Fabrication of a novel high electrical conductivity Si3N4 matrix composite with Cu three-dimensional network structure by spark plasma sintering
Source abstract
Abstract
Silicon nitride (Si 3 N 4 ) ceramic matrix conductive composite materials have shown great promise as conductive layer materials for electrical transmission components. However, existing conductive phases struggle to form a three-dimensional (3D) interconnected network in Si 3 N 4 matrix, resulting in poor electrical conductivity . This study proposed a spark plasma sintering (SPS) process utilizing Si 3 N 4 as the substrate and Cu particles as the reinforcement phase to fabricate a novel electrical conductivity Si 3 N 4 /Cu composite material. The results indicated that the diffusion of Si atoms in Si 3 N 4 facilitated the formation of copper silicide (Cu i Si) interface between the two constituents during sintering, creating a strong chemical bonding for high conductivity. Simultaneously, composite materials with optimized Cu content formed a 3D interconnect network structure, providing a continuous path for electrical conduction. At Cu content of 30 vol%, the Si 3 N 4 /Cu composite exhibited a satisfying electrical conductivity of 295.37 S/m, which was 14 orders of magnitude higher than that of Si 3 N 4 . The composites also demonstrated a percolation phenomenon, with a theoretical percolation threshold of Cu particles at just 0.1 vol%, an order of magnitude lower than that of carbon reinforcement particles . Furthermore, an integrated design featuring external insulation and internal conductivity was achieved by wrapping a Si 3 N 4 insulation layer around the conductive Si 3 N 4 /Cu composites. The fabricated insulation layer exhibited higher resistivity (1.12×10 14 Ω) and a lower wear rate (1.3×10 −6 mm 3 /N·m) compared to some contemporary insulation ceramics, while the conductive layer had a lower calorific value , making them excellent candidates for electrical transmission component materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Additive Manufacturing and 3D Printing Technologies · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Review of the performance of high-voltage composite insulators10.3390/polym14030431 ↗
2. Fabrication of Al-CNT composite with high hardness and electrical conductivity by controlling Al4C3 formation10.1016/j.jallcom.2023.169102 ↗
3. Achieving high strength and high conductivity synergy through hierarchical precipitation stimulated structural heterogeneities in a Cu-Ag-Zr alloy10.1016/j.matdes.2022.110777 ↗
4. Large-area, highly thermally conductive, but electrically insulative industrial aramid papers with hierarchical multiscale compositing structures10.1016/j.compositesa.2023.107634 ↗
5. Review on nitride compounds and its polymer composites: a multifunctional material10.1016/j.jmrt.2022.03.032 ↗
6. Fabrication and characterization of highly thermal conductive Si3N4/diamond composite materials10.1016/j.matdes.2022.111482 ↗
7. Materials for thermal conduction10.1016/S1359-4311(01)00042-4 ↗
8. Electrical discharge machining of oxide and nitride ceramics: a review10.1016/j.matdes.2021.109965 ↗
9. Influence of graphene and graphene oxide on properties of spark plasma sintered Si3N4 ceramic matrix
10. Fabrication of electrically conductive barium aluminum silicate/silicon nitride composites with enhanced strength and toughness10.1007/s10853-020-05409-5 ↗
11. Effects of the electric current on conductive Si3N4/TiN composites in spark plasma sintering10.1016/j.jallcom.2012.08.091 ↗
12. Sonochemically exfoliated polymer-carbon nanotube interface for high performance supercapacitors10.1016/j.jcis.2021.08.136 ↗
13. Specific surface area of carbon nanotubes and bundles of carbon nanotubes10.1016/S0008-6223(00)00155-X ↗
14. Mechanical properties and tribology of Si3N4–TiB2 ceramic composites produced by hot pressing and hot isostatic pressing10.1016/S0955-2219(00)00294-6 ↗
15. Simultaneously enhanced electrical conductivity and strength in Cu/graphene/Cu sandwiched nanofilm10.1016/j.scriptamat.2020.06.051 ↗
16. Core-shell Cu@Al2O3 fillers for enhancing thermal conductivity and retaining electrical insulation of epoxy composites10.1016/j.jallcom.2022.167123 ↗
17. Processing and microstructure of Ti-Cu binary alloys: a comprehensive review10.1016/j.pmatsci.2022.100933 ↗
18. Silicon nitride-silicon carbide micro/nanocomposites: a review10.1111/ijac.13903 ↗
19. Effect of annealing temperature on electrical and thermal property of cold-rolled multi-walled carbon nanotubes reinforced copper composites10.1016/j.diamond.2020.107980 ↗
20. Experimental study of ZrB2-Si3N4 on the microstructure, mechanical and electrical properties of high grade AA8011 metal matrix composites10.1016/j.jallcom.2019.03.112 ↗
21. Influence of processing techniques on mechanical and electrical performance of PLA-graphene composite feedstock filaments10.1016/j.jmapro.2023.11.021 ↗
22. Negative permittivity behavior in carbon fibre/silicon nitride ceramic composites prepared by spark plasma sintering10.1016/j.ceramint.2021.09.063 ↗
23. Fabrication of a novel magnetic high entropy alloy with desirable mechanical properties by mechanical alloying and spark plasma sintering10.1016/j.jmapro.2022.10.048 ↗
24. A novel nano Cu/Ti–Si3N4 ceramic substrates fabricated by spark plasma sintering and its bonding mechanism10.1016/j.vacuum.2021.110093 ↗
25. Nanosecond laser-induced surface modification to strengthen Cu/Si3N4 AMB joints10.1016/j.msea.2022.143573 ↗
26. Unravelling the optimization of few-layer graphene crystallinity and electrical conductivity in ceramic composites by Raman spectroscopy10.1016/j.jeurceramsoc.2021.09.025 ↗
27. Synergistically enhancing the electrical conductivity of carbon fibre reinforced polymers by vertical graphene and silver nanowires10.1016/j.compositesa.2023.107463 ↗
28. Fabrication of Si3N4/Cu direct-bonded heterogeneous interface assisted by laser irradiation10.1016/j.jmst.2021.05.032 ↗
29. High thermal conductivity non-oxide ceramics10.2109/jcersj.109.S7 ↗
30. Electromagnetic interference shielding properties of polymer derived SiC-Si3N4 composite ceramics10.1016/j.jmst.2019.07.006 ↗
31. Fabrication and properties of symmetrical W/Si3N4/W functionally graded materials by spark plasma sintering10.1016/j.jallcom.2021.163077 ↗
32. Interfacial microstructure and its effect on thermal conductivity of SiCp/Cu composites10.1016/j.matdes.2014.05.068 ↗
33. Microstructure and thermo-mechanical properties of pressureless infiltrated SiCp/Cu composites10.1016/j.compscitech.2008.05.018 ↗
34. Graphene nanoplatelet/silicon nitride composites with high electrical conductivity10.1016/j.carbon.2012.03.031 ↗
35. High-speed deposition of silicon nitride thick films via halide laser chemical vapor deposition10.1016/j.jeurceramsoc.2023.04.035 ↗
36. Physics of inhomogeneous inorganic materials10.1016/0079-6425(93)90004-5 ↗
37. Percolation and conduction10.1103/RevModPhys.45.574 ↗
38. Experimental and computational conductivity study of multilayer graphene in polypropylene nanocomposites10.1039/C8TC01135D ↗
39. High conductivity, percolation behavior and dielectric relaxation of hybrid ZIF-8/CNT composites10.1016/j.jallcom.2020.154132 ↗
40. Electrical transport and joule heating of ZrB2 network in SiC matrix10.4191/kcers.2018.55.5.08 ↗
41. Percolation, statistical topography, and transport in random media10.1103/RevModPhys.64.961 ↗
42. Introduction to percolation theory10.1063/1.2820231 ↗
43. Fabrication of core-shell structured Ni@BaTiO3 scaffolds for polymer composites with ultrahigh dielectric constant and low loss10.1016/j.compositesa.2019.105521 ↗
44. Metallic ferromagnetic selenospinel composites of CuCr2Se4-CdCr2Se4 with double negative electromagnetic parameters10.1063/5.0049612 ↗
45. Comparison of electrical properties between multi-walled carbon nanotube and graphene nanosheet/high density polyethylene composites with a segregated network structure10.1016/j.carbon.2010.11.013 ↗
46. Mechanical properties and electrical conductivity in a carbon nanotube reinforced silicon nitride composite10.1016/j.ceramint.2011.07.038 ↗
47. Microstructure and properties of thermal electrode material Si3N4-MoSi2 composite ceramics10.3390/ma11060986 ↗
48. Improving the electrical and microwave absorbing properties of Si3N4 ceramics with carbon nanotube fibers10.1016/j.ceramint.2017.10.233 ↗
49. Potential-current characteristics in SiC/ZrB2 composite ceramics10.1016/j.jeurceramsoc.2018.01.020 ↗
50. Mechanical, thermal and electrical properties of nanostructured CNTs/SiC composites10.1016/j.ceramint.2018.10.187 ↗
51. Architectural design and cryogenic synthesis of Si3N4@(TiN-Si3N4) for high conductivity10.1111/jace.15165 ↗
52. Multi-scale electrical response of silicon nitride/multi-walled carbon nanotubes composites10.1016/j.compscitech.2010.10.004 ↗
53. Effect of sintering on physical, mechanical, and electrical properties of alumina-based porcelain insulator using economic raw materials doped with zirconia10.1007/s41779-019-00311-z ↗
54. Numerical analysis and experimental study of the laser cleaning of ceramic insulator contamination10.1109/ACCESS.2022.3173309 ↗