journal article·2024-05

Improving mechanical properties of an additively manufactured high-entropy alloy via post thermomechanical treatment

X.J. Zhao, S. Deng, J.F. Li, C. Li, Y.Z. Lei, S.N. Luo

Publisher page

Abstract

Thermomechanical treatment is applied to a CrMnFeCoNi high-entropy alloy fabricated via laser melting deposition (LMD) with 5 wt% WC addition to improve its mechanical properties. After the thermomechanical treatment, the yield strength of the LMD-fabricated alloy increases by 323 MPa, while the elongation remains nearly unchanged. Microstructures of the alloy before and after the thermomechanical treatment are thoroughly characterized. The LMD-fabricated alloy consists of the face-centered cubic matrix and M 23C 6 precipitates distributed both at grain boundaries and within matrix grains. The thermomechanical treatment leads to a significant refinement of the matrix grains and a more uniform distribution of the M 23C 6 precipitates, and largely these two factors give rise to the increase in yield strength. Numerous dislocations induced by internal thermal stress due to LMD are effectively eliminated through the thermomechanical treatment, contributing to the preservation of the ductility. The M 23C 6 carbide precipitates are characterized regarding their spatial distribution, chemical composition, and stacking faults, along with the orientation relationship and the interfaces between the matrix and the precipitates.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. A novel, single phase, non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility10.1016/j.scriptamat.2013.09.030 ↗
2. Nanoscale origins of the damage tolerance of the high-entropy alloy CrMnFeCoNi10.1038/ncomms10143 ↗
3. A fracture-resistant high-entropy alloy for cryogenic applications10.1126/science.1254581 ↗
4. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
5. Effect of the aluminium content of AlxCrFe1.5MnNi0.5 high-entropy alloys on the corrosion behaviour in aqueous environments10.1016/j.corsci.2008.04.011 ↗
6. Enhancing radiation tolerance by controlling defect mobility and migration pathways in multicomponent single-phase alloys10.1038/ncomms13564 ↗
7. Nanoprecipitate-strengthened high-entropy alloys10.1002/advs.202100870 ↗
8. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
9. Temperature dependence of the Hall-Petch relationship in CoCrFeMnNi high-entropy alloy10.1016/j.jallcom.2019.07.357 ↗
10. Grain growth and the Hall-Petch relationship in a high-entropy FeCrNiCoMn alloy10.1016/j.scriptamat.2012.12.002 ↗
11. Optimizing the coupled effects of Hall-Petch and precipitation strengthening 24 in a Al0.3CoCrFeNi high entropy alloy10.1016/j.matdes.2017.02.072 ↗
12. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
13. Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy10.1016/j.actamat.2017.07.029 ↗
14. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
15. Development of high-strength Co-free high-entropy alloys hardened by nanosized precipitates10.1016/j.scriptamat.2018.01.028 ↗
16. Ultrahigh strength and ductility in newly developed materials with coherent nanolamellar architectures10.1038/s41467-020-20109-z ↗
17. Carbide precipitation strengthening in fine-grained carbon-doped FeCoCrNiMn 25 high entropy alloy10.1016/j.jallcom.2019.06.204 ↗
18. Effects of carbon on the microstructures and mechanical properties of FeCoCrNiMn high entropy alloys10.1016/j.msea.2019.01.050 ↗
19. Investigating the micro and nanomechanical properties of CoCrFeNi - Cx high-entropy alloys containing eutectic carbides10.1016/j.msea.2020.140065 ↗
20. Strengthening of a CrMnFeCoNi highentropy alloy by carbide precipitation10.1016/j.jallcom.2019.04.121 ↗
21. The effect of carbon on the microstructures, mechanical properties, and deformation mechanisms of thermos-mechanically treated Fe40.4Ni11.3Mn34.8Al17.5Cr6 high entropy alloys10.1016/j.actamat.2016.12.074 ↗
22. Precipitation behavior of carbides in a low-carbon NiCoFeCr high-entropy alloy at 800 °C10.1016/j.matlet.2021.130020 ↗
23. Precipitation in the equiatomic high-entropy alloy CrMnFeCoNi10.1016/j.scriptamat.2015.10.025 ↗
24. Precipitation behavior and its impact on mechanical properties in an aged carbon-containing Al0.3Cu0.5CrFeNi2 high-entropy alloy10.1016/j.matchar.2019.109792 ↗
25. Recent advances on high-entropy alloys for 3D printing10.1002/adma.201903855 ↗
26. Nanosized precipitates and dislocation networks reinforced C-containing CoCrFeNi high-entropy alloy fabricated by selective laser melting10.1016/j.matchar.2018.08.019 ↗
27. Additive manufacturing of high-strength CrMnFeCoNi high-entropy alloys-based composites with WC addition10.1016/j.jmst.2019.05.062 ↗
28. A strong, ductile, high-entropy FeCoCrNi alloy with fine grains fabricated via additive manufacturing and a single cold deformation and annealing cycle
29. Outstanding strength-ductility synergy in Inconel 718 superalloy via laser powder bed fusion and thermomechanical treatment
30. Exceptional strength-ductility combination of CoCrFeMnNi high-entropy alloy with fully recrystallized structure by selective laser melting after post-deformation annealing10.1016/j.jmrt.2023.01.219 ↗
31. A super strong high entropy alloy with discontinuous precipitation and fine grains by additive manufacturing and thermomechanical treatment10.1016/j.msea.2023.145164 ↗
32. Effect of thermomechanical processing on microstructure and mechanical properties of the carbon-containing CoCrFeNiMn high entropy alloy10.1016/j.jallcom.2016.09.208 ↗
33. In situ observation of crystal rotation in Ni-based superalloy during additive manufacturing process10.1038/s41467-023-38727-8 ↗
34. Direct fabrication of single-crystal-like structure using quasi-continuous-wave laser additive manufacturing10.1016/j.jmst.2020.04.043 ↗
35. Formation behavior of long needle-like M23C6 carbides in a nickel-based alloy without γ' phase during long time aging10.1016/j.jallcom.2019.153259 ↗
36. Characterization of M23C6 carbides precipitating at grain boundaries in 100Mn13 steel10.1007/s11661-016-3656-7 ↗
37. Microscale residual stresses in additively manufactured stainless steel10.1038/s41467-019-12265-8 ↗
38. Signatures of the unique microstructure of additively manufactured steel observed via diffraction10.1016/j.scriptamat.2018.06.008 ↗
39. Effect of second-phase particle morphology on grain growth kinetics10.1016/j.actamat.2009.07.025 ↗
40. The observation of the structure of M23C6/γ coherent interface in the 100Mn13 high carbon high manganese steel10.1007/s11661-017-4462-6 ↗
41. Direct observation and modeling of growth-induced stacking fault in chromium-rich γ-M23C6 carbides10.1016/j.scriptamat.2019.11.050 ↗