3D-printed strong and ductile high-entropy alloys with orientation arranged nanostructure complex
Source abstract
Abstract
The rapid development of 3D printing technologies demands new materials with novel properties, as many high-strength metallic materials (up to over 1000 MPa) suffer from a significant weakness in ductility despite their enhanced mechanical properties, particularly in tension strength. To address this issue, we fabricated precipitation-hardened high-entropy alloy (Fe 28Co 29.5Ni 27.5Al 8.5Ti 6.5 ) and employed aging post-treatment to obtain a duplex multicomponent intermetallic nanoprecipitate arrangement while retaining the in-situ dislocation network features. This approach resulted in the formation of a novel orientation arranged nanostructure complex (NSC) in the alloy. The NSC structure is composed of duplex multicomponent intermetallic nanoprecipitates (L1 2 and L2 1 phases), disordered multicomponent FCC matrix, and in-situ dislocation network. This resulted in ultra-high tensile strengths of 1430 MPa and an excellent tensile elongation close to 16%, surpassing the performance of other advanced commercial steels and alloys. These findings offer an effective approach to facilitate the design of high-strength and high-ductility structural materials for industrial applications. This is achieved by tailoring the microstructure through a combination of in-situ generation of high-density dislocations structure and multicomponent intermetallic nanoprecipitates in additive manufacturing. As such, this study represents an important step forward in the development of advanced materials for 3D printing technologies.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. High-entropy alloys10.1038/s41578-019-0121-4 ↗
2. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
3. Phase Engineering of High-Entropy Alloys10.1002/adma.201907226 ↗
4. Enhancing fatigue life by ductile-transformable multicomponent B2 precipitates in a high-entropy alloy10.1038/s41467-021-23689-6 ↗
5. Tensile overload-induced texture effects on the fatigue resistance of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2022.118585 ↗
6. Low-cycle fatigue behavior and deformation mechanisms of a dual-phase Al0.5CoCrFeMnNi high-entropy alloy10.1016/j.ijfatigue.2022.107075 ↗
7. An assessment of the thermal stability of refractory high entropy superalloys10.1016/j.jallcom.2020.157583 ↗
8. Refractory alloying additions on the thermal stability and mechanical properties of high-entropy alloys10.1016/j.msea.2020.140020 ↗
9. Thermal stability of AlCoFeMnNi high-entropy alloy10.1016/j.scriptamat.2018.12.017 ↗
10. In-situ synthesized age-hardenable high-entropy composites with superior wear resistance10.1016/j.compositesb.2022.109795 ↗
11. Laser surface treatment-introduced gradient nanostructured TiZrHfTaNb refractory high-entropy alloy with significantly enhanced wear resistance10.1016/j.jmst.2021.09.029 ↗
12. On the enhanced wear resistance of CoCrFeMnNi high entropy alloy at intermediate temperature10.1016/j.scriptamat.2020.05.053 ↗
13. Recent advances on environmental corrosion behavior and mechanism of high-entropy alloys10.1016/j.jmst.2020.11.044 ↗
14. Corrosion resistance enhancement of CoCrFeMnNi high-entropy alloy fabricated by additive manufacturing10.1016/j.corsci.2020.108954 ↗
15. Corrosion resistant nanostructured eutectic high entropy alloy10.1016/j.corsci.2019.108315 ↗
16. The effects of irradiation on CrMnFeCoNi high-entropy alloy and its derivatives10.1016/j.pmatsci.2021.100807 ↗
17. Helium implantation damage resistance in nanocrystalline W-Ta-V-Cr high entropy alloys
18. Outstanding radiation resistance of tungsten-based high-entropy alloys10.1126/sciadv.aav2002 ↗
19. High-entropy-stabilized chalcogenides with high thermoelectric performance10.1126/science.abe1292 ↗
20. High-entropy alloys: emerging materials for advanced functional applications10.1039/D0TA09601F ↗
21. High-entropy energy materials: challenges and new opportunities10.1039/D1EE00505G ↗
22. Functional properties and promising applications of high entropy alloys10.1016/j.scriptamat.2020.06.017 ↗
23. Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys10.1016/j.pmatsci.2018.12.003 ↗
24. Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys10.1126/science.aas8815 ↗
25. A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength
26. Ultrastrong medium-entropy single-phase alloys designed via severe lattice distortion10.1002/adma.201807142 ↗
27. A strong and ductile medium-entropy alloy resists hydrogen embrittlement and corrosion
28. A high-entropy alloy with dislocation-precipitate skeleton for ultrastrength and ductility10.1016/j.actamat.2022.117975 ↗
29. Multi-type dislocation substructure evolution in a high-strength and ductile duplex high-entropy nanocomposites10.1016/j.compositesb.2022.110322 ↗
30. Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off10.1038/nature17981 ↗
31. Phase-Transformation Ductilization of Brittle High-Entropy Alloys via Metastability Engineering10.1002/adma.201701678 ↗
32. Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys10.1126/science.abf6986 ↗
33. Ductile and ultrahigh-strength eutectic high-entropy alloys by large-volume 3D printing10.1016/j.jmst.2022.04.004 ↗
34. Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes10.1038/s41586-018-0685-y ↗
35. Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy10.1038/s41467-020-16085-z ↗
36. Dynamically reinforced heterogeneous grain structure prolongs ductility in a medium-entropy alloy with gigapascal yield strength10.1073/pnas.1807817115 ↗
37. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
38. Recent Advances on High-Entropy Alloys for 3D Printing10.1002/adma.201903855 ↗
39. Material-structure-performance integrated laser-metal additive manufacturing10.1126/science.abg1487 ↗
40. Microalloyed medium-entropy alloy (MEA) composite nanolattices with ultrahigh toughness and cyclability10.1016/j.mattod.2020.10.003 ↗
41. Additive manufacturing of multi-material structures10.1016/j.mser.2018.04.001 ↗
42. Micro-cracking, microstructure and mechanical properties of Hastelloy-X alloy printed by laser powder bed fusion: As-built, annealed and hot-isostatic pressed
43. Dislocation network in additive manufactured steel breaks strength–ductility trade-off10.1016/j.mattod.2017.11.004 ↗
44. High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties
45. Mechanical behavior of high-entropy alloys10.1016/j.pmatsci.2021.100777 ↗
46. Microstructures and properties of high-entropy alloys
47. Ultrastrong lightweight compositionally complex steels via dual-nanoprecipitation
48. Superior high-temperature properties and deformation-induced planar faults in a novel L12-strengthened high-entropy alloy10.1016/j.actamat.2020.02.028 ↗
49. Enhanced strengthening and hardening via self-stabilized dislocation network in additively manufactured metals10.1016/j.mattod.2021.06.002 ↗
50. Fisher · 2012
51. H.L.Blaine Geddes, and Xiao Huang, Superalloys_ Alloying and Performance ASM International, (2010).10.31399/asm.tb.sap.9781627083133 ↗
52. Control of nanoscale precipitation and elimination of intermediate-temperature embrittlement in multicomponent high-entropy alloys10.1016/j.actamat.2020.02.059 ↗
53. Additive manufacturing of the ferritic stainless steel SS441
54. Selective laser melting of duplex stainless steel 2205: effect of post-processing heat treatment on microstructure, mechanical properties, and corrosion resistance10.3390/ma12152468 ↗
55. Selective laser melting of crack-free high density M2 high speed steel parts by baseplate preheating10.1115/1.4028513 ↗
56. Z. Liu, C. Chua, K. Leong, K. Kempen, L. Thijs, E. Yasa, J. Van-Humbeeck, J. Kruth, A preliminary investigation on selective laser melting of M2 high speed steel, 5th International Conference on Advanced Research and Rapid Prototyping, Leiria, Portugal, 2011, pp. 339–346.10.1201/b11341-54 ↗
57. Further studies in selective laser melting of stainless and tool steel powders10.1016/j.ijmachtools.2006.09.013 ↗
58. Advanced mechanical strength in post heat treated SLM 2507 at room and high temperature promoted by hard/ductile sigma precipitates10.3390/met9020199 ↗
59. Novel ferritic stainless steel formed by laser melting from duplex stainless steel powder with advanced mechanical properties and high ductility10.1016/j.msea.2016.04.027 ↗
60. Additively manufactured nitrogen-atomized 17-4 PH stainless steel with mechanical properties comparable to wrought10.1007/s11661-019-05124-0 ↗
61. Cyclic deformation and fatigue behavior of additively manufactured 17–4 PH stainless steel10.1016/j.ijfatigue.2019.02.006 ↗
62. R. Shrestha, P.D. Nezhadfar, M. Masoomi, J. Simsiriwong, N. Pham, N. Shamsaei, Effects of design parameters on thermal history and mechanical behavior of additively manufactured 17–4 PH stainless steel, Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium—An Additive Manufacturing Conference, 2018, pp. 1277–1289.
63. Study on 17-4 PH stainless steel produced by selective laser melting
64. Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel10.1016/j.ijfatigue.2016.03.014 ↗
65. Effect of scan pattern on the microstructure and mechanical properties of powder bed fusion additive manufactured 17-4 stainless steel10.1016/j.matdes.2017.07.047 ↗
66. Mechanical behavior of additive manufactured AISI 420 martensitic stainless steel10.1016/j.msea.2019.138815 ↗
67. Microstructure-property relationships of 420 stainless steel fabricated by laser-powder bed fusion10.1016/j.powtec.2018.11.075 ↗
68. Effect of heat treatment on microstructure and mechanical behaviours of 18Ni-300 maraging steel manufactured by selective laser melting10.1016/j.optlastec.2019.105725 ↗
69. Process phenomena influencing the tensile and anisotropic characteristics of additively manufactured maraging steel10.1016/j.msea.2018.12.070 ↗
70. Plastic anisotropy of additively manufactured maraging steel: Influence of the build orientation and heat treatments
71. Microstructural characterisation and in-situ straining of additive-manufactured X3NiCoMoTi 18-9-5 maraging steel10.1016/j.msea.2019.02.041 ↗
72. Effect of scan direction on tensile properties and fractography of laser additive manufactured maraging steel10.1016/j.matpr.2019.07.323 ↗
73. Microstructural characterization and properties of selective laser melted maraging steel with different build directions10.1080/14686996.2018.1527645 ↗
74. Effect of laser scanning strategies on texture, physical and mechanical properties of laser sintered maraging steel10.1016/j.msea.2018.07.089 ↗
75. Microstructural evolution, nanoprecipitation behavior and mechanical properties of selective laser melted high-performance grade 300 maraging steel10.1016/j.matdes.2017.08.026 ↗
76. Tensile, fracture, and fatigue crack growth properties of a 3D printed maraging steel through selective laser melting10.1016/j.jallcom.2017.07.177 ↗
77. C. Tan, K. Zhou, X. Tong, Y. Huang, J. Li, W. Ma, F. Li, T. Kuang, Microstructure and mechanical properties of 18Ni-300 maraging steel fabricated by selective laser melting, Proceedings of the 2016 6th International Conference on Advanced Design and Manufacturing Engineering (ICADME 2016), 2016, pp. 404–410.10.2991/icadme-16.2016.66 ↗
78. Aging behaviour and mechanical performance of 18-Ni 300 steel processed by selective laser melting10.3390/met6090218 ↗
79. Preliminary investigation on distribution of residual stress generated by the selective laser melting process10.1243/03093247JSA464 ↗
80. Microstructural effects on the tensile and fracture behavior of selective laser melted H13 tool steel under varying conditions10.1016/j.matchar.2019.109817 ↗
81. Comparison of the fatigue strength between additively and conventionally fabricated tool steel 1.2344
82. Numerical and experimental evaluation of a conformally cooled H13 steel injection mould manufactured with selective laser melting10.1007/s00170-017-0426-7 ↗
83. Humbeeck, Influence of powder bed preheating on microstructure and mechanical properties of H13 tool steel SLM parts10.1016/j.phpro.2016.08.092 ↗
84. The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing10.1016/j.actamat.2018.10.032 ↗
85. A defect-resistant Co-Ni superalloy for 3D printing10.1038/s41467-020-18775-0 ↗
86. Ultrastrong and ductile additively manufactured precipitation-hardening medium-entropy alloy at ambient and cryogenic temperatures10.1016/j.actamat.2022.118142 ↗
87. Strong yet ductile nanolamellar high-entropy alloys by additive manufacturing10.1038/s41586-022-04914-8 ↗
88. Strengthening and fracture mechanisms of a precipitation hardening high-entropy alloy fabricated by selective laser melting10.1080/17452759.2022.2037055 ↗
89. Courtney · 2005
90. Geometrically necessary dislocations and strain-gradient plasticity: a few critical issues10.1016/S1359-6462(02)00335-4 ↗
91. Mechanism-based strain gradient plasticity—I. Theory10.1016/S0022-5096(98)00103-3 ↗
92. Mechanical properties of copper/bronze laminates: Role of interfaces10.1016/j.actamat.2016.06.023 ↗
93. Crystallographic aspects of geometrically-necessary and statistically-stored dislocation density10.1016/S1359-6454(99)00020-8 ↗
94. The origin of high-density dislocations in additively manufactured metals10.1080/21663831.2020.1751739 ↗
95. Non-equivalence contribution of geometrically necessary dislocation and statistically stored dislocation in work-hardened metals10.1016/j.msea.2022.142728 ↗
96. Ultrahigh strength and ductility in newly developed materials with coherent nanolamellar architectures10.1038/s41467-020-20109-z ↗
97. Direct observation of Lomer-Cottrell locks during strain hardening in nanocrystalline nickel by in situ TEM10.1038/srep01061 ↗
98. Faceted Kurdjumov-Sachs interface-induced slip continuity in the eutectic high-entropy alloy, AlCoCrFeNi2.110.1016/j.jmst.2020.04.073 ↗
99. Brittle intermetallic compound makes ultrastrong low-density steel with large ductility10.1038/nature14144 ↗
100. SLM Fe50Mn30Co10Cr10 metastable high entropy alloy with Al-Ti addition: Synergizing strength and ductility10.1016/j.jallcom.2023.168830 ↗