Distribution of microstructure, elastic modulus and residual stress near the interface in laser repaired GH4169 superalloy
Source abstract
Abstract
As an emerging additive manufacturing technology, Direct Energy Deposition (DED) shows great potential for repairing or remanufacturing high-value components, such as aero-engine turbine blades . Through the utilization of Direct Laser Deposition (DLD), a specific form of DED, GH4169 superalloy powder can be cladded onto a GH4169 substrate to mimic the repairing of aerospace components. The microstructure, mechanical properties, and their distribution characteristics near the interface under different DLD process parameters are comprehensively studied. Combining Electron Backscatter Diffraction (EBSD), data stitching technique, and first-principles, the grain orientation and the elastic stiffness matrix of each phase are determined, based on which the distribution of elastic modulus and residual stress in a relatively large and complex area are analyzed. The results indicate that the DLD process parameters, such as linear energy density, significantly affect the grain size, grain growth direction and residual stress, but much less on the elastic modulus. Furthermore, the microstructure presents significant nonuniformity near the interface, and the elastic modulus presents anisotropy at the microscale, but almost isotropy at the macroscale, without noticeable value differences among the cladding zone, the heat-affected zone (HAZ) and the substrate. This study could shed light on the DLD process optimization for improving the microstructure and mechanical properties of laser-repaired components.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Aerospace applications of laser additive manufacturing
2. Advanced high pressure turbine blade repair technologies
3. Process development for tip repair of complex shaped turbine blades with IN71810.1016/j.promfg.2020.04.114 ↗
4. Influence of the laser source pulsing frequency on the direct laser deposited Inconel 718 thin walls
5. Stress rupture properties of GH4169 superalloy10.1016/j.jmrt.2014.03.003 ↗
6. Laser metal fusion, laser metal deposition, and laser hardening: a review10.3103/S1068798X20040206 ↗
7. Machinability of nickel based superalloys: a review
8. Work-Hardening Behavior of the Ni-Fe Based Superalloy IN71810.1007/s11661-007-9375-3 ↗
9. Multiaxial high-cycle fatigue criteria and life prediction: Application to gas turbine blade10.1016/j.ijfatigue.2016.06.024 ↗
10. Minor cutting edge-workpiece interactions in drilling of an advanced nickel-based superalloy10.1016/j.ijmachtools.2009.01.012 ↗
11. Probabilistic evaluation on fatigue crack growth behavior in nickel based GH4169 superalloy through experimental data10.1016/j.engfracmech.2018.03.019 ↗
12. Flow behavior and microstructures of superalloy 718 during high temperature deformation10.1016/j.msea.2008.07.046 ↗
13. Low cycle fatigue and creep-fatigue interaction behavior of nickel-base superalloy GH4169 at elevated temperature of 650 degrees C10.1016/j.msea.2015.12.096 ↗
14. Effect of δ phase on mechanical properties of GH4169 alloy at room temperature10.1016/S1006-706X(15)30068-6 ↗
15. Constitutive equation of GH4169 superalloy and microstructure evolution simulation of double-open multidirectional forging10.3390/met9111146 ↗
16. An innovative annealing treatment method and its mechanism to refine deformed mixed grains of initial aged GH4169 superalloy10.1016/j.jallcom.2022.164325 ↗
17. Preparation and mechanical properties of ultra-high strength superalloy fibers10.1016/j.jallcom.2023.170930 ↗
18. An overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control
19. Fourier-series-based virtual fields method combining with moire interferometry for characterising elastic modulus distribution of laser repaired GH4169
20. Anisotropic properties of directed energy deposition (DED)-processed Ti–6Al–4V10.1016/j.jmapro.2016.06.020 ↗
21. Correlative Synchrotron X-ray Imaging and Diffraction of Directed Energy Deposition Additive Manufacturing10.1016/j.actamat.2021.116777 ↗
22. In situ monitoring of direct laser metal deposition of a nickel-based superalloy using infrared thermography10.1007/s00170-020-06344-0 ↗
23. Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties10.1016/j.jallcom.2013.09.171 ↗
24. The tensile deformation behavior of laser repaired Inconel 718 with a non-uniform microstructure10.1016/j.msea.2017.01.110 ↗
25. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
26. Input error sensitivity of hardness and elastic modulus evaluated from indentation load-displacement records by Oliver and Pharr method10.1023/B:JMSC.0000013874.41039.55 ↗
27. Investigation on gamma ' to gamma '' transition in an IN718G superalloy during heat treatment, using first principle10.1016/j.matchar.2020.110168 ↗
28. Imaging and characterization of gamma ' and gamma '' nanoparticles in Inconel 718 by EDX elemental mapping and FIB-SEM tomography10.1016/j.matchar.2014.12.012 ↗
29. Intensity anomalies in the X-ray diffraction pattern of Ni3Nb and their relationship to those for martensite
30. The structure and paramagnetism of NI3NB
31. Band structure and itinerant magnetism in quantum critical NbFe2
32. A synergistic reinforcement of Re and W for ideal shear strengths of γ′-Ni3Al phases10.1016/j.jpcs.2019.03.016 ↗
33. Quantitative Studies of Machining-Induced Microstructure Alteration and Plastic Deformation in AISI 316 Stainless Steel Using EBSD10.1007/s11665-018-3129-9 ↗
34. An EBSD Study of the Deformation of Service-Aged 316 Austenitic Steel10.1007/s11661-013-1787-7 ↗
35. A statistical study of the relationship between plastic strain and lattice misorientation on the surface of a deformed Ni-based superalloy10.1016/j.actamat.2020.05.029 ↗
36. A review of strain analysis using electron backscatter diffraction10.1017/S1431927611000055 ↗
37. VASPKIT: A user-friendly interface facilitating high-throughput computing and analysis using VASP code10.1016/j.cpc.2021.108033 ↗
38. Investigation of the mechanical properties of Mn15Si26 via EBSD-nanoindentation coupling and ab-initio calculation
39. Elastic properties of face-centred cubic Fe-Mn-C studied by nanoindentation and ab initio calculations10.1016/j.actamat.2012.07.038 ↗
40. Additive manufacturing of metals: Microstructure evolution and multistage control10.1016/j.jmst.2021.06.011 ↗
41. The microstructure evolution and precipitation behavior of TiB2/Inconel 718 composites manufactured by selective laser melting10.1016/j.jmapro.2022.04.070 ↗