Comparative study of Ni-TaC composites via high-energy ball milling activation and spark plasma sintering: Reinforcement, densification, oxidation resistance, and mechanical property
Source abstract
Abstract
In this study, metal matrix composites (MMCs) were produced using nickel (Ni) and tantalum carbide (TaC) powders by high-energy ball milling, and their structural characteristics and microstructural evolution against reinforcement interactions were investigated. The nominal compositions of the Ni-TaC composites were Ni (5, 10, 15, and 20) vol% TaC. The formation of the ductile-brittle (Ni-TaC) components was affected by the continued severe deformation caused by the high-energy ball milling. As a result, a Ni 0.92Ta 0.08 solid solution was formed, which influenced the lattice distortion and peak shift. The Ni-TaC composites were densely consolidated by spark plasma sintering at 900°C and 60 MPa. The effect of the TaC on the sinterability and mechanical properties of Ni-TaC composites was analyzed based on the shrinkage rate, densification strain, densification strain, uniform distribution of carbide phase in the Ni matrix, grain size, and morphology of crack propagation. Oxidation behavior was analyzed by scanning electron microscopy with energy dispersive X-ray diffraction. The results indicate that the formation of the NiO and TaO 2 passive layer for Ni- 15 vol% TaC composites resulted in a 12 µm (thick) oxide layer. This was the thinnest oxide layer on surface at oxidation 1000°C.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Friction stir processing of cold-sprayed high-entropy alloy particles reinforced aluminium matrix composites: corrosion and wear properties10.1007/s12540-022-01248-y ↗
2. Synthesis and characterization of Mg-Matrix based TiO2/Al2O3 composite materials10.1007/s12540-020-00954-9 ↗
3. Fabrication of AA2024/SiCp metal matix composite by mechanical alloying10.1007/s12540-020-00924-1 ↗
4. Ti6Al4V/SiC metal matrix composites additively manufactured by direct laser deposition10.1007/s12540-022-01191-y ↗
5. Evolution of phase and their influence on shape memory effect by varying sintering parameters on NiTi alloys10.1007/s12540-021-01166-5 ↗
6. Existence of partially degenerate electrical transport in intermetallic Cu2SnSe3 thermoelectric system sintered at different temperatures10.1007/s12540-021-01074-8 ↗
7. Modified unreacted core model for reduction of manganese ore by CO gas10.1007/s12540-021-01020-8 ↗
8. Properties of aluminium nano composites bearing alumina particles and multiwall carbon nanotubes manufactured by mechanical alloying and microwave sintering10.1007/s12540-022-01238-0 ↗
9. Synthesis and characterization of copper-alumina metal matrix composite by conventional and spark plasma sintering10.1016/j.jallcom.2011.11.136 ↗
10. Consolidation of aluminium-based metal matrix composites via spark plasma sintering10.1016/j.msea.2015.09.027 ↗
11. Synergistic effects of MWCNTs and high-pressure torsion-induced grain refinement on microhardness, tribological properties, and corrosion behavior of Cu and Cu/MWCNT nanocomposites10.1007/s12540-021-01112-5 ↗
12. Spark plasma sintering of Fe-TiC composite powders10.4150/KPMI.2014.21.5.382 ↗
13. Manufacturing technology and properties of Fe/TaC metal matrix composite coatings produced on medium carbon steel using laser processing—preliminary study on the single laser tracks10.3390/ma14185367 ↗
14. Fabrication of in situ Ni(W)-WC nano composites via mechanical alloying and spark plasma sintering10.1016/j.jallcom.2012.07.085 ↗
15. Application of spark plasma sintering (SPS) for the fabrication of in situ Ni-TiC nanocomposite clad layer10.1016/j.jallcom.2015.01.276 ↗
16. A review of the design, properties, applications, and prospects of Ni-based composite powders10.1016/j.matdes.2021.109945 ↗
17. Cast in situ composites of Ni3Al/MeC type
18. A new thermally stable structural duplex Ni-TaC nanocomposite10.1016/S0921-5093(00)01654-3 ↗
19. Electrochemical fabrication of multicore-shell Ni-TaC composite particles in molten salt10.1149/2.0101603jes ↗
20. Mechanical alloying of immiscible metallic systems: process, microstructure, and mechanism10.1002/adem.202001098 ↗
21. Densification mechanisms in spark plasma sintering: effect of particle size and pressure10.1016/j.powtec.2012.01.005 ↗
22. Synthesis of Ni-TiC composite by ball milling and heat treatment of NiO/TiO2/C powder mixture10.1007/s12666-019-01805-x ↗
23. Mechanical and tribological behavior of mechanically alloyed Ni-TiC composites processed via spark plasma sintering10.3390/ma13225306 ↗
24. Elastic properties of tantalum carbide (TaC)10.1016/j.ssc.2005.01.036 ↗
25. Rapid consolidation of WC-ZrSiO4 hard materials by spark plasma sintering: Microstructure, densification, and mechanical properties10.1007/s12540-021-00969-w ↗
26. Influence of cryomilling on crystallite size of aluminum powder and spark plasma sintered component10.3390/nano12030551 ↗
27. Anti-corrosion coatings for protecting Nb-based alloys exposed to oxidation environments: a review10.1007/s12540-022-01222-8 ↗
28. Structure and properties of heat-resistant alloys NiAl-Cr-Co-X (X = La, Mo, Zr, Ta, Re) and fabrication of powders for additive manufacturing10.3390/ma14123144 ↗
29. The influence of heat treatment on the crystallite size, dislocation density, stacking faults probability and optical band gap of nanostructured cadmium sulphide films10.1016/j.mssp.2014.09.033 ↗
30. Cemented carbide microstructures: a review10.1016/j.ijrmhm.2018.12.004 ↗
31. The variation of lattice parameter with the carbon content of tantalum carbide10.1021/j100905a028 ↗
32. Influence of powder shape on atomic diffusivity and resultant densification mechanisms during spark plasma sintering10.1016/j.jallcom.2019.06.176 ↗
33. Sintering kinetic window for yittria-stabilized cubic zirconia.10.1016/j.jeurceramsoc.2015.12.044 ↗
34. Properties of TiC-Mo2C-WC-Ni cermet by a high-energy ball milling/spark plasma sintering
35. Grain boundary sliding contribution to superplastic deformation in alumina-zirconia composites10.1023/A:1018628902218 ↗
36. Effect of VC addition on sinterability and microstructure of ultrafine Ti(C,N)-based cermets in spark plasma sintering10.1016/j.jallcom.2007.05.091 ↗
37. Mechanical properties of low-pressure sintered WC-6Co cemented carbide doped with graphene oxide/alumina composite particles10.1016/j.ceramint.2021.02.222 ↗
38. Effect of crack bridging on the toughening of ceramic/graphene composite10.1515/rams-2018-0047 ↗
39. Effect of TiN addition on the microstructure and mechanical properties of TiB2-FeNi based cermets10.1016/j.msea.2018.11.067 ↗
40. Segregation behaviors of nonmetallic impurities on grain boundary of austenitic steel10.1016/j.matchemphys.2022.127227 ↗
41. Synergistic effects of Ta and Mo on the hydrogen embrittlement resistance in ultra-high strength hot stamping steel10.1016/j.msea.2023.144956 ↗
42. Isothermal oxidation behavior and mechanism of a nickel-based superalloy at 1000°C10.1007/s12613-017-1461-y ↗
43. Effects of Ta on the high temperature oxidation behavior of IN617 alloy in air10.1016/j.corsci.2020.108682 ↗
44. The O-Ta (oxygen-tantalum) system10.1007/BF02648373 ↗
45. Oxidation kinetic analysis of a mixed uranium dicarbide and graphite compound10.1016/j.jnucmat.2013.02.028 ↗
46. Absorption of heavy metal ion from aqueous solution by nickel oxide nano catalyst prepared by different methods10.1016/j.ejpe.2015.02.003 ↗
47. Improving tribological and thermal properties of Al alloy using CNTs and Nb nanopowder via SPS for powder transmission conductor10.1016/S1003-6326(20)65216-5 ↗
48. A review of models for effective thermal conductivity of composite materials