journal article·2024-08Open access

A synergetic effect of ternary refractory nitride reinforcements on densification, mechanical, tribological and thermal stability characteristics of spark plasma sintering-developed Ti6Al4V matrix composites

John Olorunfemi Abe, Olawale Muhammed Popoola, Patricia Abimbola Popoola

Abstract

This paper reports the possibility of developing advanced Ti6Al4V matrix composites (TMCs) with enhanced mechanical properties and highly improved resistance to wear and thermal degradation for structural and high-temperature aerospace applications. The synergetic effect of different weight compositions (1, 1.5 and 2 wt. %) of ternary reinforcements consisting of h-BN, TiN and AlN nanoparticles on the characteristics of the microstructure, phase constitution, densification, mechanical, tribological and thermal stability of Ti6Al4V matrix composites developed by spark plasma sintering (SPS) is investigated. The unreinforced Ti6Al4V exhibited a two-phase microstructure made up of α/β phases, however the simultaneous reinforcements resulted in notable microstructural changes and emergence of nitride-rich secondary phases. The relative densities of the composites decrease with increasing reinforcement addition, whereas the nanohardness and elastic modulus values of the composites continue to improve with increasing reinforcement from 1 wt. % (28.319 ± 0.525 GPa and 219.43 ± 6.77 GPa) to 2 wt. % (55.642 ± 0.693 GPa and 314.59 ± 7.58 GPa) compared to the unreinforced Ti6Al4V (5.838 ± 0.323 GPa and 115.07 ± 3.63 GPa). The unreinforced alloy yields higher average COF values, while the composites at equivalent applied normal loads yield lower average COF values. Thus, in comparison to the unreinforced alloy, the produced composites exhibit considerably lower specific wear rates (with increasing applied normal load). Based on thermogravimetric analysis, the oxidized composite reinforced with 1 wt. % of ternary reinforcements exhibits the highest thermal stability in the high-temperature oxidizing environment, as evidenced by its greatest resistance to oxidation and its smallest weight gain of 1.55%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. A study on microstructure of aluminium matrix composites10.1016/j.jascer.2015.04.001 ↗
2. Elsevier
3. Multifunctional material systems: a state-of-the-art review10.1016/j.compstruct.2016.01.028 ↗
4. Multifunctional materials: concepts, function-structure relationships, knowledge-based design, translational materials research10.1088/2399-7532/aada7b ↗
5. Mechanical design and performance of composite multifunctional materials10.1016/j.actamat.2004.01.007 ↗
6. Multifunctional materials: engineering applications and processing challenges10.1007/s00170-009-2428-6 ↗
7. use of titanium and its alloy in aerospace and aircraft industries
8. Jawaid · 2018
9. Leyens · 2003
10. Mitigation of abrasive wear damage of ti6al4v by laser surface alloying10.1016/j.matdes.2015.02.010 ↗
11. Nanoindentation studies of the mechanical behaviours of spark plasma sintered multiwall carbon nanotubes reinforced Ti6Al4V nanocomposites10.1016/j.msea.2019.138320 ↗
12. Wear and corrosion properties of spark plasma sintered Ti6Al4V–Al2O3 composites
13. Microstructural evolution and mechanical properties of graphene oxide-reinforced Ti6Al4V matrix composite fabricated using spark plasma sintering10.3390/nano11061440 ↗
14. H. Guleryuz, H. Cimenoglu, Oxidation of Ti6Al4V alloy, J. Alloys Comp., 472(1-2):241-246, 〈https://www.sciencedirect.com/science/article/pii/S0925838808006609〉.10.1016/j.jallcom.2008.04.024 ↗
15. Oxidation behavior and microstructural decomposition of Ti6Al4V and Ti6Al4V–1B sheet10.1016/j.corsci.2016.07.032 ↗
16. Nanoindentation study of mechanical properties of Ti based alloys with Fe and Ta additions10.1016/j.jallcom.2016.09.123 ↗
17. An overview on mechanical properties of particulate reinforced Ti6Al4V metal matrix composites
18. Tribology of metal matrix composites
19. Consolidation of Ti6Al4V alloy and refractory nitride nanoparticles by spark plasma sintering method: microstructure, mechanical, corrosion and oxidation characteristics10.1016/j.msea.2020.138920 ↗
20. Pierson · 1996
21. Friction and wear behavior of titanium matrix (TiB+ TiC) composites10.1016/j.wear.2010.12.072 ↗
22. Production of Al2024/h-BN nanocomposites with improved corrosion, wear and mechanical properties10.1016/j.matchemphys.2023.127566 ↗
23. Fabrication and microstructural characterization of nanoparticle TiN reinforced Al-Mg-Si matrix composite10.1016/j.matpr.2019.07.197 ↗
24. Synthesis of magnesium metallic matrix composites and the evaluation of aluminum nitride addition effect10.1016/j.jallcom.2015.12.078 ↗
25. An overview on the use of titanium in the aerospace industry10.1016/0921-5093(96)10233-1 ↗
26. Effects of pre-sintering on microstructure and properties of TiBw/Ti6Al4V composites fabricated by hot extrusion with steel cup10.1016/j.msea.2015.04.050 ↗
27. Spark plasma sintering (SPS) – an advanced sintering technique for structural nanocomposite materials10.17159/2411-9717/2016/v116n12a12 ↗
28. Fabrication, characterization, and mechanical properties of spark plasma sintered Al–BN nanoparticle composites10.1016/j.msea.2015.06.059 ↗
29. Synthesis of Ti6Al4V alloy with nano-TiN microstructure via spark plasma sintering technique
30. Nanomechanical and tribological properties of hexagonal-boron nitride-enhanced sintered titanium alloy matrix composites10.1051/matecconf/202237003005 ↗
31. Nanoindentation studies on TiN nanoceramic reinforced Ti6Al4V matrix composite10.1016/j.ceramint.2017.12.042 ↗
32. Assessment of nanomechanical and tribological performance of refractory nitride-reinforced titanium alloy matrix composites developed by spark plasma sintering
33. Densification characteristics, microstructure and wear behaviour of spark plasma sintering processed titanium-niobium pentoxide (Ti-Nb2O5) based composites
34. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
35. Application of Taguchi design method for optimization of spark plasma sintering process parameters for Ti-6Al-4V/h-BN binary composite10.1088/2631-8695/ab561c ↗
36. Microstructural, phase, hardness, and oxidation resistance studies of AlN/h-BN-reinforced Ti6Al4V matrix composites synthesized by spark plasma sintering10.1007/s00170-020-05207-y ↗
37. Spark plasma sintering of Ti–Ni–TiCN composites: microstructural characterization, densification and mechanical properties10.1016/j.jallcom.2020.156559 ↗
38. Microstructure and properties of spark plasma sintered carbon nanotube reinforced aluminium matrix composites10.1002/adem.201100132 ↗
39. Influence of spark plasma sintering on microstructure and wear behaviour of Ti-6Al-4V reinforced with nanosized TiN10.1016/S1003-6326(18)64637-0 ↗
40. Wear and corrosion studies of graphite-aluminium composite reinforced with micro/nano-TiB2 via spark plasma sintering10.1002/mawe.201700062 ↗
41. Effect of boron carbide nano particles in CuSi4Zn14 silicone bronze nanocomposites on matrix powder surface morphology and structural evolution via mechanical alloying10.1016/j.ceramint.2018.11.007 ↗
42. Optimization of spark plasma sintering parameters of al-cnts-nb nano-composite using taguchi design of experiment
43. TiB2–SiC-based ceramics as alternative efficient micro heat exchangers10.1016/j.ceramint.2019.06.150 ↗
44. Effect of sintering pressure on microstructure and mechanical properties of hot-pressed Ti6Al4V-ZrO2 materials10.1016/j.matdes.2017.02.038 ↗
45. University of Cambridge
46. Super-strengthening and stabilizing with carbon nanotube harnessed high density nanotwins in metals by shock loading10.1038/srep15405 ↗
47. General relationship between strength and hardness10.1016/j.msea.2011.08.061 ↗
48. Wear and friction behavior of nanosized TiB2 and TiO2 particle-reinforced casting A356 aluminum nanocomposites: a comparative study focusing on particle capture in matrix10.1177/0021998314568327 ↗
49. Synthesis, characterization and dry sliding wear behaviour of Al7075–MoSi2 composites prepared by stir casting technique10.1007/s12666-019-01781-2 ↗
50. Dry sliding wear of Al/Saffil/C hybrid metal matrix composites10.1016/j.wear.2008.04.006 ↗
51. Mechanical properties and wear behaviour of Al–2 wt% Cu alloy composites reinforced by b4c nanoparticles and fabricated by mechanical milling and hot extrusion10.1016/j.matchar.2012.02.006 ↗
52. Wear in relation to friction - a review10.1016/S0043-1648(00)00382-3 ↗
53. Scanning velocity influence on microstructure, microhardness and wear resistance performance of laser deposited Ti6Al4V/TiC composite10.1016/j.matdes.2013.03.049 ↗
54. The oxidation behaviour of metals and alloys at high temperatures in atmospheres containing water vapour: a review10.1016/j.pmatsci.2007.11.001 ↗
55. Rizzo · 1960
56. Opila · 2016 · 329
57. Thermal oxidation of ZrC-Mo and ZrC-TiC alloy and pure titanium under external bending strain: experiment and Modelling10.1016/j.corsci.2017.01.009 ↗
58. High temperature oxidation behaviour and research status of modifications on improving high temperature oxidation resistance of titanium alloys and titanium aluminides: a review10.1016/j.jallcom.2016.06.212 ↗
59. Samal · 2016
60. Oxidation of spark plasma sintered ZrC-Mo and ZrC-TiC composites10.1016/j.ijrmhm.2017.03.019 ↗
61. Influence of cyclic thermal treatments on the oxidation behaviour of Ti-6Al-2Sn-4Zr-2Mo alloy10.1016/j.matchar.2018.08.049 ↗