Effect of Ca and Y microalloying on oxidation behavior of AZ31 at high temperature
Source abstract
Abstract
The microstructure, oxidation behaviour and oxide film morphology of AZ31, AZ31–0.5Ca, AZ31–0.5Y and AZ31–0.5Ca-0.5Y alloys were investigated. The results demonstrate that the oxidation behaviour of all the experimental alloys can be divided into two distinct parts: the incubation zone, which follows a parabolic law, and the non-protective oxidation zone. The resistance to high-temperature oxidation of AZ31 was enhanced by the incorporation of Ca or Y. The outcomes demonstrated that the oxidation behaviour of AZ31 was highly commendable. The observation of the micro-morphology by scanning electron microscopy (SEM) revealed that the presence of calcium (Ca) and yttrium (Y) can reduce the amount and change the shape of the low-melting-point phase of magnesium (Mg) and aluminium (Al) (Mg 17Al 12 ). The morphology and composition of the oxide films were analysed, and it was found that the AZ31–0.5Ca and AZ31–0.5Ca-0.5Y oxides are thinner and more dense, and that the failure is in the form of peeling and detachment. Furthermore, it was observed that the oxides of AZ31 and AZ31–0.5Y become loose and porous at high temperatures. The antioxidant capacity of calcium is enhanced by increasing the film density, while yttrium enhances the resistance to high-temperature oxidation by depleting the low-melting phase and changing the nature of α-Mg. The simultaneous addition of Ca and Y results in cracking and peeling of the film layer.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Review on forming process of magnesium alloy characteristic forgings10.1016/j.jallcom.2023.172666 ↗
2. Facile fabrication and biological properties of super-hydrophobic coating on magnesium alloy used as potential implant materials10.1016/j.surfcoat.2019.125223 ↗
3. Applications of magnesium alloys for aerospace: a review10.1016/j.jma.2023.09.015 ↗
4. Novel magnesium alloy containing Y, Gd and Ca with enhanced ignition temperature and mechanical properties for aviation applications10.1016/j.jallcom.2021.160089 ↗
5. Simulation research on the rotating back extrusion process for magnesium alloy wheel10.1007/s12289-023-01793-w ↗
6. Ignition-resistant Mg-2Y-2Gd-1Ca alloy for aviation applications10.1016/j.jallcom.2023.169683 ↗
7. Improving flame resistance and mechanical properties of magnesium–silver–calcium sheet alloys by optimization of calcium content10.1016/j.jallcom.2020.155551 ↗
8. Construction and properties of a multifunctional stearic acid modified CeO2 coating on anodized AZ31B Mg alloy10.1016/j.jallcom.2023.169316 ↗
9. Corrosion resistance study of ZIF-67/Co-Fe LDHs composite coating on the surface of AZ31 magnesium alloy micro-arc oxidation film10.1016/j.jallcom.2024.174278 ↗
10. One-step preparation of color-tuned surface coatings on magnesium alloy with corrosion resistance10.1016/j.jallcom.2023.173300 ↗
11. Anionic assisted incorporation of WO3 nanoparticles for enhanced electrochemical properties of AZ31 Mg alloy coated via plasma electrolytic oxidation10.1016/j.jallcom.2022.165445 ↗
12. Recent understanding of the oxidation and burning of magnesium alloys10.1680/jsuin.18.00062 ↗
13. Oxidation of magnesium alloys at elevated temperatures in air: a review10.1016/j.corsci.2016.06.018 ↗
14. The reactive element effect on high-temperature oxidation of magnesium10.1179/1743280415Y.0000000001 ↗
15. Classification of high-temperature oxidation behavior of Mg-1 at% X binary alloys and application of proposed taxonomy to nonflammable multicomponent Mg alloys10.1016/j.corsci.2020.108858 ↗
16. Effect of Ca on Oxidation Resistance of Magnesium Alloys (AZ91)
17. The effect of calcium addition to magnesium on the microstructure and compositional changes of oxide film formed at high temperature10.2320/matertrans.42.1139 ↗
18. Effect of CaO composition on oxidation and burning behaviors of AM50 Mg alloy10.1016/S1003-6326(11)61054-6 ↗
19. Effect of CaO and hot extrusion on the oxidation of AZ61 magnesium alloys10.1007/s11085-015-9579-7 ↗
20. Effect of heat treatment on oxidation resistance of magnesium alloys with additions of calcium oxide10.1016/j.corsci.2022.110558 ↗
21. High temperature oxidation of AZ31+0.3wt%Ca and AZ31+0.3wt%CaO magnesium alloys10.1016/j.corsci.2013.01.036 ↗
22. The oxidation behavior and reaction thermodynamics and kinetics of the Mg-X (X = Ca/Gd/Y) binary alloys10.1016/j.corsci.2023.111609 ↗
23. High-temperature oxidation of Mg–Ca alloy: experimentation and density functional theory
24. Effect of REs (Y, Nd) addition on high temperature oxidation kinetics, oxide layer characteristic and activation energy of AZ80 alloy10.1016/j.jma.2019.09.013 ↗
25. Lanthanides: the key to durable and sustainable corrosion protection10.1021/acssuschemeng.3c00763 ↗
26. Oxidation resistance of Mg-Y alloys at elevated temperatures and the protection performance of the oxide films10.1016/j.jallcom.2018.03.342 ↗
27. Enhanced oxidation resistance in Mg-Y-Zn-Ho alloys via introducing dense low-oxygen-diffusion Ho2O3 oxide film10.1016/j.corsci.2023.110976 ↗
28. Effect of Y on high-temperature oxidation behavior and products of AZ80 alloy10.1016/j.matchemphys.2021.124732 ↗
29. Effect of indium and yttrium on the corrosion behavior of AZ63 magnesium alloy10.1016/j.jallcom.2024.174068 ↗
30. The oxidation behavior of Mg-Er binary alloys at 500 ℃10.1016/j.corsci.2021.109961 ↗
31. High-temperature oxidation behavior and corrosion behavior of high strength Mg-xGd alloys with high Gd content10.1016/j.corsci.2021.109872 ↗
32. Effect of Ce addition on the high-temperature oxidation resistance of Mg–Gd alloys10.1002/maco.202113005 ↗
33. Effect of Er addition on the oxidation behavior of Mg-4Al-0.2Mn alloy at high temperatures
34. The ignition behavior of a ternary Mg–Sr–Ca alloy10.1002/adem.201901318 ↗
35. Generalisation of the oxide reinforcement model for the high oxidation resistance of some Mg alloys micro-alloyed with Be10.1016/j.corsci.2018.12.001 ↗
36. Understanding the high temperature oxidation and ignition behaviour of two-phase Mg–Nd alloys and a comparison to single phase Mg–Nd10.1080/14786435.2014.998735 ↗
37. On the role of nano-alumina particulate reinforcements in enhancing the oxidation resistance of magnesium alloy AZ31B10.1016/j.msea.2008.09.050 ↗
38. High temperature mechanical behavior of AZ61 magnesium alloy reinforced with graphene nanoplatelets10.1016/j.matdes.2015.10.101 ↗
39. The early stage oxidation and evaporation of Mg–9%Al–1%Zn alloy10.1016/S0010-938X(03)00151-3 ↗
40. An XPS study of native oxide and isothermal oxidation kinetics at 300 °C of AZ31 twin roll cast magnesium alloy10.1007/s11085-013-9466-z ↗
41. The ignition behavior of a ternary Mg–Sr–Ca alloy10.1002/adem.201901318 ↗
42. In vitro corrosion of as-extruded Mg–Ca alloys—the influence of Ca concentration10.1016/j.corsci.2015.03.018 ↗
43. Early oxidation behaviors of Mg–Y alloys at high temperatures10.1016/j.jallcom.2007.06.065 ↗
44. Initial oxide-film growth on Mg-based MgAl alloys at room temperature10.1016/j.actamat.2008.05.020 ↗
45. The effect of the existing state of Y on high temperature oxidation properties of magnesium alloys10.1016/j.apsusc.2016.02.156 ↗
46. In vitro degradation and electrochemical corrosion evaluations of microarc oxidized pure Mg, Mg–Ca and Mg–Ca–Zn alloys for biomedical applications10.1016/j.msec.2014.11.048 ↗