journal article·2024-01

M23C6-assisted formation mechanism of grain boundary cellular structure and its role on the brittle fracture in an austenitic Fe-Mn-Al-C lightweight alloy

Dongwon Lee, Gun-Young Yoon, Seong-Jun Park, Jae Sang Lee, Yoon-Uk Heo

Publisher page

Abstract

The austenitic Fe-Mn-Al-C lightweight alloy is limited using its full-hardened state due to its brittleness after long-term aging treatment. This study investigates the formation mechanism of grain boundary precipitates and their effect on crack initiation and propagation. The alloy showed typical age-hardening behavior but exhibited intergranular fracture after a critical aging time. TEM study revealed that the amount of Mn segregation increased and Al decreased at the grain boundary at the early aging stage. M 23C 6 is first formed at the grain boundary, and α-ferrite is formed at the coherent M 23C 6 /γ interface. Finally, the grain boundary cellular structure of α-ferrite+κ-carbide is formed by the continuous formation of α + κ and growing into their incoherent interfaces with γ. As this cellular structure decorates the grain boundaries, the fracture type changed from ductile to intergranular brittle fracture. The grain boundary cracks initiated at the coarse grain boundary κ-carbide and propagated through the {100} planes of α and κ. The lowest theoretical cohesive strengths in the {100} planes of both phases are suggested as the origin of the crack initiation and propagation.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Study of Fe-Mn-Al austenitic steel
2. Microstructure and mechanical properties of ductile Ni3AI-type compound in Fe-(Ni, Mn)-AI-C systems rapidly quenched from melts10.1007/BF02642338 ↗
3. Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels10.1016/j.actamat.2015.08.027 ↗
4. Hierarchical microstructure design of a bimodal grained twinning-induced plasticity steel with excellent cryogenic mechanical properties10.1016/j.actamat.2018.06.019 ↗
5. Low density Fe–Mn–Al–C steels: phase structures, mechanisms and properties10.2355/isijinternational.ISIJINT-2020-467 ↗
6. Composition and temperature dependence of tensile properties of austenitic Fe-Mn-Al-C alloys10.1016/0921-5093(89)90844-7 ↗
7. Mechanical properties of Fe-30Mn-10Al-1C–1Si alloy10.1016/0921-5093(89)90095-6 ↗
8. Low temperature mechanical properties of Fe-28Mn-5Al-1C alloy10.1016/0921-5093(92)90195-7 ↗
9. Microstructure control and ductility improvement of the two-phase γ-Fe/κ-(Fe, Mn) 3AlC alloys in the Fe–Mn–Al–C quaternary system10.1016/j.intermet.2004.03.010 ↗
10. Microstructures and mechanical properties of high‐strength Fe‐Mn‐Al‐C lightweight TRIPLEX steels10.1002/srin.200606440 ↗
11. High-strength Fe–20Mn–Al–C-based alloys with low density10.2355/isijinternational.50.893 ↗
12. Dynamic fracture toughness of high strength cast steels
13. Tensile deformation of low-density Fe–Mn–Al–C austenitic steels at ambient temperature10.1016/j.scriptamat.2012.09.031 ↗
14. Effect of aging on the microstructure and deformation behavior of austenite base lightweight Fe–28Mn–9Al–0.8C steel10.1016/j.scriptamat.2010.07.036 ↗
15. Control of inter/intra-granular κ-carbides and its influence on overall mechanical properties of a Fe-11Mn-10Al-1.25C low density steel10.1016/j.msea.2017.12.102 ↗
16. Aging hardening and precipitation behavior of Fe-31.6 Mn-8.8 Al-1.38C austenitic cast steel10.1016/j.vacuum.2020.109662 ↗
17. γ decomposition in Fe–Mn–Al–C lightweight steels10.1016/j.jmrt.2020.02.088 ↗
18. Influence of inter/intra-granular κ-carbides on the deformation mechanism in lightweight Fe-20Mn-11.5 Al-1.2C steel10.1016/j.matchar.2020.110142 ↗
19. Effect of aging isothermal time on the microstructure and room-temperature impact toughness of Fe–24.8 Mn–7.3 Al–1.2C austenitic steel with κ-carbides precipitation10.1007/s12540-018-0112-9 ↗
20. The effect of Mn and Al contents on the solvus of κ phase in austenitic Fe-Mn-Al-C alloys10.1016/S0254-0584(99)00026-7 ↗
21. Partitioning of C into κ-carbides by Si addition and its effect on the initial deformation mechanism of Fe-Mn-Al-C lightweight steels10.1016/j.jallcom.2018.10.104 ↗
22. Aken, A literature review of age hardening Fe-Mn-Al-C alloys
24. Low-density steels10.1007/s11837-014-1137-2 ↗
25. Discontinuous (cellular) precipitation10.1023/A:1006510228181 ↗
26. Microband-induced plasticity in a high Mn–Al–C light steel10.1016/j.msea.2008.05.042 ↗
27. Thermo-Calc & DICTRA, computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
28. Visualization and analysis of crystal structures using CrystalMaker software10.1515/zkri-2015-1869 ↗
29. Norm-conserving and ultrasoft pseudopotentials for first-row and transition elements10.1088/0953-8984/6/40/015 ↗
30. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
31. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
32. Correlation of the M23C6 precipitation morphology with grain boundary characteristics in austenitic stainless steel10.1016/S0921-5093(01)01254-0 ↗
33. Determination of core structure periodicity and point defect density along dislocations
34. On the eutectoid reaction in a quaternary Fe-C-Mn-Al alloy: austenite → ferrite+ kappa-carbide+ M23C6 carbide10.1007/s11661-013-2083-2 ↗
35. Misorientation effects on discontinuous precipitation in Al–Ag–Ga10.1016/S1359-6454(98)00061-5 ↗
36. Interphase boundary structure with irrational orientation relationship formed in grain boundary precipitation10.1007/s11661-002-0356-2 ↗
37. The shape and mechanism of formation of M23C6 carbide in austenite10.1016/0001-6160(67)90159-9 ↗
38. The observation of the structure of M23C6/γ coherent interface in the 100Mn13 high carbon high manganese steel10.1007/s11661-017-4462-6 ↗
39. The crystallography of M23C6 carbides in a martensitic 9% Cr steel after tempering, aging and creep10.1080/14786435.2013.765995 ↗
40. Evaluation of the effects of segregation on austenite grain boundary energy in Fe-C-X alloys10.1007/BF02645149 ↗
41. First-principles analysis of the grain boundary segregation of transition metal alloying elements in γFe10.1016/j.commatsci.2021.111050 ↗
42. First-principles analysis of the grain boundary segregation of transition metal alloying elements in γFe10.1016/j.commatsci.2021.111050 ↗
43. Interfacial segregation and grain boundary embrittlement: an overview and critical assessment of experimental data and calculated results10.1016/j.pmatsci.2016.11.001 ↗
44. Effects of aluminum content on cracking phenomenon occurring during cold rolling of three ferrite-based lightweight steel10.1016/j.actamat.2013.06.004 ↗
45. Fracture and strength of solids10.1088/0034-4885/12/1/309 ↗
46. Extended Hall–Petch relationships for yield, cleavage and intergranular fracture strengths of bcc steel and its deformation and fracture behaviors10.1007/s12540-018-0026-6 ↗
47. Physical and mechanical properties of iron-aluminium-(Mn, Si) lightweight steels10.1051/metal:2000110 ↗
48. P. The Materials, Materials Data on AlFe3C by Materials Project, United States, 2020. 〈https://next-gen.materialsproject.org/materials/mp-22793/〉.
49. Commentary: the materials project: a materials genome approach to accelerating materials innovation10.1063/1.4812323 ↗
50. Effect of hydrogen on the surface energy of ferrite and austenite10.1016/j.corsci.2013.07.043 ↗
51. Brittle-fracture simulations of curved cleavage cracks in α-iron: a molecular dynamics study10.1063/5.0026659 ↗
52. Transgranular cracking in a liquid Zn embrittled high strength steel10.1016/j.scriptamat.2019.09.006 ↗
53. High strain-rate crack growth in rate-dependent plastic solids10.1016/0022-5096(85)90029-8 ↗
54. A theory of the fracture of metals10.1080/00018735700101406 ↗
55. Extended Hall–Petch relationships for yield, cleavage and intergranular fracture strengths of BCC steel and its deformation and fracture behaviors10.1007/s12540-018-0026-6 ↗