journal article·2024-03

Binder-free ultrathin pellets of nanocomposites based on Fe3O4@nitrogen-doped reduced graphene oxide aerogel for electromagnetic interference shielding

A.S. Carvalho, A.R. Santos, D.C.O. Cabral, D.M. Oliveira, L.K.C.S. Assis, E.L.T. França, F.R.S. Quirino, S. Castro-Lopes, O.M.M.M. da Costa, E. Padrón-Hernández

Publisher page

Abstract

The synergistic effects of a hybrid nanocomposite (Fe 3O 4 @NrGO) and their influence on electromagnetic pollution shielding (EMI SE) were explored. This is a current concern where the impacts need to be fully clarified and assertively addressed. Thus, the main focus of the paper was based on the physical and mechanical properties of porosity, surface area, flexibility and, mainly, electrical conductivity of the graphene aerogels, which do not require the use of a binder and are of great interest for the EMI SE area. The precursors (rGO, NrGO and Fe 3O 4 ), as well as the nanocomposite, underwent thorough structural characterisation to understand their nature. Characteristic bands of C-N/C=N bonds and a content of 8.03 at% N were identified, with a high N:O ratio of 1.31, indicating efficient doping of the conductive matrix. The aerogel NrGO phase, with a quality of just 5 layers, and the Fe 3O 4 phase, with domains around 5 nm, were confirmed, as well as the superposition of the signals in the Fe 3O 4 @NrGO pattern. Electron microscopy images and elemental map also demonstrated the efficient distribution of Fe 3O 4 in the matrix and its porous appearance. Thus, leveraging the advantages of aerogel, extremely light ultra-thin pellets measuring 0.1 mm and weighing 10 mg were produced. The high nitrogen doping of the graphene network, the presence of magnetic nanoparticles, as well as the high surface area and porosity achieved in the production of the nanocomposite, were responsible for high specific shielding effectiveness of 2730 dB · cm −1 at 10.7 GHz and an average in the X-band of 1590 dB · cm −1. Thus, the improved and synergistic mechanisms highlighted the promising advantages of using these highly porous doped materials, demonstrating that the Fe 3O 4@NrGO hybrid presents high value for investigations in the application of EMI SE.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electromagnetic wave absorption materials · Graphene research and applications · Graphene and Nanomaterials Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. BBC News, France halts iPhone 12 sales over radiation levels, 〈https://www.bbc.com/news/technology-66795168〉, 2023 (accessed 19 September 2023).
2. Benefits and hazards of electromagnetic waves; telecommunication, physical and biomedical: a review
3. From waste to wealth: a critical review on advanced materials for EMI shielding10.1002/app.52974 ↗
4. Electromagnetic interference shielding materials: recent progress, structure design, and future perspective10.1039/D1TC04702G ↗
5. Materials for electromagnetic interference shielding10.1016/j.matchemphys.2020.123587 ↗
6. Review on shielding mechanism and structural design of electromagnetic interference shielding composites
7. Electromagnetic interference (EMI): measurement and reduction techniques
8. Schelkunoff · 1943
9. Review on shielding mechanism and structural design of electromagnetic interference shielding composites10.1002/mame.202100032 ↗
10. Recent advances in graphene-based films for electromagnetic interference shielding: Review and future prospects10.1016/j.carbon.2021.04.091 ↗
11. Ultrathin graphene: electrical properties and highly efficient electromagnetic interference shielding10.1039/C5TC01354B ↗
12. Ultrathin flexible graphene film: an excellent thermal conducting material with efficient EMI shielding10.1002/adfm.201400079 ↗
13. Graphene: status and prospects10.1126/science.1158877 ↗
14. Graphene and two-dimensional materials for silicon technology10.1038/s41586-019-1573-9 ↗
15. Heteroatom doping of 2D graphene materials for electromagnetic interference shielding: a review of recent progress10.1080/10408436.2021.1965954 ↗
16. Heteroatom doped graphene engineering for energy storage and conversion10.1016/j.mattod.2020.04.010 ↗
17. Heteroatom-doped graphene-based materials for sustainable energy applications: A review10.1016/j.rser.2021.110849 ↗
18. Review on recent progress in nitrogen-doped graphene: synthesis, characterization, and its potential applications10.1021/cs200652y ↗
19. Synergistic effect of Fe3O4 anchored N-doped rGO hybrid on mechanical, thermal and electromagnetic shielding properties of epoxy composites10.1016/j.compositesb.2019.02.036 ↗
20. Graphene and Fe2O3 filled composites for mitigation of electromagnetic pollution and protection of electronic appliances10.1016/j.compscitech.2023.110097 ↗
21. Acoustic green synthesis of graphene-gallium nanoparticles and PEDOT:PSS hybrid coating for textile to mitigate electromagnetic radiation pollution10.1021/acsanm.1c04425 ↗
22. Dielectric and electromagnetic interference shielding performance of graphene nanoplatelets and copper oxide nanoparticles reinforced polyvinylidenefluoride/poly(3,4-ethylenedioxythiophene)-block-poly(ethyleneglycol) blend nanocomposites10.1016/j.synthmet.2021.116923 ↗
23. Flexible aramid nanofiber/bacterial cellulose/graphene papers with nickel nanoparticles for enhanced electromagnetic interference shielding and joule heating performance10.1021/acsanm.2c00558 ↗
24. Nitrogen–sulfur co-doped reduced graphene oxide-nickel oxide nanoparticle composites for electromagnetic interference shielding10.1021/acsanm.9b01002 ↗
25. Fe3O4/graphene aerogels: A stable and efficient persulfate activator for the rapid degradation of malachite green10.1016/j.chemosphere.2020.126402 ↗
26. Facile synthesis of Fe3O4 nanoparticles decorated on 3D graphene aerogels as broad-spectrum sorbents for water treatment10.1016/j.apsusc.2016.02.019 ↗
27. 3D Fe3O4 nanoparticle/graphene aerogel for NO2 sensing at room temperature10.1039/C5RA14857J ↗
28. Enhanced catalytic oxidation of benzotriazole via peroxymonosulfate activated by CoFe2O4 supported onto nitrogen-doped three-dimensional graphene aerogels10.1016/j.cej.2020.125897 ↗
29. Nitrogen-doped graphene oxide aerogel anchored with spinel CoFe2O4 nanoparticles for rapid degradation of tetracycline10.1016/j.seppur.2020.116690 ↗
30. 3D Fe3O4-decorated nitrogen-doped graphene aerogel as a highly durable electrocatalyst for oxygen reduction reactions10.21926/cr.2202016 ↗
31. Recent advances in graphene aerogels as absorption-dominated electromagnetic interference shielding materials10.1016/j.carbon.2023.01.032 ↗
32. Synthesis of nanocomposites based on Fe3O4 nanoparticles and nitrogen-doped reduced graphene oxide aerogel by ex-situ approach and their magnetic properties10.1016/j.jallcom.2023.172038 ↗
33. The chemical and structural analysis of graphene oxide with different degrees of oxidation10.1016/j.carbon.2012.10.013 ↗
34. An improved Hummers method for eco-friendly synthesis of graphene oxide10.1016/j.carbon.2013.07.055 ↗
35. Nitrogen-doped graphene with high nitrogen level via a one-step hydrothermal reaction of graphene oxide with urea for superior capacitive energy storage10.1039/c2ra01367c ↗
36. Lightweight and flexible electrospun polymer nanofiber/metal nanoparticle hybrid membrane for high-performance electromagnetic interference shielding10.1038/s41427-018-0070-1 ↗
37. Review on shielding mechanism and structural design of electromagnetic interference shielding composites
38. Electromagnetic interference (EMI): measurement and reduction techniques
39. An effective metasurface-based linear and circular polarization converter for C- an X-band applications10.1016/j.optmat.2022.112355 ↗
40. X-Band RF photoinjector desing for the CompactLight project10.1016/j.nima.2021.165709 ↗
41. Desing and implementation of a Xband 9 GHz cavity magnetron for microwave applications10.1016/j.measurement.2022.111923 ↗
42. X-band polarimetric radar QPE for urban hydrology: The increased contribution of high-resolution rainfall capturing10.1016/j.jhydrol.2022.128905 ↗
43. Lightweight and flexible Ni-Co alloy nanoparticle-coated electrospun polymer nanofiber hybrid membranes for high-performance electromagnetic interference shielding10.1016/j.jallcom.2018.12.341 ↗
44. Development of highly flexible electromagnetic interference shielding composites for electronic applications using Cobalt/Hevea brasiliensis seed husk carbon dots/Bamboo microfibre-polyvinyl alcohol10.1016/j.indcrop.2022.115967 ↗
45. EMI shielding applications of PANI-Ferrite nanocomposite materials: A review10.1016/j.synthmet.2023.117338 ↗
46. High content silver/zinc oxide nanoparticle and cobalt nanowire in Caryota urens fibre-epoxy composites for enhanced microwave shielding10.1016/j.jmmm.2021.168118 ↗
47. Effect of carbon reinforcement on the EMI shielding response of LiFe5O8 ceramics10.1016/j.matchar.2022.111985 ↗
48. Multifunctional electromagnetic interference shielding films comprised of multilayered thermoplastic polyurethane membrane and silver nanowire10.1016/j.compositesa.2021.106472 ↗
49. Multilayer-structured Ni-Co-Fe-P/polyaniline/polyimide composite fabric for robust electromagnetic shielding with low reflection characteristic10.1016/j.cej.2019.122553 ↗
50. Lightweight and thermal insulation fabric-based composite foam for high-performance electromagnetic interference shielding10.1016/j.matchemphys.2023.127787 ↗
51. Synergistically-enhanced flexible electromagnetic interference shielding nanocomposites10.1016/j.apsusc.2023.157379 ↗
52. A novel high-performance supercapacitor based on high-quality CeO2/nitrogen-doped reduced graphene oxide nanocomposite10.1007/s00339-017-0817-5 ↗
53. Sonochemical synthesis of NiCo2O4/NRGO nanocomposite as a cathodic material for the electrochemical capacitor application10.1007/s13738-020-02084-w ↗
54. Characterization
55. Chemical methods for the production of graphenes10.1038/nnano.2009.58 ↗
56. Nitrogen-doped graphene with high nitrogen level via a one-step hydrothermal reaction of graphene oxide with urea for superior capacitive energy storage10.1039/c2ra01367c ↗
57. Designed nitrogen doping of few-layer graphene functionalized by selective oxygenic groups10.1186/1556-276X-9-646 ↗
58. Nitrogen-doped graphene-wrapped iron nanofragments for high-performance oxygen reduction electrocatalysts10.1007/s11051-017-3793-y ↗
59. Crystallographic analysis of graphite by X-ray diffraction10.3103/S1068364X17090058 ↗
60. X-ray diffraction in random layer lattices10.1103/PhysRev.59.693 ↗
61. Large-area growth of turbostratic graphene on Ni (111) via physical vapor deposition10.1038/srep19804 ↗
62. Gram-scale bottom-up flash graphene synthesis10.1038/s41586-020-1938-0 ↗
63. Comparative study of crystallite size using Williamson-Hall and Debye-Scherrer plots for ZnO nanoparticles
64. 3D hierarchical porous graphene aerogels for highly improved adsorption and recycled capacity10.1016/j.mseb.2014.12.026 ↗
65. DFT-based study on oxygen adsorption on defective graphene-supported Pt nanoparticles10.1021/jp205244m ↗
66. Effects of modified magnetite nanoparticles on bacterial cells and enzyme reactions10.3390/nano10081499 ↗
67. Understanding the hydrophilicity and water adsorption behavior of nanoporous nitrogen-doped carbons10.1021/acs.jpcc.6b06555 ↗
68. Porous materials for EMI shielding
69. Synthesis of Ti3C2/Fe3O4/PANI hierarchical architecture composite as an efficient wide-band electromagnetic absorber10.1016/j.apsusc.2019.03.049 ↗
70. Heterostructure design of 3D hydrangea-like Fe3O4/Fe7S8@C core-shell composite as a high-efficiency microwave absorber10.1016/j.carbon.2023.118043 ↗
71. Advances in preparation methods and conductivity properties of graphene-based polymer composites10.1007/s10443-023-10145-5 ↗
72. Facile preparation of lightweight microcellular polyetherimide/graphene composite foams for electromagnetic interference shielding10.1021/am303289m ↗
73. N-doped reduced graphene oxide/waterborne polyurethane composites prepared by in situ chemical reduction of graphene oxide10.1016/j.compositesa.2016.11.020 ↗
74. rGO reinforced Cu foam with enhanced mechanical and electromagnetic shielding properties10.1016/j.jmrt.2022.10.119 ↗
75. Anisotropic thermal conductivity and electromagnetic interference shielding of epoxy nanocomposites based on magnetic driving reduced graphene oxide@Fe3O410.1016/j.compscitech.2019.02.005 ↗
76. Synergistically improved thermal stability and electromagnetic interference shielding effectiveness (EMI SE) of in-situ synthesized polyaniline/sulphur doped reduced graphene oxide (PANI/S-RGO) nanocomposites10.1016/j.ceramint.2021.12.323 ↗