Electrodeposited large-area nickel-alloy electrocatalysts for alkaline hydrogen evolution under industrially relevant conditions
Source abstract
Abstract
Developing efficient water splitting electrocatalysts plays a critical role in lowering the energy cost for hydrogen production, which requires accurate evaluation of the catalytic performance especially under industrially relevant conditions. In this work, we design a two-chamber electrolyzer testing system simulating practical water electrolyzer system to enable catalytic performance evaluation under industrially relevant conditions. A one-step electrodeposition method is used to synthesize binary and ternary Ni alloy HER catalysts and the catalytic electrodes are screened and optimized with the two-chamber electrolyzer testing system. A voltage of 1.64 V without iR compensation at a current density of 200 mA/cm 2 is obtained with continuous operation for 70 h. Different HER activity trend is observed from conventional three-electrode experiments with low-concentration alkaline electrolytes at room temperature and the two-chamber electrolyzer measurements, further supporting the importance of catalytic performance evaluation under industrially relevant conditions. The electrodeposition synthesis method is further used to prepare large-area catalytic electrodes over 400 cm 2 with good uniformity.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Advanced battery technologies research · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. One step fabrication of nanostructured nickel thin films on porous nickel foam for drastic electrocatalytic oxygen evolution10.1016/j.ijhydene.2023.01.083 ↗
2. A short review on generation of green fuel hydrogen through water splitting10.1016/j.ijhydene.2022.09.264 ↗
3. Advanced electrocatalysis for energy and environmental sustainability via water and nitrogen reactions10.1002/adma.202170042 ↗
4. Facile in-situ deposition of Pt nanoparticles on nano-pore stainless steel composite electrodes for high active hydrogen evolution reaction10.1016/j.ijhydene.2021.05.130 ↗
5. H2 generation from alkaline electrolyzer10.1002/wene.150 ↗
6. Recent advances in non-precious Ni-based promising catalysts for water splitting application10.1002/er.8458 ↗
7. Bimetal-organic framework-derived nanorod-like FexNi1-x@C, P composites for electrochemical hydrogen evolution10.1016/j.jallcom.2022.167511 ↗
8. Interface-induced electron transfer in sandwich-like hierarchical hollow CoP@NC hybrid for boosted hydrogen evolution reaction in alkaline electrolyte10.1016/j.jallcom.2023.170315 ↗
9. Recent advances in transition metal nitrides for hydrogen electrocatalysis in alkaline media: from catalyst design to application10.3389/fchem.2022.1073175 ↗
10. Charge transfer of interfacial catalysts for hydrogen energy10.1021/acsmaterialslett.2c00143 ↗
11. Nanoscale heterogeneous FeB metallic glass as highly active and stable catalyst for hydrogen evolution10.1016/j.jallcom.2023.170964 ↗
12. A mini review on nickel-based electrocatalysts for alkaline hydrogen evolution reaction10.1007/s12274-015-0965-x ↗
13. One-step potentiostatic electrodeposition of Ni-Se-Mo film on Ni foam for alkaline hydrogen evolution reaction10.1016/j.ijhydene.2019.12.163 ↗
14. Geometric and electronic modulation of fcc NiCo alloy by group-Ⅵ B metal doping to accelerate hydrogen evolution reaction in acidic and alkaline media10.1016/j.cej.2021.133110 ↗
15. Boosting electrocatalytic hydrogen generation by a renewable porous wood membrane decorated with Fe-doped NiP alloys10.1016/j.jechem.2020.07.037 ↗
16. Direct-current electrodeposition of Ni-S-Fe alloy for hydrogen evolution reaction in alkaline solution10.1016/j.ijhydene.2017.12.015 ↗
17. Mo-Doped NiCu as an efficient and stable electrocatalyst for the hydrogen evolution reaction10.1039/C9NJ01263J ↗
18. Deposit amorphous Ni-Co-B-RE (RE = Ce, Gd and Nd) on nickel foam as a high performance and durable electrode for hydrogen evolution reaction10.1016/j.jelechem.2020.114552 ↗
19. A novel Ni–La-Nd-Y flim on Ni foam to enhance hydrogen evolution reaction in alkaline media10.1016/j.ijhydene.2022.01.123 ↗
20. One–step electrodeposition of Ni–Ce–Pr–Ho/NF as an efficient electrocatalyst for hydrogen evolution reaction in alkaline medium10.1016/j.energy.2022.123831 ↗
21. One-step etectrodeposition of a hierarchically structured S-doped NiCo film as a highly-efficient electrocatalyst for the hydrogen evolution reaction.10.1039/C8NR03944E ↗
22. Phosphorus doped nickel-molybdenum aerogel for efficient overall water splitting10.1016/j.apcatb.2021.120494 ↗
23. One-step fabrication of amorphous Ni-Fe phosphated alloys as efficient bifunctional electrocatalysts for overall water splitting10.1016/j.jnoncrysol.2022.121598 ↗
24. Recent advances in design of electrocatalysts for high-current-density water splitting10.1002/adma.202108133 ↗
25. Electrocatalysis as the nexus for sustainable renewable energy: the Gordian knot of activity, stability, and selectivity10.1002/anie.202007672 ↗
26. Handily etching nickel foams into catalyst-substrate fusion self-stabilized electrodes toward industrial-level water electrolysis
27. Critical current density as a performance indicator for gas-evolving electrochemical devices
28. A durable and efficient electrocatalyst for saline water splitting with current density exceeding 2000 mA cm−210.1002/adfm.202010367 ↗
29. Electrodeposition of hierarchically structured three-dimensional nickel-iron electrodes for efficient oxygen evolution at high current densities10.1038/ncomms7616 ↗
30. Electrodeposition and characterization of Ni-Mo alloy as an electrocatalyst for alkaline water electrolysis10.1016/j.jelechem.2017.05.002 ↗
31. Interface catalysis of nickel molybdenum (NiMo) alloys on two-dimensional (2D) MXene for enhanced hydrogen electrochemistry10.1021/acs.jpclett.1c02676 ↗
32. Superaerophobic ultrathin Ni-Mo alloy nanosheet array from in situ topotactic reduction for hydrogen evolution reaction10.1002/smll.201701648 ↗
33. Electrolytic synthesis and characterization of electrocatalytic Ni-W alloy10.1007/s11665-015-1710-z ↗
34. An earth-abundant tungsten-nickel alloy electrocatalyst for superior hydrogen evolution10.1021/acsanm.7b00383 ↗
35. Electrocatalytic properties of Fe–R (R=rare earth metal) crystalline alloys as hydrogen electrodes in alkaline water electrolysis10.1016/j.jallcom.2005.03.075 ↗
36. Superhydrophilic and superaerophobic Ni–Mo alloy grown on 3D Ni foam with heterogeneous structure as self-standing electrocatalysts toward efficient alkaline HER10.1016/j.solidstatesciences.2022.107089 ↗
37. NiMo-MOF-derived carbon-armored Ni4Mo alloy of an interwoven nanosheet structure as an outstanding pH-universal catalyst for hydrogen evolution reaction at high current densities10.1021/acsami.3c01061 ↗
38. Effect of deposition conditions on the properties of Ni-Mo-W coatings as electrocatalysts for hydrogen evolution reaction10.1007/s10800-021-01615-4 ↗
39. Regulating intrinsic electronic structures of transition-metal-based catalysts and the potential applications for electrocatalytic water splitting10.1021/acsmaterialslett.0c00549 ↗
40. Tweaking the composition of NiMoZn alloy electrocatalyst for enhanced hydrogen evolution reaction performance10.1016/j.nanoen.2014.12.007 ↗
41. Zero gap alkaline electrolysis cell design for renewable energy storage as hydrogen gas10.1039/C6RA22242K ↗
42. Role of molybdenum in Ni-MoO2 catalysts supported on reduced graphene oxide for temperature dependent hydrogen evolution reaction10.1016/j.jssc.2018.06.005 ↗
43. A hierarchically-assembled Fe-MoS2/Ni3S2/nickel foam electrocatalyst for efficient water splitting10.1039/C9DT02201E ↗
44. Recent advances and future prospects on industrial catalysts for green hydrogen production in alkaline media