AlNbTiVZr refractory high entropy alloy combining exceptional high-temperature performance and excellent ductility fabricated by laser direct energy deposition
Source abstract
Abstract
In this study, a new refractory high entropy alloy (RHEA) AlNbTiVZr is fabricated by laser direct energy deposition (LDED), and an investigation is conducted to explore the hot deformation. The body-centered cubic (BCC) phase structure and a small number of close-packed hexagonal Laves intermetallic phases of RHEA are predicted by combining XRD with the calculation of empirical parameters. Compression tests are carried out at different temperatures, and the results show that no fracture occurs when the strain reaches 50% at any of the temperatures tested while exhibiting a high yield stress. The dynamic softening effect is enhanced as the temperature increases and the yield stress decreases significantly. A slight hardening trend is observed during the steady-state flow stage of the stress-strain curve. The softening of RHEA is mainly caused by dynamic reversion (DRV) and assisted dynamic recrystallization (DRX), where the atomic mobility at the grain boundaries increases with temperature, promoting the creation of recrystallized grains.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Mechanical performance of the Al x CoCrCuFeNi high-entropy alloy system with multiprincipal elements
2. On the enhanced wear resistance of CoCrFeMnNi high entropy alloy at intermediate temperature10.1016/j.scriptamat.2020.05.053 ↗
3. Microstructure and property of AlTiCrFeNiCu high-entropy alloy10.1016/j.jallcom.2011.02.108 ↗
4. In-situ synthesis of a FeCoCrNiCu/FeCoCrNiAl composite high entropy alloy coating by laser cladding10.1016/j.surfcoat.2023.129447 ↗
5. Effect of Y2O3 on the microstructure and tribology property of WMoTaNb refractory high entropy alloy coating prepared by laser cladding
6. Microstructure and properties of Al0.5NbTi3VxZr2 refractory high entropy alloys combined with high strength and ductility
7. Hot deformation behaviors of an ultrafine-grained MoNbTaTiV refractory high-entropy alloy fabricated by powder metallurgy
8. Microstructure and mechanical properties of CxHf0.25NbTaW0.5 refractory high-entropy alloys at room and high temperatures
9. A ductile Nb40Ti25Al15V10Ta5Hf3W2 refractory high entropy alloy with high specific strength for high-temperature applications
10. Alloy design for intrinsically ductile refractory high-entropy alloys10.1063/1.4966659 ↗
11. Design and development of low density, high strength ZrNbAlVTi high entropy alloy for high temperature applications10.1016/j.ijrmhm.2023.106222 ↗
12. High-temperature deformation behavior and processing maps of a novel AlNbTi 3VZr 1.5 refractory high entropy alloy
13. Microstructural characterisation and mechanical evaluation of Ti-15Mo manufactured by laser metal deposition10.1016/j.jallcom.2023.169553 ↗
14. Effect of multiple thermal cycles on the microstructure evolution of GA151K alloy fabricated by laser-directed energy deposition
15. Thermal analysis and microstructure evolution of TiC/Ti6Al4V functionally graded material by direct energy deposition
16. Multi-regional microstructure control using ultrasonic-assisted directed energy deposition for Al-Cu alloy10.1016/j.jmatprotec.2023.118269 ↗
17. Mechanism of columnar to equiaxed to lamellar grain transition during wire-laser directed energy deposition 205C aluminum alloy utilizing a coaxial head: numerical simulation and experiment10.1016/j.jmatprotec.2023.118208 ↗
18. Development and directed energy deposition of high strength Hf5Mo15Nb35Ta25Ti20 refractory high entropy alloys10.1016/j.matchar.2024.113679 ↗
19. Microstructure and mechanical properties of a refractory AlMo0.5NbTa0.5TiZr high-entropy alloy manufactured by laser-directed energy deposition10.1016/j.matlet.2022.133748 ↗
20. Additive manufacturing of ductile refractory high-entropy alloys via phase engineering10.1016/j.actamat.2023.118781 ↗
21. High specific yield strength and superior ductility of a lightweight refractory high-entropy alloy prepared by laser additive manufacturing
22. Defining the tensile properties of Al-12Si parts produced by selective laser melting10.1016/j.actamat.2016.12.044 ↗
23. On the optimal process window for powder-based laser-directed energy deposition of AA7050 under different robot programs and scanning strategies
24. Microstructures and properties of high-entropy alloys
25. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
26. Structure and mechanical properties of novel lightweight refractory high entropy alloys NbMoTiZr-(Al/V): a combined first principles and experimental study
27. Concurrently achieving strength-ductility combination and robust anti-wear performance in an in-situ high-entropy bulk metallic glass composite10.1016/j.compositesb.2024.111222 ↗
28. Phase evolution of the AlxNbTiVZr (x = 0; 0.5; 1; 1.5) high entropy alloys
29. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
30. Phase stability in high entropy alloys: formation of solid-solution phase or amorphous phase10.1016/S1002-0071(12)60080-X ↗
31. The effects of secondary elemental Mo or Ti addition in Al 0.3CoCrFeNi high-entropy alloy on age hardening at 700 °C
32. Microstructure and mechanical properties of AlNbTiVZr system refractory high entropy alloys10.1016/j.jallcom.2022.166767 ↗
33. Effects of Al/Si on the oxidation behavior of a TiZrV0.5Nb0.5 refractory high entropy alloy at 1000 ℃10.1016/j.corsci.2023.111527 ↗
34. Structure and mechanical properties of a light-weight AlNbTiV high entropy alloy10.1016/j.matlet.2014.11.162 ↗
35. A novel light-weight refractory high-entropy alloy with high specific strength and intrinsic deformability
36. Microstructure and mechanical properties of Ti3V2NbAlxNiy low-density refractory multielement alloys
37. Structure and mechanical properties of B2 ordered refractory AlNbTiVZr x (x = 0–1.5) high-entropy alloys10.1016/j.msea.2017.08.019 ↗
38. Mechanical properties of low-density, refractory multi-principal element alloys of the Cr–Nb–Ti–V–Zr system10.1016/j.msea.2012.12.018 ↗
39. Structure and mechanical properties of the AlCrxNbTiV (x=0, 0.5, 1, 1.5) high entropy alloys
40. Precipitation-strengthened refractory Al0.5CrNbTi2V0.5 high entropy alloy - ScienceDirect
41. Structure and mechanical properties of near-eutectic refractory Al-Cr-Nb-Ti-Zr high entropy alloys10.1088/1757-899X/1014/1/012058 ↗
42. Composition control and heat treatment effect on characteristics of ZrNbTaHfx refractory high entropy alloys10.1016/j.ijrmhm.2024.106597 ↗
43. Effect of Ti content on microstructure and properties of TixZrVNb refractory high-entropy alloys10.1007/s12613-020-2040-1 ↗
44. Hot deformation induced microstructural evolution in local-heterogeneous wire + arc additive manufactured 2219 Al alloy
45. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys10.1016/j.intermet.2011.01.004 ↗
46. A superb mechanical behavior of newly developed lightweight and ductile Al0.5Ti2Nb1Zr1Wx refractory high entropy alloy via nano-precipitates and dislocations induced-deformation10.1016/j.matdes.2022.111034 ↗
47. Microstructure and micro-texture evolution during large strain deformation of an aluminium–copper–lithium alloy AA
48. A new grain orientation spread approach to analyze the dynamic recrystallization behavior of a cast-homogenized Mg-Zn-Zr alloy using electron backscattered diffraction10.1016/j.msea.2017.10.062 ↗
49. Dynamic recrystallization and hot processing map of Ti-48Al-2Cr-2Nb alloy during the hot deformation10.1016/j.matchar.2021.111332 ↗
50. Molecular dynamics study on the grain size, temperature, and stress dependence of creep behavior in nanocrystalline nickel10.1007/s10853-016-0506-3 ↗
51. Molecular dynamic study on the deformation mechanism based on strain rate, solute atomic concentration and temperature in dual-phase equiaxial nanocrystalline AgCu alloy10.1016/j.jallcom.2019.04.304 ↗
52. Microstructural evolution and mechanical properties of AlxCoCrFeNi high-entropy alloys under uniaxial tension: a molecular dynamics simulations study10.1016/j.mtcomm.2021.102525 ↗
53. Plastic deformation behavior and dynamic recrystallization of Inconel 625 superalloy fabricated by directed energy deposition
54. The identification of dynamic recrystallization and constitutive modeling during hot deformation of Ti55511 titanium alloy10.1016/j.matdes.2015.06.093 ↗
55. Unique high-temperature deformation dominated by grain boundary sliding in heterogeneous necklace structure formed by dynamic recrystallization in HfNbTaTiZr BCC refractory high entropy alloy
56. Dynamic recrystallization mechanism and improved mechanical properties of a near α high temperature titanium alloy processed by severe plastic deformation10.1016/j.matchar.2020.110281 ↗
57. Dynamic recrystallization of a new nickel-based alloy for 700°C A-USC power plant applications with different initial states: as-homogenized and as-forged
58. Hot deformation behavior and dynamic recrystallization mechanism of Ti2ZrTa0.75 refractory complex concentrated alloy
59. Effect of deformation temperature on microstructure evolution in aluminum alloy 2219 during hot ECAP10.1016/j.msea.2007.09.070 ↗
60. Dynamic recrystallization of ferrite in interstitial free steel10.1016/S1359-6462(97)00123-1 ↗
61. Deformation and boundary motion analysis of a faceted twin grain boundary10.1016/j.ijmecsci.2024.109044 ↗
62. Microstructure and properties of aluminum-containing refractory high-entropy alloys10.1007/s11837-014-1066-0 ↗
63. Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy10.1007/s10853-012-6260-2 ↗
64. Hot deformation behavior and microstructure evolution of non-equimolar Ti2ZrHfV0.5Ta0.2 refractory high-entropy alloy10.1016/j.intermet.2022.107586 ↗
65. Sluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys10.1016/j.actamat.2013.04.058 ↗
66. Microstructure and elevated temperature properties of a refractory TaNbHfZrTi alloy10.1007/s10853-012-6260-2 ↗
67. Microstructure and properties of aluminum-containing refractory high-entropy alloys10.1007/s11837-014-1066-0 ↗
68. Unique deformation behavior and microstructure evolution in high temperature processing of HfNbTaTiZr refractory high entropy alloy10.1016/j.actamat.2019.04.018 ↗
69. Hot deformation behavior of Ni61Fe10Cr10Al17Mo2 high-entropy alloy with hierarchical structure
70. A review of hot deformation behavior and constitutive models to predict flow stress of high-entropy alloys10.1016/j.jallcom.2022.163964 ↗