Effect of microalloying additions on microstructural evolution and thermal stability in cast Al-Ni alloys
Source abstract
Abstract
Enhancement of thermal stability in Al-Ni alloys through microalloying with slow-diffusing elements, specifically Zr, has been previously reported which is attributed to Zr segregation at the Al/Al 3 Ni interface. In this study, we explore the influence of microalloying Al-Ni alloys with Zr, Ti, V, and Fe on microstructural evolution, hardness, and electrical and thermal conductivity across a range of heat-treatment temperatures from 300 to 450 °C. The distribution of microalloying elements and precipitates after heat treatment is characterized using atom probe tomography (APT). Our investigation confirms Zr segregation to the Al/Al 3Ni interface, while similar interfacial segregation is absent with the addition of Ti, V, and Fe. Additionally, our analysis of the Al 3 Ni microfiber morphology reveals that their coarsening and spheroidization rates are similar with and without interfacial segregation; thus, retaining the fiber reinforcement through interfacial segregation of slow diffusing elements may not be an effective strategy. Precipitation of L1 2 nanoparticles was found to be the dominant mechanism affecting enhanced hardness and electrical conductivity in Al-Ni-Zr alloys, attributed to precipitation strengthening and solute depletion, respectively. Similar precipitation was not observed for additions of Ti, V, and Fe following heat treatment. We provide a thermodynamic explanation for this limitation. The findings of this study suggest that an effective approach for designing Al-Ni alloys should involve prioritizing microalloying elements to maximize L1 2 precipitation and minimize solute content in the FCC-Al matrix post heat treatment, rather than focusing on Al/Al 3Ni interfacial segregation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Advanced lightweight materials for Automobiles: a review
2. Investigation of Al-Zn-Zr and Al-Zn-Ni alloys for high electrical conductivity and strength application10.1016/j.msea.2018.11.111 ↗
3. On the origin of a remarkable increase in the strength and stability of an Al rich Al-Ni eutectic alloy by Zr addition10.1016/j.actamat.2019.03.025 ↗
4. S. Palanivel, C. Kuehmann, J.R. Stucki, E. Filip, P.K. EdwardsAluminum alloys for die casting, U.S. Patent Application No. 17/264, 537, 2021. .
5. Measurements of the microhardness, electrical and thermal properties of the Al–Ni eutectic alloy10.1016/j.matdes.2011.05.030 ↗
6. The effects of microstructure and growth rate on microhardness, tensile strength, and electrical resistivity for directionally solidified Al–Ni–Fe alloys10.1016/j.jallcom.2015.11.080 ↗
7. New generation of eutectic Al-Ni casting alloys for elevated temperature services10.1016/j.msea.2017.10.034 ↗
8. Thermal stability of aluminum-nickel binary alloys containing the Al-Al3Ni eutectic10.1007/s11661-021-06372-9 ↗
9. Ambient-and elevated temperature properties of Sc-and Zr-modified Al–6Ni alloys strengthened by Al3Ni microfibers and Al3 (Sc, Zr) nanoprecipitates10.1016/j.msea.2022.142963 ↗
10. Tensile properties of hypoeutectic Al-Ni alloys: experiments and FE simulations10.1016/j.jallcom.2021.161664 ↗
11. Strengthening mechanisms in AlNiSc alloys containing Al3Ni microfibers and Al3Sc nanoprecipitates10.1016/j.actamat.2018.10.059 ↗
12. Atom probe tomographic studies of precipitation in Al-0.1 Zr-0.1 Ti (at%) alloys10.1017/S1431927607070882 ↗
13. Precipitation evolution in Al–Zr and Al–Zr–Ti alloys during aging at 450–600C10.1016/j.actamat.2007.11.011 ↗
14. Precipitation strengthening in aluminum-zirconium-vanadium alloys10.1016/j.jallcom.2017.07.144 ↗
15. Development and applications of the TCAL aluminum alloy database10.1016/j.calphad.2018.05.010 ↗
16. NIH Image to ImageJ: 25 years of image analysis10.1038/nmeth.2089 ↗
17. In situ site-specific specimen preparation for atom probe tomography10.1016/j.ultramic.2006.06.008 ↗
18. Gault · 2012
19. 2022, ASTM Designation E1461-13R22, Standard Test Method for Thermal Diffusivity by the Flash Method..
20. Pulse method of measuring thermal diffusivity at high temperatures10.1063/1.1729564 ↗
21. Temperature and finite pulse-time effects in the flash method for measuring thermal diffusivity10.1063/1.1729711 ↗
22. R. Taylor, L.I. CLARK, Finite pulse time effects flash diffusivity method (1974).
23. ASTM Designation E1269-11R18, 2018, Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry.
24. Thermodynamic assessment of the Al-Ni system10.1016/S0925-8388(96)02652-7 ↗
25. Nucleation and precipitation strengthening in dilute Al-Ti and Al-Zr alloys10.1007/s11661-007-9283-6 ↗
26. Stimulated heterogeneous distribution of Sc element and its correlated local hardening effect in Al–Fe–Ni-Sc alloy10.1016/j.msea.2019.138650 ↗
27. Thermodynamic assessment of the Al-Zr binary system10.1361/105497101770332695 ↗
28. Thermodynamic properties of the Al–Fe–Ni system acquired via a hybrid approach combining calorimetry, first-principles and CALPHAD10.1016/j.actamat.2009.07.031 ↗
29. On the strength of discontinuous silicon carbide reinforced aluminum composites10.1016/0036-9748(86)90210-3 ↗
30. Solidification of undercooled eutectic alloys containing a third element10.1016/j.actamat.2008.12.001 ↗
31. Analysis of three-dimensional atom-probe data by the proximity histogram10.1007/S100050010051 ↗
32. Circular of the Bureau of Standards no. 31: copper wire tables, National Bureau of Standards, Gaithersburg, MD, n.d.https://doi.org/10.6028/NBS.CIRC.31.10.6028/NBS.CIRC.31 ↗
33. Thermal conductivity of metals and alloys10.1179/095066086790324294 ↗
34. Bemerkungen zur schichtkristallbildung10.1515/ijmr-1942-340303 ↗
35. PANDAT software with PanEngine, PanOptimizer and PanPrecipitation for multi-component phase diagram calculation and materials property simulation10.1016/j.calphad.2008.08.004 ↗
36. Phase Transform. Mater.
37. Deform.-Mech. Maps Plast. Creep Met. Ceram.
38. M.A. Meyers, K.K. Chawla, in: Mech. Metall. Princ. Appl., Prentice-Hall, Englewood Cliffs, NJ, n.d.: p. 58.
39. Determination of γ–γ′ lattice misfit in a single-crystal nickel-based superalloy using convergent beam electron diffraction aided by finite element calculations10.1016/j.micron.2011.10.009 ↗
40. Critical evaluation and thermodynamic optimization of the Al–Ce, Al–Y, Al–Sc and Mg–Sc binary systems10.1016/j.calphad.2008.03.002 ↗
41. The Al–B–Nb–Ti system: III. Thermodynamic re-evaluation of the constituent binary system Al–Ti10.1016/j.jallcom.2007.10.061 ↗
42. A thermodynamic re-assessment of Al–V toward an assessment of the ternary Al–Ti–V system10.1016/j.calphad.2015.07.002 ↗
43. Theoretical investigations on structural, elastic, thermodynamic and electronic properties of Al3Ti and Al3V compounds in L12 structure under high pressure10.1088/2053-1591/aafec0 ↗
44. A comparative study on heterogeneous nucleation and mechanical properties of the fcc-Al/L1 2-Al 3 M (M= Sc, Ti, V, Y, Zr, Nb) interface from first-principles calculations10.1039/D0CP05832G ↗
45. Criteria for developing castable, creep-resistant aluminum-based alloys: a review
46. Eutectic growth under rapid solidification conditions10.1007/BF02650266 ↗
47. Microstructure in rapidly solidified Al-Ti alloys10.1016/0921-5093(93)90608-H ↗
48. Microstructure of a rapidly solidified Al–4V–2Fe ultrahigh strength aluminum alloy10.1016/S0921-5093(98)00552-8 ↗
49. Microstructural evolution and strengthening mechanisms in a heat-treated additively manufactured Al–Cu–Mn–Zr alloy10.1016/j.msea.2022.142928 ↗
50. Conductive Al alloys: the contradiction between strength and electrical conductivity10.1002/adem.202001249 ↗
51. Thermal and electrical conductivities of copper alloys
52. Correlation of metallic thermal and electrical conductivities for both solid and liquid phases10.1016/0017-9310(65)90086-4 ↗
53. Elevated temperature microstructural stability in cast AlCuMnZr alloys through solute segregation10.1016/j.msea.2019.138279 ↗