journal article·2023-12

Simultaneous regulation of strength and ductility of laser powder bed fusion manufactured Haynes 230 alloy

Wenjie Liu, Hui Li, Zhenshen Deng, Kai Guo, Yicang Huang, Wei Wei, Changhui Song

Publisher page

Abstract

Haynes 230 alloy is widely used in aero-engines with high strength, fatigue resistance, oxidation resistance and other properties. However, the powder metallurgy process limits its application due to hot cracks and low strength. In this work, crack inhibition and mechanical properties improvement of the laser powder bed fusion ( L -PBF) manufactured Haynes 230 alloy using 25 groups of different laser energy densities and scanning strategies were investigated. Results show that the high density, nearly crack-free, fine microstructure, and excellent strength and ductility were achieved by a laser energy density of 59.4 J/mm 3 and rotation angle of 90° for the L-PBF manufactured Haynes 230 alloy. The microstructure was composed of γ matrix, carbides (M 6C, M 23C 6), and La 2O 3 nanoparticles. Interestingly, many carbides were found to be mainly uniformly distributed at the grain or sub-grain boundaries with the following orientation relation: [011] γ//[011] M23C6 . Simultaneously, by adjusting laser energy density and scanning strategy, the liquid film, low-melting eutectic phase, hot stress concentration, and high-angle grain boundaries (HAGBs) were suppressed, and the hot cracks were reduced. In addition, yield strength and ultimate tensile strength enhancement of the L -PBF manufactured Haynes 230 alloy was attributed to the synergistic effect of solid solution strengthening, dislocation strengthening, Orowan strengthening, and grain refinement. Whereas ductility enhancement was the main effect of defect inhibition, grain refinement, and nanoprecipitate. This work has verified the feasibility of crack inhibition and mechanical properties improvement of the L -PBF manufactured Haynes 230 alloy by various laser energy densities and scanning strategies.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Effect of thermal exposure on the stability of carbides in Ni-Cr-W based superalloy10.1016/j.msea.2010.11.088 ↗
2. Microstructure and mechanical properties of carbides reinforced nickel matrix alloy prepared by selective laser melting10.3390/ma14174792 ↗
3. Comprehensive study on the formation of grain boundary serrations in additively manufactured Haynes 230 alloy10.1016/j.matchar.2019.110092 ↗
4. Evolution of crystallographic orientation and microstructure in the triangular adapter of grain continuator of a 3rd-generation single crystal superalloy casting during directional solidification10.1016/j.jallcom.2021.162782 ↗
5. Wear patterns and mechanisms of sialon ceramic end-milling tool during high speed machining of nickel-based superalloy10.1016/j.ceramint.2020.10.155 ↗
6. Influence of post heat treatments on anisotropy of mechanical behaviour and microstructure of Hastelloy-X parts produced by selective laser melting10.1016/j.msea.2016.04.086 ↗
7. Additive manufacturing of structural materials10.1016/j.mser.2020.100596 ↗
8. Material-structure-performance integrated laser-metal additive manufacturing10.1126/science.abg1487 ↗
9. Mesoscopic evolution of molten pool during selective laser melting of superalloy Inconel 738 at elevating preheating temperature
10. Cracking inhibition of nano-TiC reinforced René 104 superalloy fabricated by selective laser melting10.1016/j.jallcom.2021.160413 ↗
11. In-situ and ex-situ comparison of oxidation of Inconel 718 manufactured by selective laser melting and conventional methods up to 650 °C10.1016/j.apsusc.2021.151037 ↗
12. Hot isostatic pressing of IN718 components manufactured by selective laser melting
13. Scanning strategies for texture and anisotropy tailoring during selective laser melting of TiC/316L stainless steel nanocomposites10.1016/j.jallcom.2017.08.022 ↗
14. Healing cracks in selective laser melting by 3D laser shock peening
15. The effect of subsequent heat treatment on the evolution behavior of second phase particles and mechanical properties of the Inconel 718 superalloy manufactured by selective laser melting10.1016/j.msea.2020.139931 ↗
16. Anisotropic thermal conductivity of nickel-based superalloy CM247LC fabricated via selective laser melting10.3390/app11114843 ↗
17. Investigation of strengthening mechanisms in an additively manufactured Haynes 230 alloy10.1016/j.actamat.2021.117404 ↗
18. Influence of the TiB2 content on the processability, microstructure and high-temperature tensile performance of a Ni-based superalloy by laser powder bed fusion10.1016/j.jallcom.2022.164656 ↗
19. New alloy design approach to inhibiting hot cracking in laser additive manufactured nickel-based superalloys10.1016/j.actamat.2023.118736 ↗
20. Experimental investigation of laser scan strategy on the microstructure and properties of Inconel 718 parts fabricated by laser powder bed fusion10.1016/j.matchar.2022.111765 ↗
21. Grain refinement and crack inhibition of hard-to-weld Inconel 738 alloy by altering the scanning strategy during selective laser melting10.1016/j.matdes.2021.109940 ↗
22. Duplex strengthening via SiC addition and in-situ precipitation in additively manufactured composite materials10.1016/j.compositesb.2022.109820 ↗
23. Stress and deformation evaluations of scanning strategy effect in selective laser melting
24. Numerical simulation on metallic additive manufacturing
25. Geometric consideration of support structures in part overhang fabrications by electron beam additive manufacturing10.1016/j.cad.2015.06.007 ↗
26. Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy10.1016/j.actamat.2014.05.039 ↗
27. Effects of substrate crystallographic orientations on crystal growth and microstructure formation in laser powder deposition of nickel-based superalloy10.1016/j.actamat.2014.12.046 ↗
28. Evolution of multi pores in Ti6Al4V/AlSi10Mg alloy during laser post-processing10.1016/j.matchar.2021.111109 ↗
29. Laser powder bed fusion of Hastelloy X: Effects of hot isostatic pressing and the hot cracking mechanism10.1016/j.msea.2018.07.008 ↗
30. Hot cracking behavior and mechanism of the IC10 directionally solidified superalloy during laser re-melting10.1016/j.vacuum.2020.109563 ↗
31. Hot cracking behavior and mechanism of a third-generation Ni-based single-crystal superalloy during directed energy deposition
32. Strength-plasticity transition mechanism after the solution treatment of GH3230 superalloy fabricated via laser powder bed fusion10.1016/j.msea.2023.145124 ↗
33. Effects of micrometer-sized TiB2 on crack mitigation, mechanical and electrochemical performance of a Ni-based alloy fabricated by selective laser melting10.1016/j.optlastec.2021.107240 ↗
34. Effect of scanning strategy on mechanical properties of selective laser melted Inconel 71810.1016/j.msea.2019.03.007 ↗
35. Microstructures and mechanical properties of GTD222 superalloy fabricated by selective laser melting10.1016/j.msea.2020.140668 ↗
36. Graphene-strengthened inconel 625 alloy fabricated by selective laser melting10.1016/j.msea.2020.140099 ↗
37. Additively manufactured Ni-15Fe-5Mo permalloy via selective laser melting and subsequent annealing for magnetic-shielding structures: process, microstructural and soft-magnetic characteristics10.1016/j.jmmm.2019.165754 ↗
38. Effect of heat treatment on microstructure and properties of FGH4096M superalloy processed by selective laser melting10.1007/s12540-019-00467-0 ↗
39. Research on heat-treatment for cold-rolled sheet of GH3230 alloy
40. A comparison of weldability, structure, and mechanical properties of CM64 and tribaloy T-800 welds for hard-facing ofturbine blades10.1115/1.4047142 ↗
41. Atomic-scale grain boundary engineering to overcome hot-cracking in additively-manufactured superalloys10.1016/j.actamat.2019.07.041 ↗
42. Additive manufacturing of Sc microalloyed René 104 superalloy: powder properties and cracking elimination10.1016/j.apt.2022.103430 ↗
43. Modeling solid solution strengthening in nickel alloys10.1007/s11661-997-0268-2 ↗
44. Grain-anisotropied high-strength Ni6Cr4WFe9Ti high entropy alloys with outstanding tensile ductility
45. Knowledge of process-structure-property relationships to engineer better heat treatments for laser powder bed fusion additive manufactured Inconel 718
46. Overcoming the strength-ductility trade-off in an additively manufactured CoCrFeMnNi high entropy alloy via deep cryogenic treatment
47. A new class of alumina-forming superalloy for 3D printing
48. Simultaneous enhancement of strength, ductility, and hardness of TiN/AlSi10Mg nanocomposites via selective laser melting
49. Mechanical properties and strengthen-toughening mechanism of 1470 MPa grade dual-phase steel
50. Additively manufactured high-performance AZ91D magnesium alloys with excellent strength and ductility via nanoparticles reinforcement, Addit. Manuf., 69 (2023) 103550. https://doi.org/10.1016/j.addma.2023.103550.10.1016/j.addma.2023.103550 ↗
51. Bifunctional nanoprecipitates strengthen and ductilize a medium-entropy alloy10.1038/s41586-021-03607-y ↗