Improving wear and corrosion resistance of LDEDed CrFeNi MEA through addition of B and Si
Source abstract
Abstract
In this paper, a novel CrFeNiB 0.03Si 0.03 medium entropy alloy (MEA) coating was developed by utilizing Ni-base alloy powder NiBSi in place of pure Ni powder through laser direct energy deposition (LDED) technology. The study explores the improvement of wear and corrosion resistance of CrFeNi MEA coatings by incorporating B and Si elements. The results show that the addition of B element generates Cr and Fe boride phases, while Si element solidly dissolves in FCC phase. Compared to CrFeNi MEA, CrFeNiB 0.03Si 0.03 MEA exhibits doubled microhardness reaching 403 HV 0.2 and a reduced wear rate by 40 %, attributed to fine microstructure and solid solution strengthening of Si. The corrosion resistance of CrFeNiB 0.03Si 0.03 is also improved compared to CrFeNi, which is due to the formation of more Cr 2O 3 in the corrosion layer and the formation of SiO 2 network, which prevents cracks and holes in the embroidery layer and makes the corrosion layer denser.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
2. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
3. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
4. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
5. Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off10.1038/nature17981 ↗
6. Overcoming the strength-ductility trade-off via the formation of nanoscale Cr-rich precipitates in an ultrafine-grained FCC CrFeNi medium entropy alloy matrix10.1016/j.msea.2019.138107 ↗
7. Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys10.1016/j.intermet.2013.10.024 ↗
8. Effects of temperature on mechanical properties and deformation mechanisms of the equiatomic CrFeNi medium-entropy alloy10.1016/j.actamat.2020.11.012 ↗
9. Significantly enhanced wear resistance of an ultrafine-grained CrFeNi medium-entropy alloy at elevated temperatures10.1007/s11661-020-05755-8 ↗
10. Microstructure and mechanical properties of novel Si-added CrFeNi medium-entropy alloy prepared via vacuum arc-melting10.1016/j.jallcom.2022.164136 ↗
11. Effects of titanium addition on microstructure and mechanical properties of CrFeNiTix (x = 0.2–0.6) compositionally complex alloys10.1557/jmr.2019.40 ↗
12. Optimization for carbide distribution and ratio to improve the tribological performance of FCC-based (CrFeNi)100-xCx medium-entropy alloys (x = 0,4,8) fabricated by powder metallurgy10.1016/j.ijrmhm.2022.105858 ↗
13. Abrasion resistance of Ni-Cr-B-Si coating deposited by laser cladding process10.1016/j.triboint.2019.106002 ↗
14. Persistence of the thin layers of transition metal carbides in contact with liquid NiBSi alloy
15. Enhanced high-temperature oxidation resistance of low-cost Fe–Cr–Ni medium entropy alloy by Ce-adulterated10.1016/j.jmrt.2021.12.087 ↗
16. Solid-solution phase formation rules for multi-component alloys10.1002/adem.200700240 ↗
17. Synthesis of equi-atomic Ti-Al-Mo-Si-Ni high entropy alloy via spark plasma sintering technique: evolution of microstructure, wear, corrosion and oxidation behaviour10.1016/j.rinp.2019.102465 ↗
18. Immersion corrosion and electrochemical performances of laser cladded FeSiB, FeSiBCr and FeSiBCrMo coatings in 3.5 wt% NaCl solution10.1016/j.surfcoat.2019.125229 ↗
19. Phase stability in high entropy alloys: formation of solid-solution phase or amorphous phase10.1016/S1002-0071(12)60080-X ↗
20. Microstructure, tribological performance, and wear mechanism of Cr- and Mo-reinforced FeSiB coatings by laser cladding10.1007/s11665-020-05187-w ↗
21. Microstructure and friction properties of GNP/Ni-based superalloy composite coating by laser melting deposition10.1016/j.apsusc.2020.148492 ↗
22. Effects of process parameters on microstructures and tensile properties of laser melting deposited CrMnFeCoNi high entropy alloys10.1016/j.msea.2018.11.110 ↗
23. Effect of Si element on phase transformation and mechanical properties for FeCoCrNiSix high entropy alloys10.1016/j.matlet.2020.128809 ↗
24. Characteristics and performance of hard Ni60 alloy coating produced with supersonic laser deposition technique10.1016/j.matdes.2015.05.087 ↗
25. Kou · 2003
26. Effect of minor B addition on microstructure and properties of AlCoCrFeNi multi-compenent alloy10.1016/S1003-6326(15)63922-X ↗
27. Effects of circular beam oscillation on microstructure, mechanical and electrochemical corrosion properties of laser melting deposited Inconel 62510.1016/j.jmapro.2022.10.059 ↗
28. Deformation behavior and toughening of high-entropy alloys
29. Investigation of microstructure and wear resistance of laser-clad CoCrNiTi and CrFeNiTi medium-entropy alloy coatings on Ti sheet10.1016/j.optlastec.2021.107518 ↗
30. Six decades of the Hall–Petch effect – a survey of grain-size strengthening studies on pure metals10.1080/09506608.2016.1191808 ↗
31. Development of cemented carbides with CoxFeNiCrCu high-entropy alloyed binder prepared by spark plasma sintering10.1016/j.ijrmhm.2021.105751 ↗
32. Microstructure, mechanical properties, and corrosion resistance of SiC reinforced AlxCoCrFeNiTi1-x high-entropy alloy coatings prepared by laser cladding10.1016/j.surfcoat.2022.128349 ↗
33. Characterization of hot deformation behavior of Ti–3Al–5Mo–4.5V alloy with a martensitic starting microstructure10.1142/S2424913017500114 ↗
34. Wear resistance of FeCoCrNiMnAlx high-entropy alloy coatings at high temperature10.1016/j.apsusc.2020.145736 ↗
35. Improved high-temperature hardness and wear resistance of Inconel 625 coatings fabricated by laser cladding10.1016/j.jmatprotec.2016.12.001 ↗
36. Microstructure and tribological behaviors of FeCoCrNiMoSix high-entropy alloy coatings prepared by laser cladding10.1016/j.surfcoat.2021.128009 ↗
37. Effect of Si addition on microstructure and wear behavior of AlCoCrFeNi high-entropy alloy coatings prepared by laser cladding10.1016/j.surfcoat.2020.126522 ↗
38. Microstructure and mechanical properties of FeCoCrNiNbX high-entropy alloy coatings10.1016/j.physb.2018.08.044 ↗
39. Corrosion behavior of a non-equiatomic CoCrFeNiTi high-entropy alloy: a comparison with 304 stainless steel in simulated body fluids10.1016/j.jallcom.2021.163036 ↗
40. Corrosion behaviors and mechanism of CrFeNi2 based high-entropy alloys10.1016/j.corsci.2022.110562 ↗
41. Corrosion behavior of Fe-Mo and Fe-Mo-P cathodic coatings in the simulated electrolyte for sodium chlorate production10.1016/j.electacta.2018.03.019 ↗
42. Corrosion behavior of the electroless Ni-P coating on the pore walls of the lotus-type porous copper10.1016/j.corsci.2019.108202 ↗
43. Formation and behaviour study of an environment-friendly corrosion inhibitor by electrochemical methods10.1016/j.electacta.2005.06.001 ↗
44. Insight into the corrosion evolution of Fe-based amorphous coatings under wet-dry cyclic conditions10.1016/j.electacta.2019.07.058 ↗
45. Corrosion resistance of three-layer superhydrophobic composite coating on carbon steel in seawater10.1016/j.electacta.2013.03.071 ↗
46. Effect of the substitution of Si for B on thermal stability, magnetic properties and corrosion resistance in novel Fe-rich amorphous soft magnetic alloy10.1016/j.intermet.2021.107306 ↗
47. Effect of Fe content on microstructure and corrosion resistance of Ni-based alloy formed by laser cladding10.1016/j.surfcoat.2022.128761 ↗
48. Additively manufactured 316L stainless steel with improved corrosion resistance and biological response for biomedical applications
49. Essential role of element Si in corrosion resistance of a bridge steel in chloride atmosphere10.1016/j.corsci.2020.108758 ↗