mechanical properties and deformation mechanisms10.1016/j.msea.2021.141264 ↗
26. Manufacturing of FeCoCrNi plus FeCoCrNiAl laminated high-entropy alloy by laser melting deposition (LMD)10.1016/j.matlet.2021.129445 ↗
27. Surface modification for AlCoCrFeNi2.1 eutectic high-entropy alloy via laser remelting technology and subsequent aging heat treatment10.1016/j.jallcom.2021.162380 ↗
28. Effect of solid carburization on the surface microstructure and mechanical properties of the equiatomic CoCrFeNi high-entropy alloy10.1016/j.jallcom.2018.07.329 ↗
29. The phase composition characteristics of AlCoCrFeNi high entropy alloy heat-treated by simple normalizing treatment and its effects on mechanical properties10.1016/j.jallcom.2022.166896 ↗
30. Enhancing the wear resistance of case carburized steel (En 353) by cryogenic treatment10.1016/j.cryogenics.2005.10.004 ↗
31. Effect of cryogenic treatment on the matrix structure and abrasion resistance of white cast iron subjected to destabilization treatment10.1016/j.wear.2006.03.021 ↗
32. Electrochemical behavior of Ti-6Al-4V alloy in Hank's solution subjected to deep cryogenic treatment10.1007/s12598-018-1163-2 ↗
33. Effect of deep cryogenic treatment on the properties of 80CrMo12 5 tool steel10.1007/s12613-012-0511-8 ↗
34. Influence of shallow and deep cryogenic treatment on the residual state of stress of 4140 steel10.1016/j.jmatprotec.2010.10.018 ↗
35. Effect of cryogenic treatment on microstructure and mechanical properties of 0Cr12Mn5Ni4Mo3Al steel10.1007/s11665-017-2932-z ↗
36. Fine grains with high-density annealing twins and precipitates inducing favorable strength and excellent plasticity in laser powder b e d fusion-fabricate d Inconel 718 via deep cryogenic and heat treatments10.1016/j.jmst.2023.11.030 ↗
37. Overcoming the strength-ductility trade-off in an additively manufactured CoCrFeMnNi high entropy alloy via deep cryogenic treatment
38. Evidence of FCC to HCP and BCC-martensitic transformations in a CoCrFeNiMn high-entropy alloy by severe plastic deformation10.1016/j.msea.2021.140875 ↗
39. The effect of cryogenic treatment on the microstructure and room-temperature mechanical properties of the (HEAp/Al) at different temperatures
40. Dislocation-induced breakthrough of strength and ductility trade-off in a non-equiatomic high-entropy alloy10.1016/j.actamat.2019.11.055 ↗
41. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
42. Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0.3CoCrFeNi high entropy alloy10.1016/j.matdes.2017.02.072 ↗
43. Thermodynamic instability of a nanocrystalline, single-phase TiZrNbHfTa alloy and its impact on the mechanical properties10.1016/j.actamat.2017.09.035 ↗
44. In-situ alloyed, oxide-dispersion-strengthened CoCrFeMnNi high entropy alloy fabricated via laser powder bed fusion10.1016/j.matdes.2020.108966 ↗
45. High-cycle fatigue and tensile deformation behaviors of coarse-grained equiatomic CoCrFeMnNi high entropy alloy and unexpected hardening behavior during cyclic loading10.1016/j.intermet.2019.106486 ↗
46. A ductile high entropy alloy with attractive magnetic properties10.1016/j.jallcom.2016.09.186 ↗
47. The printability, microstructure, and mechanical properties of Fe80−xMnxCo10Cr10 high-entropy alloys fabricated by laser powder bed fusion additive manufacturing10.3390/mi15010123 ↗
48. SLM Fe50Mn30Co10Cr10 metastable high entropy alloy with Al-Ti addition: synergizing strength and ductility10.1016/j.jallcom.2023.168830 ↗
49. Microstructure and tensile properties of metastable Fe50Mn30Co10Cr10 high-entropy alloy prepared via powder metallurgy10.1016/j.jallcom.2023.170225 ↗
50. Toughening FeMn-based high-entropy alloys via retarding phase transformation10.1016/j.jmst.2020.02.048 ↗
51. Twinning damping interface design and synergistic internal friction behavior in FeMnCrCo high-entropy alloys10.1016/j.msea.2022.144040 ↗
52. Effects of deep cryogenic treatment on the microstructure and mechanical properties of commercial pure zirconium10.1016/j.jallcom.2014.08.201 ↗
53. Regulating strength and ductility of additively manufactured Inconel 718 alloy via adding nano-TiC and deep cryogenic treatment10.1016/j.msea.2024.146852 ↗
54. Effect of deep cryogenic treatment on the microstructure and mechanical properties of Al-Cu-Mg-Ag alloy10.1016/j.jmrt.2023.07.130 ↗
55. Optimization of tensile properties and anisotropy in a cryogenically treated laser additively manufactured high entropy alloy10.1016/j.ijplas.2024.104015 ↗