Using direct high-pressure torsion synthesis to produce aluminium matrix nanocomposites reinforced with carbon nanotubes
Source abstract
Abstract
Aluminium matrix nanocomposites reinforced with carbon nanotubes were fabricated in a new way by direct synthesis using high-pressure torsion (HPT). Aluminium of 99.99% and 99.5% purities were used as matrix materials with carbon nanotubes in amounts of 0.5 and 1 wt.% as reinforcement. The HPT processing led to extensive grain size refinement which was significantly higher than for pure metals and to a relatively uniform distribution of the fillers. The grain size of the matrix was smaller for Al99.5 compared to Al99.99 while the particle spatial distribution was more homogenous for the Al99.99 matrix. This was attributed to a lower hardness and higher plasticity of Al 99.99 alloy. The addition of carbon nanotubes also improved the thermal stability of the ultrafine-grained structure, especially if homogenously distributed as for the Al99.99 matrix nanocomposites.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Advanced lightweight materials for automobiles: a review10.1016/j.matdes.2022.110994 ↗
2. Recent development in aluminium for automotive applications
3. Lightweight automotive components based on nanodiamond-reinforced aluminium alloy: a technical and environmental evaluation10.1016/j.diamond.2018.12.015 ↗
4. Recent developments in the manufacturing technologies of composite components and their cost-effectiveness in the automotive industry: a review study10.1016/j.compstruct.2021.113864 ↗
5. Valiev · 2014
6. Fundamentals of superior properties in bulk NanoSPD materials10.1080/21663831.2015.1060543 ↗
7. Using high-pressure torsion for metal processing: fundamentals and applications10.1016/j.pmatsci.2008.03.002 ↗
8. Enhanced grain refinement and microhardness by hybrid processing using hydrostatic extrusion and high-pressure torsion10.1016/j.msea.2017.12.007 ↗
9. Wear properties of high pressure torsion processed ultrafine grained Al-7%Si alloy10.1016/j.matdes.2013.07.045 ↗
10. The fabrication of graphene-reinforced Al-based nanocomposites using high-pressure torsion10.1016/j.actamat.2018.10.060 ↗
11. Structural impact on the Hall-Petch relationship in an Al-5Mg alloy processed by high-pressure torsion10.1016/j.msea.2014.12.027 ↗
12. Evolution of hardness in ultrafine-grained metals processed by high-pressure torsion10.1016/j.jmrt.2014.06.002 ↗
13. Microstructure changes in HPT-processed copper occurring at room temperature10.1016/j.matchar.2019.03.046 ↗
14. Nanostructuring Nb by various techniques of severe plastic deformation10.1016/j.msea.2011.12.082 ↗
15. An examination of the saturation microstructures achieved in ultrafine-grained metals processed by high-pressure torsion10.1016/j.jmrt.2014.10.002 ↗
16. Microstructural saturation, hardness stability and superplasticity in ultrafine-grained metals processed by a combination of severe plastic deformation techniques10.22226/2410-3535-2015-3-335-340 ↗
17. An evaluation of the saturation hardness in an ultrafine-grained aluminum 7075 alloy processed using different techniques10.1007/s10853-015-8989-x ↗
18. High-pressure torsion of aluminum with ultrahigh purity (99.9999%) and occurrence of inverse Hall-Petch relationship10.1016/j.msea.2016.10.066 ↗
19. Significance of homologous temperature in softening behavior and grain size of pure metals processed by high-pressure torsion10.1016/j.msea.2011.06.080 ↗
20. Thermal structure changes in copper and nickel processed by severe plastic deformation10.1016/S0921-5093(97)00247-5 ↗
21. Effect of thermal treatment on microstructure in high pressure torsion (HPT) deformed nickel10.1016/j.msea.2004.01.112 ↗
22. The strength and thermal stability of Al-5Mg alloys nano-engineered using methods of metal forming10.1016/j.msea.2012.06.068 ↗
23. Strengthening and grain refinement in an Al-6061 metal matrix composite through intense plastic straining10.1016/S1359-6462(98)00398-4 ↗
24. Homogenization of metal matrix composites by high-pressure torsion10.1007/s11661-005-0281-2 ↗
25. Aluminum matrix composites reinforced with multi-walled boron nitride nanotubes fabricated by a high-pressure torsion technique10.1016/j.matdes.2015.08.162 ↗
26. Production of aluminum-matrix carbon nanotube composite using high pressure torsion10.1016/j.msea.2008.02.022 ↗
27. Microstructure and tensile behavior of Al and Al-matrix carbon nanotube composites processed by high pressure torsion of the powders10.1007/s10853-010-4382-y ↗
28. Effects of carbon nanotube content and annealing temperature on the hardness of CNT reinforced aluminum nanocomposites processed by the high pressure torsion technique10.1016/j.jallcom.2014.05.219 ↗
29. Grain growth analysis of multiwalled carbon nanotube-reinforced bulk Ni composites10.1016/j.carbon.2013.12.089 ↗
30. The effect of sintering temperature on Cu-Cnts nano composites properties produced by pm method10.2298/SOS1804477D ↗
31. Processing of copper-carbon nanotube composites by vacuum hot pressing technique10.1016/j.msea.2012.09.080 ↗
32. Mechanical properties of nanostructured Al2024-MWCNT composite prepared by optimized mechanical milling and hot pressing methods10.1016/j.apt.2011.02.008 ↗
33. The preparation of double-walled carbon nanotube/Cu composites by spark plasma sintering, and their hardness and friction properties10.1016/j.carbon.2011.06.063 ↗
34. Multi-walled carbon nanotube-aluminum matrix composites prepared by combination of hetero-agglomeration method, spark plasma sintering and hot extrusion10.2320/matertrans.M2011146 ↗
35. Intermetallic growth kinetics and microstructure evolution in Al-Cu-Al metal-matrix composite processed by high pressure torsion10.1016/j.matlet.2019.07.124 ↗
36. Rapid synthesis of an extra hard metal matrix nanocomposite at ambient temperature10.1016/j.msea.2015.03.042 ↗
37. Synthesis of a bulk nanostructured metastable Al alloy with extreme supersaturation of Mg10.1038/s41598-019-53614-3 ↗
38. Evaluation of thermal stability of ultrafine grained aluminium matrix composites reinforced with carbon nanotubes10.1016/j.compscitech.2011.09.001 ↗
39. Microstructure evolution, lattice rotation retardation and grain orientation fragmentation in commercial purity aluminium deformed by high pressure torsion10.1016/j.jmrt.2020.04.056 ↗
40. The process of grain refinement in equal-channel angular pressing10.1016/S1359-6454(97)00494-1 ↗
41. Equal-channel angular pressing of commercial aluminum alloys: grain refinement, thermal stability and tensile properties10.1007/s11661-000-0011-8 ↗
42. Pinning force from multiple second-phase particles in grain growth10.1016/j.commatsci.2014.06.030 ↗
43. Stability of nanostructured metals and alloys10.1016/j.scriptamat.2004.05.014 ↗
44. Influences of grain/particle interfacial energies on second-phase particle pinning grain coarsening of polycrystalline10.1016/j.jallcom.2019.152848 ↗
45. Modelling of High Pressure Torsion using FEM10.1016/j.proeng.2017.10.911 ↗
46. Structural aspects of the formation of multilayer composites from dissimilar materials upon high-pressure torsion10.3390/ma16103849 ↗
47. Vortices and mixing in metals during severe plastic deformation10.4028/www.scientific.net/MSF.683.213 ↗
48. Effect of carbon nanotube (CNT) content on the properties of in-situ synthesis CNT reinforced Al composites10.1016/j.msea.2016.02.062 ↗
49. On the homogeneity of deformation by high pressure torsion10.1016/j.scriptamat.2004.04.025 ↗
50. The deformation and ageing of mild steel III discussion of results10.1088/0370-1301/64/9/303 ↗
51. The cleavage strength of polycrystals
52. Breaks in the Hall–Petch relationship after severe plastic deformation of magnesium, aluminum, copper, and iron10.3390/cryst13030413 ↗
53. Five decades of the Zener equation10.2355/isijinternational.38.913 ↗
54. McEvily · Fail. Fatigue · 1974