Optimizing the SPIF parameters for enhancing microhardness and surface quality in Inconel 625 superalloy components
Source abstract
Abstract
Inconel 625 , a high-strength superalloy with excellent corrosion resistance, discovers wide applications in critical sectors such as aerospace, nuclear, marine, and petrochemical. Single-Point Incremental Forming (SPIF) has appeared as an adequate fabricating process for shaping superalloy components. This work used a systematic approach, implementing Response Surface Methodology (RSM) to explore the influence of SPIF process variables, including tool nose diameter, step size, tool spindle speed, and wall angle, on microhardness (MH) and surface roughness (SR). The experimental results have been analyzed to determine the influencing process variables and their optimal settings, which simultaneously enhance MH and reduce SR of Inconel 625 superalloy truncated cones using analysis of variance and the desirability function analysis approach. The most significant parameters that influence MH and SR were TND and SS, respectively. The development of quadratic models for MH and SR has been completed successfully. The maximum MH of 486.8 HV and minimum SR of 0.432 µm have been obtained at the optimal parametric setting of TND = 15 mm, SS = 0.4 mm, TSS = 900 rpm, and WA = 57.5° with the desirability values for MH, SR and combined are 0.832, 0.933, 0.881 respectively. The F-value of the MH model = 109.18 and SR Model = 78.24 implies that both models are significant and both models have excellent prediction strength. The percentage error between predicted and actual values of MH and SR in confirmation run results is less than 5 %.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. L.E. Shoemaker, Alloys 625 and 725: Trends in properties and applications, Proceedings of the International Symposium on Superalloys and Various Derivatives 718 (2005) 409–418. https://doi.org/10.7449/2005/superalloys_2005_409_418.10.7449/2005/Superalloys_2005_409_418 ↗
2. Asymmetric single point incremental forming of sheet metal10.1016/S0007-8506(07)60021-3 ↗
3. Improved geometric accuracy in single-point incremental forming of aerospace superalloy 625 using Taguchi desirability function analysis10.1108/AEAT-12-2022-0339 ↗
4. Formability and surface finish studies in single point incremental forming10.1115/1.4005458 ↗
5. Dieless incremental micro-forming of miniature shell objects of aluminum foils10.1016/j.ijmachtools.2009.07.001 ↗
6. Visual categorization and quantification of the orange peel effect in single point incremental forming at high forming speeds
7. Improving industrial suitability of incremental sheet forming process10.1007/s00170-011-3448-6 ↗
8. Influence of single-point incremental force process parameters on forming characteristics and microstructure evolution of AA-6061 alloy sheet10.1007/s11665-019-04446-9 ↗
9. Effects of rolling ball tool parameters on roughness, sheet thinning, and forming force generated during SPIF process10.1007/s00170-019-04918-1 ↗
10. Enhancing time efficiency on single point incremental forming processes10.1007/s12289-015-1251-x ↗
11. Single point incremental forming of Cu-Al composite sheets: a comprehensive study on deformation behaviors10.1016/j.acme.2018.11.011 ↗
12. Inverse analysis and multi-objective optimization of single-point incremental forming of AA5083 aluminum alloy sheet10.1007/s00500-019-04211-z ↗
13. Automatic 3D spiral toolpath generation for single point incremental forming10.1115/1.4002544 ↗
14. Study of the effect of process parameters on surface profile accuracy in single-point incremental sheet forming of AA1050-H14 aluminum alloy10.1155/2020/7265941 ↗
15. Effect of preheated microstructure vis-à-vis process parameters and characterization of orange peel in incremental forming of AA1050 sheets10.1007/s11665-019-04032-z ↗
16. Formability of lightweight alloys by hot incremental sheet forming10.1016/j.matdes.2011.08.024 ↗
17. On the high-speed Single Point Incremental Forming of titanium alloys10.1016/j.cirp.2013.03.053 ↗
18. Friction stir incremental forming of AA7075-O sheets: investigation on process feasibility10.1016/j.proeng.2017.10.829 ↗
19. Impact of process variables on surface roughness in negative incremental forming process
20. S.M. Najm, I. Paniti, Z.J. Viharos, Lubricants and affecting parameters on hardness in SPIF of AA1100 aluminium, in: 17th IMEKO TC 10 and EUROLAB Virtual Conference “Global Trends in Testing, Diagnostics and Inspection for 2030,” 2020: pp. 387–392.
21. Influence of single point incremental forming parameters on 1008-AISI surface hardness
22. Multi-response optimization on single-point incremental forming of hyperbolic shape Al-1050/Cu bimetal using response surface methodology10.1007/s00170-018-1812-5 ↗
23. Influence of tool size and step depth on the formability behavior of AA1050, AA6061-T6, and AA7075-T6 by single-point incremental forming process
24. Evaluation of power consumption and MRR in WEDM of Ti–6Al–4V alloy and its simultaneous optimization for sustainable production10.1007/s40430-018-1318-y ↗