Stabilizing LiNi0.8Co0.1Mn0.1O2 cathodes with a mixed ionic-electronic conducting Li0.34La0.55MnO3- multifunctional coating formed via in-situ conversion of surface Li residual
Source abstract
Abstract
In this work, we for the first time utilize the harmful surface Li residual on NCM811 to in-situ form a mixed Li +/electron conducting Li 0.34La 0.55MnO 3-x (LLMO) coating. The formation of the (electro)chemically stable LLMO coating not only achieves effective surface cleaning, but also stabilizes the cathode surface against electrolyte attack, alleviating structure degradation and intergranular cracking. Equally importantly, the mixed conducting LLMO layer affords considerably high Li + and electronic conductivities (2.35 ×10 −5 S/cm and 1.86 ×10 −3 S/cm respectively), accelerating the charge-transfer process at the interface. The in-situ LLMO-coated NCM811 exhibits notable improvements in both rate and cycling performance, featuring a capacity retention rate of 82.51% over 100 cycles at 1 C in stark contrast to 48.26% of the pristine NCM811. When combined with a dendrite-suppressed Li@Pb@carbon cloth composite Li metal anode in a full battery, a high capacity retention rate of 86.96% over 200 cycles at 1 C and a N/P ratio of 37.7 is achieved, significantly outperforming that with NCM811 (42.24%, 40.2). This study provides a novel and comprehensive solution to stabilize nickel-rich layered cathode materials for high-energy-density Li-metal batteries.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. Suppressing structural degradation of Ni-rich cathode materials towards improved cycling stability enabled by a Li2MnO3 coating10.1039/D0TA00924E ↗
2. Virtual special issue of recent research advances in China: batteries and energy storage10.1021/acs.energyfuels.1c01905 ↗
3. Improvement in interfacial stability of high-rate Ni-rich oxide cathode by multifunctional LiTi0.5Zr1.5(PO4)3 conductive buffer layer10.1016/j.cej.2022.137663 ↗
4. Layered ternary metal oxides: performance degradation mechanisms as cathodes, and design strategies for high-performance batteries10.1016/j.pmatsci.2020.100655 ↗
5. Constructing stable interface layer for boosting high-voltage cycling performance of single-crystal Ni-rich cathodes10.1016/j.jpowsour.2023.232653 ↗
6. Reaction product analysis of the most active “inactive” material in lithium-ion batteries-the electrolyte. II: Battery operation and additive impact10.1021/acs.chemmater.9b04135 ↗
7. Microstructure-controlled Ni-rich cathode material by microscale compositional partition for next-generation electric vehicles10.1002/aenm.201803902 ↗
8. Wet-CO2 pretreatment process for reducing residual lithium in high-nickel layered oxides for lithium-ion batteries10.1021/acsami.1c06277 ↗
9. Rational design of coating ions via advantageous surface reconstruction in high-nickel layered oxide cathodes for lithium-ion batteries10.1002/aenm.202101112 ↗
10. Wet-CO2 pretreatment process for reducing residual lithium in high-nickel layered oxides for lithium-ion batteries10.1021/acsami.1c06277 ↗
11. High reactivity of the nickel-rich LiNi1-x-yMnxCoyO2 layered materials surface towards H2O/CO2 atmosphere and LiPF6-based electrolyte10.1016/j.jpowsour.2020.228204 ↗
12. Ambient storage derived surface contamination of NCM811 and NCM111: performance implications and mitigation strategies10.1149/2.0011912jes ↗
13. Impact of residual lithium on the adoption of high-nickel layered oxide cathodes for lithium-ion batteries10.1021/acs.chemmater.0c02808 ↗
14. Insight into thermal analysis kinetics of surface protected LiNi0.8Co0.15Al0.05O2 cathode for safe lithium-ion batteries10.1016/j.ensm.2022.04.014 ↗
15. New organic complex for lithium layered oxide modification: ultrathin coating, high-voltage, and safety performances10.1021/acsenergylett.9b00032 ↗
16. Suppressed microcracking and f penetration of Ni-rich layered cathode via the combined effects of titanium dioxide doping and coating
17. Synergistic effect of F(-) doping and LiF coating on improving the high-voltage cycling stability and rate capacity of LiNi0.5Co0.2Mn0.3O2 cathode materials for lithium-ion batteries10.1021/acsami.8b10016 ↗
18. Mixed-conducting interlayer boosting the electrochemical performance of Ni-rich layered oxide cathode materials for lithium ion batteries10.1016/j.jpowsour.2019.03.014 ↗
19. Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries10.1016/j.cej.2021.129964 ↗
20. Improving the cycling and air-storage stability of LiNi0.8Co0.1Mn0.1O2 through integrated surface/interface/doping engineering10.1039/C9TA13014D ↗
21. Improving cycling performance and rate capability of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode materials by Li4Ti5O12 coating10.1016/j.electacta.2018.02.049 ↗
22. Mixed-conducting interlayer boosting the electrochemical performance of Ni-rich layered oxide cathode materials for lithium ion batteries10.1016/j.jpowsour.2019.03.014 ↗
23. Magnetic and electrical properties of LBaMn2O6−γ(L=Pr,Nd, Sm, Eu, Gd, Tb) manganites10.1103/PhysRevB.66.184424 ↗
24. The study of the prospects for the use of Li0.15Sr0.85TiO3 ceramics
25. Strain-retardant coherent perovskite phase stabilized Ni-rich cathode10.1038/s41586-022-05238-3 ↗
26. Mixed ionic-electronic conductor of perovskite LixLayMO3−δ toward carbon-free cathode for reversible lithium-air batteries10.1002/aenm.202001767 ↗
27. Destabilization of the surface structure of Ni-rich layered materials by water-washing process10.1016/j.ensm.2021.11.006 ↗
28. Washing effect on properties of LiNi0.8Co0.15Al0.05O2 cathode material by ethanol solvent10.1016/S1003-6326(18)64805-8 ↗
29. The effects of washing on LiNi0.83Co0.13Mn0.04O2 cathode materials10.1016/j.ssi.2019.01.037 ↗
30. Surface washing method using protonated polyaniline for Ni-rich LiNi0.8Co0.1Mn0.1O2 material of lithium ion batteries10.1016/j.electacta.2017.07.169 ↗
31. In situ inorganic conductive network formation in high-voltage single-crystal Ni-rich cathodes10.1038/s41467-021-25611-6 ↗
32. Magnetic properties of anion-deficient La1−xBaxMnO3−x/2 (0 ≤ x ≤ 0.30) manganites10.1134/1.1545390 ↗
33. Evaluation of the efficiency of detection and capture of manganese in aqueous solutions of FeCeOx nanocomposites doped with Nb2O510.3390/s20174851 ↗
34. Preparation and electrochemical characterization of La and Al Co-doped NCM811 cathode materials10.1021/acsomega.1c01552 ↗
35. Exploration of crystal structure, magnetic and dielectric properties of titanium-barium hexaferrites10.1016/j.mseb.2021.115345 ↗
36. Trukhanov Impact of In3+ cations on structure and electromagnetic state of M-type hexaferrites10.1016/j.jechem.2021.12.027 ↗
37. Enhanced electrochemical properties of Ni-rich layered cathode materials via Mg2+ and Ti4+ co-doping for lithium-ion batteries10.1016/j.jcis.2021.05.167 ↗
38. Lithium-conductive LiNbO3 coated high-voltage LiNi0.5Co0.2Mn0.3O2 cathode with enhanced rate and cyclability10.1016/j.gee.2020.09.011 ↗
39. Influence of annealing atmosphere on Li2ZrO3-coated LiNi0.6Co0.2Mn0.2O2 and its high-voltage cycling performance10.1016/j.electacta.2019.01.077 ↗
40. Atomic layer deposition of lithium tantalate solid-state electrolytes10.1021/jp4063302 ↗
41. Li2ZrO3 based Li-ion conductors doped with halide ions & sintered in oxygen-deficient atmosphere10.1016/j.ceramint.2021.08.076 ↗
42. Electrical conductivity of Al-doped Li2ZrO3 ceramics for Li-ion conductor electrolytes10.1016/j.ceramint.2021.03.108 ↗
43. Nonstoichiometry and Li-ion transport in lithium zirconate: the role of oxygen vacancies10.1111/jace.15583 ↗
44. In-situ formation of hybrid Li3PO4-AlPO4-Al(PO3)3 coating layer on LiNi0.8Co0.1Mn0.1O2 cathode with enhanced electrochemical properties for lithium-ion battery10.1016/j.cej.2019.122959 ↗
45. An air-stable high-nickel cathode with reinforced electrochemical performance enabled by convertible amorphous Li2CO3 modification10.1002/adma.202108947 ↗
46. Building a stabilized structure from surface to bulk of Ni-rich cathode for enhanced electrochemical performance10.1016/j.ensm.2022.01.056 ↗
47. Chemically converting residual lithium to a composite coating layer to enhance the rate capability and stability of single-crystalline Ni-rich cathodes10.1016/j.nanoen.2021.106901 ↗
48. Controllable formation of lithium carbonate surface phase during synthesis of nickel-rich LiNi0.9Mn0.1O2 in air and its protection role in electrochemical reaction10.1016/j.jallcom.2018.08.243 ↗
49. Simultaneous enhancement of interfacial stability and kinetics of single-crystal LiNi0.6Mn0.2Co0.2O2 through optimized surface coating and doping10.1021/acs.nanolett.0c03778 ↗
50. Improved high-voltage performance of LiNi0.87Co0.1Al0.03O2 by Li+- conductor coating10.1016/j.cej.2020.126442 ↗
51. Comprehensive study of Al- and Zr-modified LiNi0.8Mn0.1Co0.1O2 through synergy of coating and doping10.1021/acsaem.0c01420 ↗
52. Correlation of oxygen non-stoichiometry to the instabilities and electrochemical performance of LiNi0.8Co0.1Mn0.1O2 utilized in lithium ion battery10.1016/j.jpowsour.2015.02.095 ↗
53. Enhanced structure and electrochemical stability of single crystal nickel-rich cathode material by La2Li0.5Co0.5O4 surface coating10.1016/j.ceramint.2022.03.020 ↗
54. Long-life nickel-rich layered oxide cathodes with a uniform Li2ZrO3 surface coating for lithium-ion batteries10.1021/acsami.7b00070 ↗
55. A dendrite-suppressed and utilization-improved metallic Li anode enabled by lithiophilic nano-Pb decoration on carbon cloth10.1039/D2TA00834C ↗
56. Essential effect of the electrolyte on the mechanical and chemical degradation of LiNi0.8Co0.15Al0.05O2 cathodes upon long-term cycling10.1039/D0TA07814J ↗
57. High-voltage charging-induced strain, heterogeneity, and micro-cracks in secondary particles of a nickel-rich layered cathode material
58. Investigation into mechanical degradation and fatigue of high-Ni NCM cathode material: a long-term cycling study of full Cells10.1021/acsaem.9b01354 ↗
59. Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries10.1038/ncomms14101 ↗
60. Enhancement on structural stability of Ni-rich cathode materials by in-situ fabricating dual-modified layer for lithium-ion batteries10.1016/j.nanoen.2019.104043 ↗
61. Extending the service life of high-Ni layered oxides by tuning the electrode-electrolyte interphase10.1002/aenm.201801957 ↗
62. The cathode-electrolyte interface in the Li-ion battery10.1016/j.electacta.2004.03.049 ↗
63. The effect of electrolyte additives on electrochemical performance of silicon/mesoporous carbon (Si/MC) for anode materials for lithium-ion batteries10.1016/j.electacta.2017.06.128 ↗
64. Mitigating the surface reconstruction of Ni-rich cathode via P2-Type Mn-rich oxide coating for durable lithium ion batteries10.1021/acsami.2c06264 ↗
65. Highly-stable P2–Na0.67MnO2 electrode enabled by lattice tailoring and surface engineering10.1016/j.ensm.2019.11.024 ↗
66. Organo-soluble decanoic acid-modified Ni-Rich cathode material LiNi0.90Co0.07Mn0.03O2 for lithium-ion batteries10.1021/acsami.2c02797 ↗
67. Tailoring atomic distribution in micron-sized and spherical Li-rich layered oxides as cathode materials for advanced lithium-ion batteries10.1039/C6TA01878E ↗
68. Lithium phosphonate functionalized polymer coating for high-energy Li[Ni0.8Co0.1Mn0.1]O2 with superior performance at ambient and elevated temperatures10.1002/adfm.202105343 ↗
69. Enhancement structural stability of LiNi0.8Co0.1Mn0.1O2 via S2− doping combine with Li2SO4 coating co-modification10.1016/j.electacta.2022.139966 ↗
70. Li4V2Mn(PO4)4-stablized Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathode materials for lithium ion batteries10.1016/j.nanoen.2019.103889 ↗
71. Facilitating the operation of lithium-ion cells with high-nickel layered oxide cathodes with a small dose of aluminum10.1021/acs.chemmater.8b01077 ↗
72. Effect of ambient storage on the degradation of Ni-rich positive electrode materials (NMC811) for Li-ion batteries10.1149/2.0401802jes ↗
73. In-situ formation of hybrid Li3PO4-AlPO4-Al(PO3)3 coating layer on LiNi0.8Co0.1Mn0.1O2 cathode with enhanced electrochemical properties for lithium-ion battery10.1016/j.cej.2019.122959 ↗
74. Designed graphite with an activated edge for fast-charging lithium-ion storage properties10.1039/D2CC01927B ↗
75. Synthesis method for long cycle life lithium-ion cathode material: nickel-rich core-shell LiNi0.8Co0.1Mn0.1O210.1021/acsami.8b02000 ↗
76. New insight into the atomic structure of electrochemically delithiated O3-Li((1)-x)CoO(2) (0 </= x </= 0.5) nanoparticles10.1021/nl303036e ↗
77. Mixed-carbon-coated LiMn0.4Fe0.6PO4 nanopowders with excellent high rate and low temperature performances for lithium-ion batteries10.1016/j.electacta.2016.03.017 ↗
78. Analysis of the chemical diffusion coefficient of lithium ions in Li3V2(PO4)(3) cathode material10.1016/j.electacta.2009.11.096 ↗
79. Self-ball milling strategy to construct high-entropy oxide coated LiNi0.8Co0.1Mn0.1O2 with enhanced electrochemical performance10.1007/s40145-022-0582-6 ↗
80. Improving ionic conductivity with bimodal-sized Li7La3Zr2O12 fillers for composite polymer electrolytes10.1021/acsami.8b21770 ↗