journal article·2024-01

Evolution of cold-expanded microstructure with aging temperature and its influence on fatigue performance of hole structure at elevated temperature

Bo Yu, Chunling Xu, Xin Wang, Xuekun Luo, Yuanxing Gu, Dianyin Hu, Haizhong Zheng, Zhihui Tang

Publisher page

Abstract

A surface-strengthened layer formed by cold expansion (CX) evolves at high temperatures. The evolution of surface integrity and microstructure after a CX-treated superalloy GH4169 center hole plate was investigated in the present study. Aging at 400 ℃ and 600 ℃ took place with a duration of 500 h (CX400 and CX600). In addition, the fatigue properties at 820 MPa/600 ℃/R= 0.1 were investigated. The results show that CX has a smooth surface, a compressive residual stress field with a depth of more than 1.4 mm and a non-improved surface hardness. The statistical fatigue life of the as-received specimens was 7015 cycles, and the fatigue lives after CX and CX400 treatment were 5.27 and 2.86 times higher, respectively, indicating an increase by CX and a decrease by 400 ℃ aging. In contrast, the fatigue life of the original sample decreased to 5576 cycles with 600 ℃ aging, while the corresponding fatigue life of the CX600-treated sample was 7979 cycles, representing a significant decrease in both cases. The transformation of the main strengthening γ″ phase to the δ-phase upon aging at 600 ℃/500 h are the main reasons for the weakening of the fatigue properties, which did not occur upon aging at 400 ℃ (see TEM).
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Treatment and Residual Stress · High Temperature Alloys and Creep · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Fatigue and creep-fatigue crack growth in aviation turbine disk simulation models under variable amplitude loading10.1016/j.engfailanal.2021.105886 ↗
2. Mixed-mode crack growth simulation in aviation engine compressor disk10.1016/j.engfracmech.2021.107617 ↗
3. Mechanism for superior fatigue performance of warm laser shock peened IN718 superalloy after high-temperature ageing10.1016/j.jallcom.2022.166340 ↗
4. Influence of pre-tightening force of bolt connection on fatigue life performance of structure
5. Fretting fatigue and wear in bolted connections: a multi-level formulation for the computation of local contact stresses10.1016/j.triboint.2009.03.007 ↗
6. Research progress of anti-fatigue surface strengthening technology for load-bearing hole structure
7. Three-dimensional fatigue crack growth simulation of the center hole in turbine disk
8. Mechanism investigation on fatigue failure in threaded hole of the main bearing in high-strength diesel engine10.1016/j.engfailanal.2022.106921 ↗
9. A combined critical distance and highly-stressed-volume model to evaluate the statistical size effect of the stress concentrator on low cycle fatigue of TA19 plate10.1016/j.ijfatigue.2016.10.003 ↗
10. Experimental and analytical investigation for fatigue crack growth characteristics of an aero-engine fan disc10.1016/j.ijfatigue.2021.106252 ↗
11. Prediction of crack growth from bolt holes in a disc10.1016/S0142-1123(99)00122-X ↗
12. Structural optimization of uniaxial symmetry non-circular bolt clearance hole on turbine disk10.1016/j.cja.2014.03.026 ↗
13. Structural design and optimization for vent holes of an industrial turbine sealing disk10.1016/j.cja.2020.07.010 ↗
14. Improvement of traction-traction fatigue properties of A100 steel plate-hole-structure by double shot peening10.1016/j.ijfatigue.2022.106925 ↗
15. In-situ warm shot peening on Ti-6Al-4V alloy: effects of temperature on fatigue life, residual stress, microstructure and mechanical properties
16. Effect of split sleeve cold expansion on microstructure and fatigue performance of 7075-T6 aluminum alloy holes10.1016/j.ijfatigue.2022.107339 ↗
17. A novel non-contacting single-coil electromagnetic hole expansion process to improve the fatigue performance of hole component10.1016/j.ijfatigue.2022.106924 ↗
18. A dynamic cold expansion method to improve fatigue performance of holed structures based on electromagnetic load
19. Effect of hole cold expansion on fatigue performance of corroded 7B04-T6 aluminum alloy10.1016/j.ijfatigue.2019.05.008 ↗
20. Fatigue performance improvement of laser shock peened hole on powder metallurgy Ni-based superalloy labyrinth disc10.1016/j.surfcoat.2021.126829 ↗
21. Experimental and numerical investigations on the influence of cold expansion on low cycle fatigue life of bolt holes in aeroengine superalloy disk at elevated temperature10.1016/j.ijfatigue.2019.105390 ↗
22. Effect of cold expansion on high-temperature low-cycle fatigue performance of the nickel-based superalloy hole structure10.1016/j.ijfatigue.2021.106377 ↗
23. Literature review of fatigue assessment methods in residual stressed state10.1016/j.engfailanal.2020.104379 ↗
24. Effect of pretreatment process on microstructure and mechanical properties in Inconel 718 alloy10.1016/j.jallcom.2023.168707 ↗
25. Huang · 2000
26. Effect of aging temperature on the fatigue properties of shot-peened single crystal superalloy at intermediate temperature10.1016/j.ijfatigue.2021.106675 ↗
27. Effect of ultrasonic shot peening on surface integrity and fatigue performance of single-crystal superalloy10.1016/j.jmatprotec.2021.117209 ↗
28. Surface characteristics and microstructure evolution of a nickel-base single crystal superalloy treated by ultrasonic shot peening10.1016/j.jallcom.2022.165761 ↗
29. Modeling of the shot peening of a nickel alloy with the consideration of both residual stresses and work hardening10.1016/j.ijsolstr.2023.112120 ↗
30. Thermal stability of nanostructured uranium within a surface layer processed using shot peening10.1016/j.surfcoat.2022.128983 ↗
31. Crystal plasticity modelling of stability of residual stresses induced by shot peening10.1016/j.ijmecsci.2022.107526 ↗
32. Thermal stress relaxation in shot peened and laser peened nickel-based superalloy10.1016/j.jmst.2020.03.059 ↗
33. Effect of split sleeve cold expansion on cracking behaviors of titanium alloy TC4 holes10.1016/j.engfracmech.2012.04.008 ↗
34. Split sleeve cold expansion of AZ31B sheet: Microstructure, texture and residual stress10.1016/j.matdes.2019.108213 ↗
35. The effects of the cold expansion degree on the fatigue crack growth rate in rail steel10.1016/j.ijfatigue.2022.107130 ↗
36. Finite element method and experimental investigation on the residual stress fields and fatigue performance of cold expansion hole10.1016/j.matdes.2009.09.031 ↗
37. Investigation on fatigue performance of cold expansion holes of 6061-T6 aluminum alloy10.1016/j.ijfatigue.2016.10.030 ↗
38. Surface characteristics and fatigue behavior of shot peened Inconel 71810.1016/j.ijfatigue.2018.01.005 ↗
39. Stability of shot peen residual stresses in IN100 subjected to creep and fatigue loading10.1016/j.proeng.2010.03.203 ↗
40. Microstructure and tensile properties of IN718 superalloy aged with temperature/stress coupled field10.1016/j.jmrt.2023.02.124 ↗
41. The effect of heterogeneous precipitation behavior on the mechanical properties of IN718 superalloy after laser shock peening and heat treatment processes10.1016/j.jmapro.2023.05.069 ↗
42. Thermal evolutions of residual stress and strain hardening of GH4169 Ni-based superalloy treated by laser shock peening10.1016/j.surfcoat.2023.129690 ↗
43. Process-performance-prediction integration for fatigue life improvement technologies: An implementation in cold expansion of hole structures10.1016/j.ijfatigue.2023.107507 ↗