journal article·2024-11

The mechanical properties and high-temperature oxidation behavior of (TiZr)65-x-yNb15Mo20SixAly refractory high entropy alloys

Qingda Zhang, Baoxian Su, Liang Wang, Chen Liu, Zhe Li, Zhiwen Li, Binbin Wang, Liangshun Luo, Ruirun Chen, Yanqing Su

Publisher page

Abstract

Herein, the mechanical properties and high-temperature oxidation of (TiZr) 65-x-yNb 15Mo 20Si xAl y refractory high-entropy alloys were systematically investigated. Results indicate that alloying with Si improves the strength but reduces the plasticity of the alloy. Maintaining a proper ratio of Al/Si is crucial to achieve the optimal performance of the alloy. The (TiZr) 50.5Nb 15Mo 20Si 9.5Al 5 has excellent high-temperature performance, with a yield strength of 815 MPa at 800°C and a compressive strain greater than 40 %. Moreover, the (TiZr) 50.5Nb 15Mo 20Si 9.5Al 5 exhibits a superior oxidation resistance compared to (TiZr) 55Nb 15Mo 20Si 10 alloy at 1000℃. The introduction of Si enhances the oxidation resistance, decreases the diffusion of the Zr element at 1000 °C and facilitates internal oxidation and the creation of TiNb 2O 7. However, it is important to note that the doping of Al in the higher Si alloys has negative impacts on the oxidation resistance and mechanical properties.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. The hotter the engine, the better10.1126/science.1179327 ↗
2. Prediction of yield strength in a polycrystalline nickel base superalloy during interrupt cooling10.1016/j.scriptamat.2020.03.034 ↗
3. The effect of tensile stress on oxidation behavior of nickel-base single crystal superalloy10.1016/j.corsci.2021.109737 ↗
4. Microstructure and oxidation behavior of new refractory high entropy alloys10.1016/j.jallcom.2013.08.102 ↗
5. Savitskii · 2012
6. The oxidation-resistance mechanism of WTaNbTiAl refractory high entropy alloy10.1016/j.corsci.2022.110377 ↗
7. Refractory high entropy alloys10.1016/j.intermet.2010.05.014 ↗
8. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys10.1016/j.intermet.2011.01.004 ↗
9. Refractory high-entropy alloys: a focused review of preparation methods and properties10.1016/j.jmst.2022.08.046 ↗
10. Effect of Ti additions on mechanical properties of NbMoTaW and VNbMoTaW refractory high entropy alloys10.1016/j.intermet.2017.01.007 ↗
11. Strength-ductility synergy of Al-bearing low-density refractory TiNbMo0.5AlX medium entropy alloys via precipitation10.1016/j.msea.2022.143072 ↗
12. Current status of research on the oxidation behavior of refractory high entropy alloys10.1002/adem.202001047 ↗
13. High-temperature oxidation behavior of refractory high-entropy alloys: effect of alloy composition10.1007/s11085-016-9696-y ↗
14. A combinatorial approach for the synthesis and analysis of AlxCryMozNbTiZr high-entropy alloys: oxidation behavior10.1557/jmr.2018.241 ↗
15. Native oxidation resistance of Al20Nb30Ta10Ti30Zr10 refractory complex concentrated alloy (RCCA)10.1016/j.jallcom.2019.02.128 ↗
16. Oxidation behaviour of a novel refractory high entropy alloy at elevated temperatures10.1016/j.intermet.2020.106711 ↗
17. High temperature oxidation behavior of an equimolar refractory metal-based alloy 20Nb20Mo20Cr20Ti20Al with and without Si addition10.1016/j.jallcom.2016.07.219 ↗
18. Effects of Al/Si on the oxidation behavior of a TiZrV0.5Nb0.5 refractory high entropy alloy at 1000 ℃10.1016/j.corsci.2023.111527 ↗
19. The melting diagram of the Ti-corner of the Ti–Zr–Si system and mechanical properties of As-cast compositions10.1016/j.jallcom.2004.02.060 ↗
20. Effect of Zr and Si addition on high temperature mechanical properties of near-α Ti–Al–Zr–Sn based alloys10.1016/j.msea.2014.06.078 ↗
21. Significantly strengthening the Ti70Nb10Mo10Zr10 alloy via architecting two-scale silicide reinforcements10.1016/j.jallcom.2020.155255 ↗
22. Seynergistic effect of Mo and Zr additions on microstructure and mechanical properties of Nb-Ti-Si-based alloys additively manufactured by laser directed energy deposition10.1016/j.jmst.2021.06.027 ↗
23. Beitrag zur theorie des anlaufvorgangs10.1515/zpch-1933-2105 ↗
24. A crucial review on recent updates of oxidation behavior in high entropy alloys10.1007/s42452-021-04374-1 ↗
25. Effect of Y additions on the oxidation behavior of novel refractory high-entropy alloy NbMoCrTiAl at 1000°C in air10.1007/s11085-020-09983-6 ↗
26. On the oxidation mechanism of niobium-base in situ composite10.1016/j.corsci.2012.03.037 ↗
27. Multiplicity of dislocation pathways in a refractory multiprincipal element alloy10.1126/science.aba3722 ↗
28. The oxidation-resistance mechanism of WTaNbTiAl refractory high entropy alloy10.1016/j.corsci.2022.110377 ↗
29. Current status of research on the oxidation behavior of refractory high entropy alloys10.1002/adem.202001047 ↗
30. Oxidation response of a vacuum arc melted NbZrTiCrAl refractory high entropy alloy at 800–1200 ℃10.1016/j.vacuum.2019.01.026 ↗
31. HSC chemistry 6.0, chemical reaction and equilibrium software with extensive thermochemical database and flowsheet simulation
32. On the oxidation mechanism of refractory high entropy alloys10.1016/j.corsci.2019.108161 ↗
33. Oxidation Behavior of Refractory AlNbTiVZr0.25 High-Entropy Alloy10.3390/ma11122526 ↗
34. Combinatorial synthesis and analysis of AlxTayVzCr20Mo20Nb20Ti20Zr10 and Al10CrMoxNbTiZr10 refractory high-entropy alloys: oxidation behavior10.1016/j.jallcom.2020.154427 ↗
35. Role of Cr in the high-temperature oxidation behavior of CrxMnFeNi high-entropy alloys at 800 ◦C in air10.1016/j.corsci.2022.110211 ↗
36. Microstructural stability and aging behavior of refractory high entropy alloys at intermediate temperatures10.1016/j.jmst.2021.12.057 ↗
37. Zr diffusion in BCC refractory high entropy alloys: a case of ‘non-sluggish’ diffusion behavior10.1016/j.actamat.2022.117970 ↗
38. Self-diffusion and impurity diffusion in group IV metals10.1016/S1470-1804(08)00004-7 ↗
39. A first-principles study of the diffusion coefficients of alloying elements in dilute alpha-Ti alloys10.1039/C6CP01899H ↗
40. Effects of Al/Si on the oxidation behavior of a TiZrV0.5Nb0.5 refractory high entropy alloy at 1000 ℃10.1016/j.corsci.2023.111527 ↗
41. Oxidation behaviour of eutectic refractory high-entropy alloys at 800–1000 ℃10.1016/j.corsci.2022.110464 ↗
42. Oxidation behavior of a refractory NbCrMo0.5Ta0.5TiZr alloy10.1007/s10853-012-6582-0 ↗
43. Microstructure, mechanical properties and oxidation resistance of Nb-22Ti-14Si-2Hf-2Al-xCr alloys10.1016/S1000-9361(11)60390-7 ↗
44. N. Pilling, R. Bedworth, The oxidation of metals at high temperatures. 1923.
45. Oxidation behaviour of zirconium alloys and their precipitates – a mechanistic study10.1016/j.jnucmat.2012.06.026 ↗
46. Composite alloying effects of V and Zr on the microstructures and properties of multi-elemental Nb–Si based ultrahigh temperature alloys10.1016/j.msea.2021.141175 ↗
47. Low-density, refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system: microstructure and phase analysis10.1016/j.actamat.2012.11.032 ↗
48. Microstructure and properties of a refractory NbCrMo0.5Ta0.5TiZr alloy10.1016/j.msea.2011.09.033 ↗
49. Structure and mechanical properties of the AlCrxNbTiV (x= 0, 0.5, 1, 1.5) high entropy alloys10.1016/j.jallcom.2015.08.224 ↗
50. Effects of Al and Mo on high temperature oxidation behavior of refractory high entropy alloys10.1016/S1003-6326(19)65054-5 ↗
51. Effects of Al/Si on the oxidation behavior of a TiZrV0.5Nb0.5 refractory high entropy alloy at 1000℃10.1016/j.corsci.2023.111527 ↗
52. Influence of micro arc oxidation on high temperature oxidation resistance of AlTiCrVZr refractory high entropy alloy10.1016/j.ijrmhm.2021.105562 ↗