Competitive role of primary γ′ precipitates and annealing twins on the heterogeneous deformation of a polycrystalline ni-based superalloy: Crystal plasticity modeling and experiments
Source abstract
Abstract
A crystal plasticity modeling framework is developed and used in combination with experiments for studying the deformation behavior of a polycrystalline Ni-based superalloy. In particular, the monotonic stress-strain response across a range of temperatures and the misorientation development at room temperature are predicted. The model accounts for individual deformation of the matrix and primary γ ′ phases, with consideration for the various strengthening mechanisms observed in these alloys. The as-received microstructure has been characterized using Energy Dispersive X-Ray Spectroscopy (EDS) and the concentration of the solute atoms present in the γ and primary γ ′ phases obtained from these measurements are used to inform the solute solution strengthening model. Further, the Electron Back Scatter Diffraction (EBSD) microstructures are directly used as inputs for the simulations. The model is first calibrated to the experimental stress-strain response at 293 K and 923 K and then validated by predicting the mechanical response at 523 K and 723 K. Interrupted tensile testing has been performed using a combination of Scanning Electron Microscopy (SEM) and EBSD to study the misorientation developments during deformation. These deformed microstructures are correlated with the simulated EBSD microstructures, in terms of the competitive misorientation developments at grain boundaries, annealing twin boundaries and phase interfaces. Higher misorientation developments were observed at the twin boundaries as compared to the grain boundaries and phase interfaces, indicating a higher propensity of heterogeneous deformation.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (92)
Show source-provided references
1. Microstructure-sensitive modeling of polycrystalline in 10010.1016/j.ijplas.2008.01.001 ↗
2. Strengthening mechanisms in polycrystalline multimodal nickel-base superalloys10.1007/s11661-009-9858-5 ↗
3. High resolution mapping of strain localization near twin boundaries in a nickel-based superalloy10.1016/j.actamat.2015.07.016 ↗
4. Effects of temperature and microstructure on low cycle fatigue behaviour of a pm ni-based superalloy: Ebsd assessment and crystal plasticity simulation10.1016/j.ijfatigue.2022.106818 ↗
5. Shenoy · 2006
6. Numerical modelling of the microstructure effect on fatigue behaviour of ni-base superalloys for turbine disk
7. Mesoscale modeling of microstructurally small fatigue cracks in metallic polycrystals10.1016/j.msea.2014.01.015 ↗
8. Microstructure-sensitive small fatigue crack growth assessment: effect of strain ratio, multiaxial strain state, and geometric discontinuities10.1016/j.ijfatigue.2015.09.007 ↗
9. Examining metrics for fatigue life predictions of additively manufactured in718 via crystal plasticity modeling including the role of simulation volume and microstructural constraints10.1016/j.msea.2020.139312 ↗
10. A combined grain scale elastic–plastic criterion for identification of fatigue crack initiation sites in a twin containing polycrystalline nickel-base superalloy10.1016/j.actamat.2015.09.050 ↗
11. Insight into microstructure-sensitive elastic strain concentrations from integrated computational modeling and digital image correlation10.1016/j.scriptamat.2020.10.001 ↗
12. Development of grain-scale slip activity and lattice rotation fields in inconel 71810.1016/j.actamat.2022.117627 ↗
13. Random errors in digital image correlation due to matched or overmatched shape functions10.1007/s11340-015-0080-7 ↗
14. Characterisation of strain localisation processes during fatigue crack initiation and early crack propagation by sem-dic in an advanced disc alloy10.1016/j.msea.2017.05.091 ↗
15. In-plane and out-of-plane deformation at the sub-grain scale in polycrystalline materials assessed by confocal microscopy10.1016/j.actamat.2019.03.001 ↗
16. Automated and quantitative analysis of plastic strain localization via multi-modal data recombination10.1016/j.matchar.2020.110245 ↗
17. Slip localization in inconel 718: a three-dimensional and statistical perspective10.1016/j.actamat.2021.117037 ↗
18. A statistical study of the relationship between plastic strain and lattice misorientation on the surface of a deformed ni-based superalloy10.1016/j.actamat.2020.05.029 ↗
19. High-resolution elastic strain measurement from electron backscatter diffraction patterns: New levels of sensitivity10.1016/j.ultramic.2005.10.001 ↗
20. Crystal plasticity and high-resolution electron backscatter diffraction analysis of full-field polycrystal ni superalloy strains and rotations under thermal loading10.1016/j.actamat.2014.07.036 ↗
21. Quantitative investigation of micro slip and localization in polycrystalline materials under uniaxial tension10.1016/j.ijplas.2018.04.014 ↗
22. Crystallographic fatigue crack initiation in nickel-based superalloy rené 88dt at elevated temperature10.1016/j.actamat.2009.08.022 ↗
23. Microstructural extremes and the transition from fatigue crack initiation to small crack growth in a polycrystalline nickel-base superalloy10.1016/j.actamat.2012.01.049 ↗
24. An analysis of fatigue crack initiation using 2d orientation mapping and full-field simulation of elastic stress response
25. Microstructural statistics for fatigue crack initiation in polycrystalline nickel-base superalloys10.1007/s10704-017-0241-z ↗
26. High–and low–cycle fatigue crack initiation using polycrystal plasticity10.1098/rspa.2003.1258 ↗
27. A crystal plasticity model incorporating the effects of precipitates in superalloys: application to tensile, compressive, and cyclic deformation of inconel 71810.1016/j.ijplas.2017.09.006 ↗
28. Is stored energy density the primary meso-scale mechanistic driver for fatigue crack nucleation?10.1016/j.ijplas.2017.11.005 ↗
29. Crystal plasticity assessment of inclusion-and matrix-driven competing failure modes in a nickel-base superalloy10.1016/j.actamat.2019.07.024 ↗
30. Dislocation density based crystal plasticity model incorporating the effect of precipitates in in718 under monotonic and cyclic deformation10.1016/j.ijplas.2021.102990 ↗
31. A full-field crystal plasticity model including the effects of precipitates: Application to monotonic, load reversal, and low-cycle fatigue behavior of inconel 71810.1016/j.msea.2020.140478 ↗
32. Deformation behavior of nickel-based superalloy su-263: Experimental characterization and crystal plasticity finite element modeling10.1016/j.msea.2018.08.022 ↗
33. Low cycle fatigue of a directionally solidified nickel-based superalloy: Testing, characterisation and modelling10.1016/j.msea.2017.10.024 ↗
34. Crack-closure simulations of ni-based super-alloy polycrystal, a comparison between experiments and crystal plasticity10.1016/j.msea.2018.10.077 ↗
35. Twin boundary fatigue crack nucleation in a polycrystalline nickel superalloy containing non-metallic inclusions10.1016/j.jmps.2022.104785 ↗
36. Study on creep properties of nickel-based superalloy blades based on microstructure characteristics10.1016/j.jallcom.2021.161710 ↗
37. Influence of hot isostatic pressing on fatigue performance of k403 nickel-based superalloy10.1016/j.jallcom.2015.09.165 ↗
38. Deformation mechanisms of additively manufactured hastelloy-x: A neutron diffraction experiment and crystal plasticity finite element modeling10.1016/j.matdes.2022.111030 ↗
39. Synchronous involvement of topology and microstructure to design additively manufactured lattice structures
40. Effect of printing direction and thickness on the mechanical behavior of slm fabricated hastelloy-x10.1016/j.ijplas.2022.103250 ↗
41. A modelling approach to yield strength optimisation in a nickel-base superalloy10.1016/j.ijplas.2013.08.009 ↗
42. A numerical model to predict mechanical properties of ni-base disk superalloys10.1016/j.ijplas.2018.06.011 ↗
43. The temperature dependence of strengthening mechanisms in ni-based superalloys: A newly re-defined cuboidal model and its implications for strength design10.1016/j.jallcom.2022.167508 ↗
44. Tensile properties of three newly developed ni-base powder metallurgy superalloys10.1016/j.jallcom.2019.07.002 ↗
45. On the role of γ particles within γ′ precipitates on damage accumulation in the p/m nickel-base superalloy n1810.1016/j.msea.2005.04.006 ↗
46. Influence of oxidation on fatigue crack initiation and propagation in turbine disc alloy n1810.1016/j.ijfatigue.2015.02.007 ↗
47. Cullity · 1956
48. Advances in scattered electron intensity distribution imaging for microstructural visualization and correlations with ebsd measurements10.1017/S143192761400600X ↗
49. Electron imaging with an ebsd detector10.1016/j.ultramic.2014.10.002 ↗
50. Digital image correlation of forescatter detector images for simultaneous strain and orientation mapping10.1017/S1431927620001701 ↗
51. Crystal plasticity modeling of non-schmid yield behavior: from ni3al single crystals to ni-based superalloys10.1088/1361-651X/abd621 ↗
52. Crystal plasticity constitutive modeling of tensile, creep and cyclic deformation in single crystal ni-based superalloys10.1016/j.mechmat.2022.104474 ↗
53. Strain localization in ductile single crystals10.1016/0022-5096(77)90001-1 ↗
54. Christine Dianne Allan.Plasticity of nickel base single crystal superalloys. PhD thesis, Massachusetts Institute of Technology, 1995.
55. A crystal plasticity finite element model for flow stress anomalies in ni3al single crystals10.1080/14786435.2015.1073858 ↗
56. Tension-compression asymmetry of nickel-based superalloys: A focused review
57. Single crystal modeling for structural calculations: part 1—model presentation10.1115/1.2903374 ↗
58. Modelling the orientation and direction dependence of the critical resolved shear stress of nickel-base superalloy single crystals10.1016/S1359-6454(99)00404-8 ↗
59. Cube slip and non-schmid effects in single crystal ni-base superalloys10.1088/0965-0393/18/1/015005 ↗
60. Thermodynamics and kinetics of slip
61. Crystal plasticity model for single crystal ni-based superalloys: Capturing orientation and temperature dependence of flow stress10.1016/j.ijplas.2020.102896 ↗
62. Modeling solid solution strengthening in nickel alloys10.1007/s11661-997-0268-2 ↗
63. An analysis of phase stresses in additively manufactured 304l stainless steel using neutron diffraction measurements and crystal plasticity finite element simulations10.1016/j.ijplas.2019.06.005 ↗
64. The role of crystallographic orientations on heterogeneous deformation in a zirconium alloy: a combined experimental and modeling study10.1016/j.ijplas.2020.102785 ↗
65. ρ-cp: Open source dislocation density based crystal plasticity framework for simulating temperature-and strain rate-dependent deformation10.1016/j.commatsci.2023.112182 ↗
66. Moose: Enabling massively parallel multiphysics simulation10.1016/j.softx.2020.100430 ↗
67. A non-schmid crystal plasticity finite element approach to multi-scale modeling of nickel-based superalloys10.1016/j.actamat.2016.05.016 ↗
68. Gradient plasticity in gradient nano-grained metals10.1016/j.eml.2015.12.005 ↗
69. A model for the creep deformation behaviour of single-crystal superalloy cmsx-410.1016/j.actamat.2007.11.031 ↗
70. The plastic flow of binary ni3al single crystals10.1016/0956-7151(91)90172-W ↗
71. Modeling apb energies in multicomponent ni-base superalloys10.1016/j.intermet.2021.107124 ↗
72. Order hardening of mgo by large precipitated volume fractions of spinel particles10.1016/0025-5416(79)90063-6 ↗
73. Prediction of yield strength in a polycrystalline nickel base superalloy during interrupt cooling10.1016/j.scriptamat.2020.03.034 ↗
74. Slip analysis in a ni-base superalloy10.1016/j.actamat.2005.01.025 ↗
75. Ebsd study of strain dependent microstructure evolution during hot deformation of a typical nickel-based superalloy10.1557/jmr.2018.393 ↗
76. Mechanistic origin of orientation-dependent substructure evolution in aluminum and aluminum-magnesium alloys10.1007/s11661-022-06698-y ↗
77. Study of grain boundary orientation gradients through combined experiments and strain gradient crystal plasticity modeling10.1016/j.ijplas.2022.103360 ↗
78. On the widths of orientation gradient zones adjacent to grain boundaries10.1016/j.scriptamat.2009.03.062 ↗
79. Effects of microstructures on fatigue crack initiation and short crack propagation at room temperature in an advanced disc superalloy10.1016/j.msea.2015.05.065 ↗
80. A review of strain analysis using electron backscatter diffraction10.1017/S1431927611000055 ↗
81. In situ ebsd observations of the evolution in crystallographic orientation with deformation10.1007/s11837-016-2084-x ↗
82. Gregory D. Sjaardema Sandia engineering analysis code access system v. 2.0. 1. Technical report, Sandia National Lab.(SNL-NM), Albuquerque, NM (United States), 2017.
83. Secondary recrystallization in copper10.1007/BF03398387 ↗
84. The structure of high-angle grain boundaries10.1016/0001-6160(66)90168-4 ↗
85. Grain-scale experimental validation of crystal plasticity finite element simulations of tantalum oligocrystals10.1016/j.ijplas.2014.05.004 ↗
86. Quantitative comparison between experimental measurements and cp-fem predictions of plastic deformation in a tantalum oligocrystal10.1016/j.ijmecsci.2014.12.010 ↗
87. Thermo-mechanical deformation evolution in polycrystalline ni-based superalloys by a hierarchical crystal plasticity model10.1080/09603409.2016.1190147 ↗
88. The influence of vacancies diffusion-induced dislocation climb on the creep and plasticity behaviors of nickel-based single crystal superalloy10.1016/j.commatsci.2014.12.035 ↗
89. G.E. Dieter.Mechanical metallurgy (2001).SI Metric Edition, 1988.
90. Temperature-dependent deformation behavior of γ and γ′ single-phase nickel-based superalloys10.1016/j.msea.2021.141439 ↗
91. Correlative characterization and plasticity modeling of microscopic strain localizations in a dual phase steel10.1016/j.matchar.2023.112704 ↗
92. Modeling the evolution of crystallographic dislocation density in crystal plasticity10.1016/S0022-5096(01)00134-X ↗