journal article·2024-05

Breaking conventional limits of silicon content in Fe-xSi magnetic alloys through additive manufacturing

Wei Hock Teh, Li Ping Tan, Shilin Chen, Fengxia Wei, Jing Jun Lee, Shakti P. Padhy, V. Chaudhary, Cheng Cheh Tan, R.V. Ramanujan

Publisher page

Abstract

Silicon steels, e.g., Fe-3.2% Si alloys, are widely used in energy conversion and transmission. Increasing the Si content can enhance electrical resistivity and reduce magnetic hysteresis loss, improving the energy efficiency. However, high silicon content decreases ductility and workability, limiting the Si content of the alloys that can be produced by conventional manufacturing. Instead, we used additive manufacturing by the direct energy deposition technique to produce high Si content Fe-Si alloys. Dense samples with up to 20% Si were successfully fabricated for the first time. A substantial change in saturation magnetization (from 90 to 209 emu/g) and a three-fold increase in hardness was observed with higher Si content. The electrical resistivity values tripled, enhancing the attractiveness of these higher Si content alloys. The yield strength, ultimate tensile strength also increased, from 71 to 545 MPa, and 91 to 567 MPa, respectively. The coercivity remained relatively unchanged in the range of 9.1 to 10.8 Oe. Our results demonstrate the potential of fabrication of bulk high Si content Fe-Si alloys via additive manufacturing. ; Agency for Science, Technology and Research (A*STAR) ; This work is supported by the AME Programmatic Fund by the Agency for Science, Technology and Research, Singapore [Grant No. A1898b0043].
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Materials for electrification of everything: moving toward sustainability10.1557/s43577-021-00248-4 ↗
2. Toward a sustainable more electrified future: the role of electrical machines and drives10.1109/MELE.2018.2889551 ↗
3. Soft magnetic material status and trends in electric machines10.1109/TIE.2016.2613844 ↗
4. High power density technologies for large generators and motors for marine applications with focus on electrical insulation challenges10.1049/hve.2019.0055 ↗
5. High speed electrical generators, application, materials and design
6. Modern soft magnets: amorphous and nanocrystalline materials10.1016/j.actamat.2012.10.040 ↗
7. O.K. Goldbeck, Iron - binary phase diagrams, 1st ed., Springer Berlin, Heidelberg, 1982.10.1007/978-3-662-08024-5_1 ↗
8. T.B. Massalski, H. Okamoto, P.R. Subramanian, L. Kacprzak, Binary alloy phase diagrams, 2nd ed., ASM International, 1990.
9. Review of Fe-6.5 wt%Si high silicon steel - a promising soft magnetic material for sub-kHz application10.1016/j.jmmm.2019.02.089 ↗
10. Cracking of soft magnetic FeSi to reduce eddy current losses in stator cores
11. Core loss reduction in electrical steels through materials processing10.1063/1.369134 ↗
12. Si-steel thin-strip prepared by twin-roll continuous casting10.1142/S0218625X11014515 ↗
13. Magnetostriction and applications of 6.5% Si steel sheet10.1063/1.348028 ↗
14. The magnetic properties of Fe-Si 6.5 wt% alloys obtained by a SiCl4-based CVD process10.1016/0304-8853(96)00144-8 ↗
15. Thermodynamic and kinetic analysis of the melt spinning process of Fe-6.5 wt% Si alloy10.1016/j.jallcom.2018.08.293 ↗
16. Ordering–disordering phenomena and micro-hardness characteristics of B2 phase in Fe-(5-6.5%)Si alloys10.1016/j.msea.2005.07.012 ↗
17. The B2 and DO3 ordering reactions in iron–silicon alloys in the vicinity of the Curie temperature10.1179/030634575790445279 ↗
18. Additive manufacturing of magnetic materials10.1016/j.pmatsci.2020.100688 ↗
19. Additive manufacturing of soft magnetic materials and components
20. I.S.O., ISO/ASTM 52900:2021, in: Additive manufacturing - General principles - Fundamentals and vocabulary, 2015, pp. 28.
21. Influence of molten-pool cooling rate on solidification structure and mechanical property of laser additive manufactured Inconel 71810.1016/j.jmrt.2022.06.162 ↗
22. Solidification modes during additive manufacturing of steel revealed by high-speed X-ray diffraction10.1016/j.actamat.2023.118713 ↗
23. Effect of annealing on the microstructure and magnetic properties of soft magnetic Fe-Si produced via laser additive manufacturing10.1016/j.scriptamat.2017.08.042 ↗
24. Electron beam-based additive manufacturing of Fe93.5Si6.5 (wt%) soft magnetic material with controllable magnetic performance10.1016/j.scriptamat.2021.114460 ↗
25. Direct energy deposition applied to soft magnetic material additive manufacturing10.1016/j.jmapro.2022.10.004 ↗
26. Magnetic and mechanical properties of additive manufactured Fe-3wt%Si material10.1016/j.jmmm.2023.170907 ↗
27. Influence of energy density on the microstructure, growth orientation, and anisotropy of magnetic properties in additively manufactured Fe-3.8wt%Si transformer steels10.1016/j.mtla.2023.101854 ↗
28. Accelerated and conventional development of magnetic high entropy alloys10.1016/j.mattod.2021.03.018 ↗
29. Magnetic and mechanical properties of additively manufactured Alx(CoFeNi) complex concentrated alloys10.1016/j.scriptamat.2022.115149 ↗
30. Additive manufacturing of functionally graded Co–Fe and Ni–Fe magnetic materials10.1016/j.jallcom.2020.153817 ↗
31. High throughput multi-property evaluation of additively manufactured Co-Fe-Ni materials libraries
32. ASTM Standard E112–13, 2021, "Standard Test Methods for Determining Average Grain Size", ASTM International, West Conshohocken, PA, 2021, DOI: 10.1520/E0112–13R21, 〈www.astm.org〉.10.1520/E0112-13R21 ↗
33. Accelerated automated screening of viscous graphene suspensions with various surfactants for optimal electrical conductivity10.1039/D1DD00008J ↗
34. Rapid multiple property determination from bulk materials libraries prepared from chemically synthesized powders10.1038/s41598-022-13691-3 ↗
35. Accelerated property evaluation of Ni–Co materials libraries produced by multiple processing techniques10.1016/j.jmrt.2022.08.152 ↗
36. Resistivity
37. C.B. Honsberg S.G. Bowden. Four Point Probe Resistivity Measurements in: Photovoltaics Education Website. https://www.pveducation.org/pvcdrom/characterisation/four-point-probe-resistivity-measurements. 2019.
38. ASM, Properties and selection: nonferrous alloys and special-purpose materials, ASM International, 1990.
39. Effects of laser irradiation on iron loss reduction for Fe–3%Si grain-oriented silicon steel10.1016/j.actamat.2004.10.040 ↗
40. Microstructure and mechanical properties of rapidly quenched Fe-6.5wt% Si alloy10.1016/j.jallcom.2010.03.075 ↗
41. Powder bed fusion of soft-magnetic iron-based alloys with high silicon content10.1016/j.jmatprotec.2023.117991 ↗
42. Deformation and fracture behavior of rapidly solidified and annealed iron-silicon alloys10.1007/s11661-007-9436-7 ↗
43. Improved ductility of Fe-6.5 wt%Si alloy under electropulsing tension10.1016/j.msea.2022.143639 ↗
44. ASTM Standard E9-19 · 2019
45. Novel Fe2CoNi(AlSi)x high-entropy alloys with attractive soft magnetic and mechanical properties10.1007/s00339-021-04988-7 ↗
46. Thermomagnetic properties of nanocrystalline Fe–Si alloys with high Si content10.1016/j.physb.2014.02.032 ↗
47. Core loss reduction for Fe-6.5wt%Si soft magnetic composites doped with Co element10.1016/j.jmmm.2020.166553 ↗
48. Characterisation of the Fe-10wt% Si nanocrystalline powder obtained by mechanical alloying and annealing10.1016/j.jmmm.2017.06.010 ↗
49. Influence of the order-disorder transition on the magnetic properties of Fe75Al25-xSix alloys10.1016/j.intermet.2015.10.008 ↗
50. Magnetization process in nanocrystalline ferromagnets10.1016/0921-5093(91)90003-6 ↗
51. Additive manufacturing of magnetic materials
52. Electrical and magnetic properties of the elements