Effect of interface bonding and properties of graphite/copper composites by microwave pressure sintering
Source abstract
Abstract
The graphite/copper composites were prepared by different sintering processes. The effects of conventional sintering, microwave sintering, and microwave pressure sintering on the structure and properties of the composites was investigated. The results demonstrate that the microwave electromagnetic field can promote interfacial bonding of graphite and copper matrices, and pressure sintering may further promote interfacial bonding of the copper matrix and grain refinement, thereby improving the overall application performance of the composites. At a sintering temperature of 950 ℃, a holding time of 1 h, and a graphite volume fraction of 50 vol%, the physical and mechanical properties of the composites prepared by microwave pressure sintering were optimal when the pressure was 350 kPa. The internal thermal conductivity of the cross plane was 681.0 (W·m −1·K −1 ), the tensile strength was 32.57 MPa, and the elongation at break was 18.46%. It is proved that microwave pressure sintering is beneficial to improve the comprehensive properties of composites, and provides a new research idea for the preparation of graphite/copper composites with high thermal conductivity.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. New considerations for 5G wireless systems [from the guest editors10.1109/MVT.2018.2813532 ↗
2. Algorithmic TCAMs: implementing packet classification algorithms in hardware10.1109/MCOM.001.2100923 ↗
3. Algorithmic TCAMs: implementing packet classification algorithms in hardware10.1109/MCOM.001.2100923 ↗
4. User-centric computation offloading for edge computing10.1109/JIOT.2021.3057694 ↗
5. A review of the thermal conductivity of silver-epoxy nanocomposites as encapsulation material for packaging applications10.1016/j.cej.2022.137319 ↗
6. Advances on thermally conductive epoxy-based composites as electronic packaging underfill materials-a review
7. Present and future thermal interface materials for electronic devices10.1080/09506608.2017.1296605 ↗
8. A Self-generated Chemotaxis-inspired routing method for digital microfluidic cooling of hotspots in integrated circuits10.1016/j.enconman.2022.115808 ↗
9. Why is coordination chemistry stretching the limits of micro-electronics technology?10.1016/S0010-8545(98)00087-3 ↗
10. Recovery of epoxy thermosets and their composites10.1016/j.mattod.2022.12.005 ↗
11. Synergistic effects of tungsten coating on the microstructure, thermophysical and mechanical properties of graphite flakes reinforced copper matrix composites10.1016/j.jallcom.2022.165318 ↗
12. Effects of shape and alignment of reinforcing graphite phases on the thermal conductivity and the coefficient of thermal expansion of graphite/copper composites10.1016/j.carbon.2019.04.055 ↗
13. Copper–graphite–copper sandwich: superior heat spreader with excellent heat-dissipation ability and good weldability10.1039/C6RA00057F ↗
14. Effect of copper content on the properties of graphite-copper composites formed using the plasma spray process10.1016/j.surfcoat.2019.03.009 ↗
15. New electromagnetic wave shielding effectiveness at microwave frequency of polyvinyl chloride reinforced graphite/copper nanoparticles10.1016/j.compositesa.2010.08.006 ↗
16. Tribological behaviour of graphite/graphite and graphite/copper couples in sliding electrical contact: influence on the contact electric field on the surface passivation
17. Friction stir soldering: A novel route to produce graphite-copper dissimilar joints10.1016/j.matdes.2016.12.057 ↗
18. Effect of volume fraction and unidirectional orientation controlled graphite on thermal properties of graphite/copper composites10.1016/j.compositesb.2019.107735 ↗
19. Fabrication of graphite/Cu composite foils with ultrahigh thermal conductivity by adding an intermediate nickel layer and vacuum hot pressing treatment10.1016/j.jallcom.2021.161228 ↗
20. Effect of matrix-alloying-element chromium on the microstructure and properties of graphite flakes/copper composites fabricated by hot pressing sintering10.1016/j.carbon.2017.11.033 ↗
21. Interface structure and strengthening behavior of graphene/CuCr composites10.1016/j.carbon.2018.03.018 ↗
22. Interface design of graphene/copper composites by matrix alloying with titanium10.1016/j.matdes.2018.02.038 ↗
23. Microwave resonant sintering of powder metals10.1016/j.scriptamat.2018.02.014 ↗
24. Microstructure and enhanced volume density properties of FeMn78C8.0 alloy prepared via a cleaner microwave sintering approach10.1016/j.jclepro.2020.121364 ↗
25. Rapid microwave sintering of carbon nanotube-filled AZ61 magnesium alloy composites10.1016/j.compositesb.2016.03.041 ↗
26. Effect of microwave-activated sintering on microstructure and properties of graphite/copper composites10.1021/acsaelm.1c00188 ↗
27. Fabrication of high-performance proton-conducting electrolytes from microwave prepared ultrafine powders for solid oxide fuel cells10.1016/j.jpowsour.2018.11.051 ↗
28. A comparative study of structural and mechanical properties of Al–Cu composites prepared by vacuum and microwave sintering techniques10.1016/j.jmrt.2017.10.003 ↗
29. Study on the microwave sintering of the novel Mo–W–Cu alloys10.1016/j.jallcom.2021.160584 ↗
30. Rapid densification of additive manufactured magnesium alloys via microwave sintering
31. Incremental metal-powder solidification by localized microwave-heating and its potential for additive manufacturing
32. An investigation on tribological and electrical behaviour of conventional and microwave processed copper-graphite composites10.1088/2053-1591/ab1027 ↗
33. Microwave sintering of copper–graphite composites10.1016/j.jmatprotec.2009.05.017 ↗
34. Processing of copper–carbon nanotube composites by vacuum hot pressing technique10.1016/j.msea.2012.09.080 ↗
35. Fabrication of graphite film/aluminum composites by vacuum hot pressing: process optimization and thermal conductivity10.1016/j.compositesb.2016.09.051 ↗
36. Investigation of synthesized nanosized copper by polyol technique with graphite powder10.1016/j.apt.2016.03.011 ↗
37. Effect of the microstructure and properties of graphite/copper composites fabricated by microwave sintering10.1007/s10853-021-05891-5 ↗
38. Fabrication of tungsten–copper alloys by microwave hot pressing sintering10.1016/j.jallcom.2015.10.186 ↗
39. Microwave flash sintering of metal powders: From experimental evidence to multiphysics simulation10.1016/j.actamat.2018.01.017 ↗
40. Sintering force behind the viscous sintering of two particles10.1016/j.actamat.2016.03.006 ↗
41. Fabrication, mechanical and thermal properties of copper coated graphite films reinforced copper matrix laminated composites via ultrasonic-assisted electroless plating and vacuum hot-pressing sintering10.1016/j.msea.2021.141768 ↗
42. Structure-property correlation in Al–Zn–Mg alloy cast developed through in-situ microwave casting10.1016/j.msea.2017.02.021 ↗
43. Rapid in-situ reaction synthesis of novel TiC and carbon nanotubes reinforced titanium matrix composites10.1016/j.jmst.2017.07.005 ↗
44. Tensile and fracture toughness behaviour of ultrafine grained Mg-4Zn-4Gd alloy processed through hot rolling followed by hot pressing10.1016/j.msea.2018.10.117 ↗
45. Microstructure evolution and mechanical property strengthening mechanisms of Cu/Cu NPs/Cu joint fabricated by ultrasonic spot welding10.1016/j.msea.2023.144656 ↗
46. Cross property connection between the electric and the thermal conductivities of copper graphite composites10.1016/j.ijengsci.2019.103130 ↗