A lightweight intermetallic Al-Cr-Ti medium-entropy alloy with good mechanical properties and oxidation resistance
Source abstract
Abstract
Structure, mechanical properties, and oxidation behaviour of a Al 55Cr 23Ti 22 (in at%) lightweight (ρ = 3.92 g/cm 3 ) medium-entropy intermetallic alloy were studied. The initial as-cast structure consisted of an (Al, Ti)-rich L1 2 matrix and Cr-rich C11 b lamellae with semi-coherent interfaces due to a (111) L12 || (110) C11b, [1 1 ̅ 0] L12 || [3 3 ̅ 1 ̅ ] C11b orientation relationship. The alloy demonstrated a combination of good plasticity (17–19%) and strength (600–610 MPa) both at 22 and 600 ℃; the latter gradually decreased to 155 MPa at 1000 ℃, while plastic strain exceeded 40%. Deformation at 600 and 800 ℃ led to the precipitation of (semi-) coherent C11 b_1 and Al 2Ti particles inside the L1 2 matrix and C11 b phase, respectively, due to elemental redistributions within the initial phases and low lattice mismatch with a matrix. The alloy gained only 0.27 mg/cm 2 after oxidation in the air at 1000 ℃ for 100 h thanks to an early formation of a protective Al 2O 3 layer. Compared to the current state-of-art lightweight and Al/Cr-containing refractory high/medium-entropy alloys, the Al 55Cr 23Ti 22 alloy had a higher 1000 ℃-specific strength, room-temperature plastic strain, and demonstrated the best oxidation resistance. The obtained results suggest that the multicomponent L1 2-based trialuminides can be used as structural materials for potential high-temperature applications.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. The hotter the engine, the better10.1126/science.1179327 ↗
2. Ordered intermetallic alloys: an assessment10.1016/S0966-9795(97)00045-9 ↗
3. Emerging applications of intermetallics10.1016/S0966-9795(00)00077-7 ↗
4. Intermetallics: Why is it so difficult to introduce them in gas turbine engines10.1016/j.intermet.2006.01.064 ↗
5. Ultrahigh-strength and ductile superlattice alloys with nanoscale disordered interfaces10.1126/science.abb6830 ↗
6. Microstructure and creep performance of a multicomponent Co-based L12–ordered intermetallic alloy10.1016/j.actamat.2020.06.050 ↗
7. High-entropy intermetallic compound with ultra-high strength and thermal stability10.1016/j.scriptamat.2020.113674 ↗
8. Chemically complex intermetallic alloys: A new frontier for innovative structural materials10.1016/j.mattod.2021.12.004 ↗
9. Off-stoichiometry-guided design of high-strength chemically complex intermetallic-based alloys with outstanding ductility10.1016/j.jmst.2023.02.033 ↗
10. A Co-rich chemically complex intermetallic alloy with extraordinary strength-ductility synergy10.1016/j.scriptamat.2023.115371 ↗
11. Deformation and Fracture of L12 Trialuminides10.2355/isijinternational.31.1063 ↗
12. Microhardness and compressive mechanical behavior of L12 titanium trialuminides10.1007/BF02656514 ↗
13. Characteristics of elevated temperature deformation in several L12- modified Al3Ti-based alloys10.1016/0966-9795(95)98933-Y ↗
14. Effects of manganese on the L12 compound formation in Al3Ti-based alloys10.1016/0966-9795(96)00005-2 ↗
15. Effect of Cr on the high temperature oxidation of L12-type Al3Ti intermetallics10.1016/S0921-5093(00)00956-4 ↗
16. Mechanical behaviour of Al3Ti intermetallic and L12 phases on its basis10.1016/S0966-9795(01)00073-5 ↗
17. Fracture toughness and yield strength of boron-doped, high (Ti+Mn) L12 titanium trialuminides10.1016/S0966-9795(00)00105-9 ↗
18. Creep properties of boron-doped dual-phase Ti-rich L12-based trialuminide intermetallics10.1016/S1359-6462(03)00111-8 ↗
19. Ternary intermetallics in aluminiumrefractory metal-X systems (X = V, Cr, Mn, Fe, Co, Ni, Cu, Zn10.1179/095066090790324037 ↗
20. Microstructure and ordering of L12 titanium trialuminides10.1007/BF02646114 ↗
21. Formation of ternary L12 compounds in Al3Ti-base alloys10.1016/0966-9795(93)90020-V ↗
22. Phase stability and microstructure of Al-Ti-Fe near Al3Ti10.1007/BF02670598 ↗
23. Structure/property observations for Al Ti Cr alloys near the cubic (Al,Cr)3Ti phase10.1016/0921-5093(92)90058-9 ↗
24. L12 (Al,Cr)3Ti-based two-phase intermetallic compounds-I. Plastic deformation behavior10.1016/S1359-6462(96)00458-7 ↗
25. Formation of periodic microstructures involving the L12 phase in eutectic Al-Ti-Cr alloys10.1016/S0966-9795(03)00122-5 ↗
26. Phase stability of L12-based alloys in Al-Ti-Cr systems10.1016/S0966-9795(03)00084-0 ↗
27. New Light-weight Eutectic Alloys Based on L12 Cubic Aluminum Intermetallics with Enhanced Heat Resistance10.1515/HTMP.2006.25.1-2.11 ↗
28. Microstructure control in two-phase Al–21Ti–23Cr alloy10.1016/S0966-9795(99)00124-7 ↗
29. Microstructure of alumina-forming oxidation resistant Al-Ti-Cr alloys10.1016/0956-716X(95)00251-P ↗
30. The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid iron10.1007/BF03037838 ↗
31. Refractory high entropy alloy with ductile intermetallic B2 matrix / hard bcc particles and exceptional strain hardening capacity10.1016/j.mtla.2021.101225 ↗
32. Unique precipitations in a novel refractory Nb-Mo-Ti-Co high-entropy superalloy10.1080/21663831.2021.2022033 ↗
33. Precipitation of γNb5Si3 in Nb-Si based ultrahigh temperature alloys10.1016/j.intermet.2018.04.007 ↗
34. Directional solidification of Fe-Al-Ta eutectic by electron beam floating zone melting10.1016/j.jallcom.2019.01.158 ↗
35. Design and characterization of eutectic refractory high entropy alloys10.1016/j.mtla.2021.101057 ↗
36. Metal-carbide eutectics with multiprincipal elements make superrefractory alloys10.1126/sciadv.abo2068 ↗
37. Precipitation behavior of Nb-Si-based in-situ composite manufactured by laser directed energy deposition10.1016/j.scriptamat.2021.114288 ↗
38. Compression behavior of the L12 intermetallic Al22Fe3Ti810.1016/S0036-9748(88)80094-2 ↗
39. Structure and compression behaviour of the L12Al5CuTi2 intermetallic compound10.1016/0036-9748(89)90326-8 ↗
40. Formation of structural L12 compounds in the ternary Al-Ti-Cr system10.1016/0956-716X(90)90191-I ↗
41. Comments on the temperature dependence of compressive yield strength in polycrystalline aluminum - rich L12 compounds10.1016/0956-716X(90)90534-N ↗
42. Birks · 2006
43. Al-Cr-Ti (Aluminum-Chromium-Titanium10.1007/s11669-005-0087-3 ↗
44. An AlNbTiVZr0.5 high-entropy alloy combining high specific strength and good ductility10.1016/j.matlet.2015.08.099 ↗
45. Structure and mechanical properties of the AlCrxNbTiV (x = 0, 0.5, 1, 1.5) high entropy alloys10.1016/j.jallcom.2015.08.224 ↗
46. Design of novel low-density refractory high entropy alloys for high-temperature applications10.1016/j.msea.2019.03.054 ↗
47. Microstructure and mechanical properties of lightweight AlxCrNbTiV(x = 0.2, 0.5, 0.8) refractory high entropy alloys10.1016/j.ijrmhm.2022.105784 ↗
48. Design and development of low density, high strength ZrNbAlVTi high entropy alloy for high temperature applications10.1016/j.ijrmhm.2023.106222 ↗
49. Heterostructured materials: superior properties from hetero-zone interaction10.1080/21663831.2020.1796836 ↗
50. Unveiling microstructural origins of the balanced strength–ductility combination in eutectic high-entropy alloys at cryogenic temperatures10.1080/21663831.2022.2078169 ↗
51. On the room-temperature tensile deformation behavior of a cast dual-phase high-entropy alloy CrFeCoNiAl0.710.1016/j.jmst.2021.01.053 ↗
52. Oxidation behavior of a refractory NbCrMo0.5Ta0.5TiZr alloy10.1007/s10853-012-6582-0 ↗
53. High temperature oxidation behavior of an equimolar refractory metal-based alloy 20Nb-20Mo-20Cr-20Ti-20Al with and without Si addition10.1016/j.jallcom.2016.07.219 ↗
54. High temperature oxidation behaviors of equimolar NbTiZrV and NbTiZrCr refractory complex concentrated alloys (RCCAs10.1016/j.jallcom.2017.09.164 ↗
55. A combinatorial approach for the synthesis and analysis of AlxCryMozNbTiZr high-entropy alloys: oxidation behavior
56. Native oxidation resistance of Al20Nb30Ta10Ti30Zr10 refractory complex concentrated alloy (RCCA10.1016/j.jallcom.2019.02.128 ↗
57. Combinatorial synthesis and analysis of AlxTayVz-Cr20Mo20Nb20Ti20Zr10 and Al10CrMoxNbTiZr10 refractory high-entropy alloys: Oxidation behavior10.1016/j.jallcom.2020.154427 ↗
58. Oxidation behaviour of eutectic refractory high-entropy alloys at 800–1000 °C10.1016/j.corsci.2022.110464 ↗
59. Current status of research on the oxidation behavior of refractory high entropy alloys10.1002/adem.202001047 ↗
60. The Ellingham diagram, (n.d.). https://www.doitpoms.ac.uk/tlplib/ellingham_diagrams/ellingham.php (accessed August 16, 2023).
61. The role of Cr in promoting protective alumina scale formation by γ-based Ti-Al-Cr alloys—I. Compatibility with alumina and oxidation behavior in oxygen10.1016/S1359-6454(96)00362-X ↗
62. The role of Cr in promoting protective alumina scale formation by γ-based Ti-Al-Cr alloys— II. Oxidation behavior in air10.1016/S1359-6454(96)00361-8 ↗