journal article·2024-03

Concentration-gradient of Li-rich Mn-based cathode materials with enhanced cycling retention

Lanlan Cheng, Wenyan Yang, Yifang Zhang, Wei Yang, Hanbo Zhou, Shengzhou Chen

Publisher page

Abstract

Lithium-rich layered Mn-based materials have attracted much attention because of their high specific capacity and high energy density, but they have the characteristics of irreversible capacity loss, low initial coulombic efficiency, and poor cycling performance. In this study, a core-shell structure, including Mn 0.75Ni 0.25C 2O 4 precursor as core and Li-rich Mn-based oxides (LRMO, Li 1.2Mn 0.54Ni 0.13Co 0.13O 2 ) as shell layer respectively, was synthesized by co-precipitation and sol-gel method. After sintering at high temperatures, the element concentration-gradient oxides material (LRMO-G) was formed. The material was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) and its electrochemical performance was investigated by various electrochemical methods. The LRMO-G material exhibits a high initial discharge specific capacity of 268 mAh/g at 0.1 C, and extremely superior capacity retention (95.4 %) after 100 cycles at 1 C. The initial coulomb efficiency of the LRMO-G material increases to 85 %, which is 12 % higher than that of LRMO.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Temperature-controlled synthesis of Li- and Mn-rich Li1.2Mn0.54Ni0.13Co0.13O2 hollow nano/sub-microsphere electrodes for high-performance lithium-ion battery10.1021/acsomega.9b02766 ↗
2. Pushing stoichiometries of lithium-rich layered oxides beyond their limits10.1021/acsaem.1c03396 ↗
3. Architecting "Li-rich Ni-rich" core-shell layered cathodes for high-energy Li-ion batteries
4. Nickel-rich and cobalt-free layered oxide cathode materials for lithium ion batteries
5. Bi/Bi3Se4 nanoparticles embedded in hollow porous carbon nanorod: high rate capability material for potassium-ion batteries10.1016/j.jechem.2023.02.050 ↗
6. Fundamental understanding and practical challenges of lithium-rich oxide cathode materials: layered and disordered-rocksalt structure
7. Review on comprehending and enhancing the initial coulombic efficiency of Li-rich Mn-based cathode materials in lithium-ion batteries10.1039/D3QM00064H ↗
8. High-capacity Li-rich Mn-based cathodes for lithium-ion batteries
9. Preparation of long-term cycling stable ni-rich concentration-gradient NCMA cathode materials for li-ion batteries10.1016/j.jcis.2023.02.064 ↗
10. Revealing the role of Mn/Li disordered mixing in Li-rich cathode Li2MnO3 by first-principles calculations
11. Boosting the electrochemical performance of Li-rich Mn-based cathode materials via oxygen vacancy and spinel phase integration10.1016/j.jcis.2023.06.050 ↗
12. Pseudo-bonding and electric-field harmony for Li-Rich Mn-based oxide cathode10.1002/adfm.202004302 ↗
13. A mechanistic insight into the oxygen redox of Li-rich layered cathodes and their related electronic/atomic behaviors upon cycling10.1002/adma.202211965 ↗
14. Depolarization of Li-rich Mn-based oxide via electrochemically active Prussian blue interface providing superior rate capability10.1002/cey2.272 ↗
15. Surface spinel-coated and polyanion-doped Co-free Li-rich layered oxide cathode for high-performance lithium-ion batteries10.1021/acs.iecr.1c04047 ↗
16. Facile synthesis of porous LiMn2O4 nano-cubes for ultra-stable lithium-ion battery cathodes10.1039/D2NJ06023J ↗
17. Fabricating multi-porous carbon anode with remarkable initial coulombic efficiency and enhanced rate capability for sodium-ion batteries10.1016/j.cclet.2022.04.041 ↗
18. Unique spindle-like bismuth-based composite toward ultrafast potassium storage10.1002/smll.202204045 ↗
19. Surface doping vs. bulk doping of cathode materials for lithium-ion batteries: a review10.1007/s41918-022-00155-5 ↗
20. Influences of direction and magnitude of Mg2+ doping concentration gradient on the performance of full concentration gradient cathode material10.1007/s10008-021-04984-0 ↗
21. Developments in surface/interface engineering of Ni-rich layered cathode materials10.1002/tcr.202200119 ↗
22. Extensive comparison of doping and coating strategies for Ni-rich positive electrode materials10.1016/j.jpowsour.2022.231633 ↗
23. Enhancing surface stability of LiNi0.8Co0.1Mn0.1O2 cathode with hybrid core-shell nanostructure induced by high-valent titanium ions for Li-ion batteries at high cut-off voltage10.1016/j.jallcom.2020.155099 ↗
24. High-voltage, high-energy layered-spinel composite cathodes with superior cycle life for lithium-ion batteries10.1021/cm2034992 ↗
25. Stable layered-layered-spinel structure of the Li1.2Ni0.13Co0.13Mn0.54O2 cathode synthesized by ball-milling assisted solid-state method10.1016/j.jelechem.2022.116050 ↗
26. A Facile Li2TiO3 surface modification to improve the structure stability and electrochemical performance of full concentration gradient Li-rich oxides
27. J. Low-strain binary hexacyanoferrate nanocuboids with concentration-gradient structure towards fast and durable energy storage10.1016/j.jechem.2022.07.002 ↗
28. Improved electrochemical performance of P2-type concentration-gradient cathode material Na0.65Ni0.16Co0.14Mn0.7O2 with Mn-rich core for sodium-ion batteries10.1016/j.jallcom.2023.170386 ↗
29. Synthesis and electrochemical characterizations of concentration-gradient structure nickel-rich cathode materials10.20964/2022.11.87 ↗
30. Gradient Li-rich oxide cathode particles immunized against oxygen release by a molten salt treatment10.1038/s41560-019-0508-x ↗
31. Outstanding electrochemical performance of Ni-rich concentration-gradient cathode material LiNi0.9Co0.083Mn0.017O2 for lithium-ion batteries10.3390/molecules28083347 ↗
32. Comparisons of analytical approaches for determining shell thicknesses of core-shell nanoparticles by X-ray Photoelectron spectroscopy10.1021/acs.jpcc.7b12070 ↗
33. Tuning anionic redox activity and reversibility for a high-capacity Li-Rich Mn-based oxide cathode via an integrated strategy10.1002/adfm.201806706 ↗
34. Regulate the lattice oxygen activity and structural stability of lithium-rich layered oxides by integrated strategies10.1016/j.cej.2022.135677 ↗
35. Modification strategy for constructing Li gradient combined with spinel phase coating on Li-rich Mn-based materials10.1021/acsaem.2c00076 ↗
36. Cycling-driven electrochemical activation of Li-rich NMC positive electrodes for Li-ion batteries10.1021/acsaem.2c01239 ↗
37. Oxygen loss in layered oxide cathodes for Li-ion batteries: mechanisms, effects, and mitigation10.1021/acs.chemrev.1c00327 ↗
38. Coupling structural evolution and oxygen-redox electrochemistry in layered transition metal oxides10.1038/s41563-022-01209-1 ↗
39. High-voltage electrochemical properties of lithium-rich spinel oxides10.1021/acs.jpcc.3c01184 ↗