journal article·2023-12

Effect of Nb content on mechanical reinforcement of the Cu-10Fe composites

Yanjun Ding, Zixuan Deng, Zhu Xiao, Mei Fang, Shen Gong, Wenting Qiu, Xu Wang

Publisher page

Abstract

The Cu-10Fe-based composites with different Nb content were fabricated by vacuum mold casting. The effect of Nb content on the solidification behavior and microstructure was investigated systematically and the optimal composition was determined as Cu-10Fe-1.0 Nb (wt%). The as-cast samples were rolled by 90% reduction at room and then aged at 250 ℃ for different time. The properties results showed that, after aging for 1800 min, microhardness, tensile strength and elongation of the Cu-10Fe-1.0 Nb samples reached 145 HV, 553 MPa and 21.5%, respectively. The microstructure results showed that the primary Fe-rich phases in the Cu-10Fe-1.0 Nb samples were significantly refined due to the heterogeneous nucleation induced by Fe 2Nb phases, and then led to the refinement of the matrix. The enhanced mechanical properties could be attributed to the Orowan strengthening, refinement strengthening and work hardening resulted from the numerous submicron-/nano-sized Fe particles, fine sub-grains and high-density dislocation in the matrix formed during thermo-mechanical treatment.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Influence of minor Ag addition on the microstructure and properties of powder metallurgy Cu-10 wt% Fe alloy10.1016/j.jallcom.2022.163983 ↗
2. Hierarchical microstructure and strengthening mechanism of Cu-36.8Fe alloy manufactured by selective laser melting10.1016/j.jallcom.2021.162701 ↗
3. Microstructure evolution and deformation behaviour of Cu-10 wt%Fe alloy during cold rolling10.1016/j.msea.2020.140379 ↗
4. Microstructure and properties of Cu-10 wt%Fe alloy produced by double melt mixed casting and multi-stage thermomechanical treatment10.1016/j.jallcom.2019.153323 ↗
5. Microstructure evolution during the liquid-liquid phase transformation of Al-Bi alloys under the effect of TiC particles10.1016/j.actamat.2017.02.071 ↗
6. Nucleation determined microstructure formation in immiscible alloys10.1016/j.matlet.2008.04.070 ↗
7. Effect of Rare-Earth ce on macrosegregation in Al-Bi immiscible alloys10.3390/met6080177 ↗
8. Unveiling the mechanisms for Si addition on solidification microstructure and properties of Cu-Fe alloy
9. Comparative study of the influence of Ag on the microstructure and mechanical properties of Cu-10Fe in situ composites10.1016/j.jallcom.2015.05.252 ↗
10. Effect of Mg addition on Fe phase morphology, distribution and aging kinetics of Cu-6.5Fe alloy10.1016/j.msea.2021.141064 ↗
11. Grain refinement and mechanical properties enhancement of Cu-10wt% Fe alloys via Zr addition10.1016/j.msea.2022.143309 ↗
12. Effect of Zr addition on metastable liquid-liquid phase separation of Cu-Fe alloys10.1016/j.scriptamat.2021.114218 ↗
13. A multiphase strengthened Cu-Nb-Si alloy with high strength and high conductivity10.1016/j.matchar.2021.111565 ↗
14. Microstructure evolution in nanocrystalline Cu-Nb alloy during mechanical alloying
15. Microstructure and mechanical properties of a Cu-Fe-Nb alloy with a high product of the strength times the elongation
16. A study on the micro-evolution of mechanical property and microstructures in (Cu-30Fe)-2X alloys with the addition of minor alloying elements10.1016/j.jallcom.2019.01.169 ↗
17. Microstructure and mechanical properties of multi-scale α-Fe reinforced Cu-Fe composite produced by vacuum suction casting
18. Novel insight into evolution mechanism of second liquid-liquid phase separation in metastable immiscible Cu-Fe alloy10.1016/j.matdes.2018.06.044 ↗
19. Effects of carbon element on the formed microstructure in undercooled Cu-Fe-C alloys10.1016/j.jallcom.2020.154285 ↗
20. Liquid-phase thermodynamics and structures in the Cu-Nb binary system10.1088/0965-0393/21/2/025005 ↗
21. Thermodynamic assessment of the Fe–Nb–V system10.1016/j.calphad.2013.05.002 ↗
22. Preparation and microstructure of in situ CaB6–Al4Ca/Al composite inoculant ribbon and its refining and modifying effect on Al–10Si–0.3 Mg alloy10.1002/adem.201800687 ↗
23. Microstructural, mechanical, and damping properties of a Cu-based shape memory alloy refined by an in situ LaB 6/Al inoculant10.1007/s11661-019-05153-9 ↗
24. Diffraction analysis of α-Fe precipitates in a polycrystalline Cu–Fe alloy10.1016/j.matchar.2015.05.012 ↗
25. A new strategy for designing immiscible medium-entropy alloys with excellent tensile properties10.1016/j.actamat.2020.03.050 ↗
26. Extra strengthening in a coarse/ultrafine grained laminate: role of gradient interfaces10.1016/j.ijplas.2019.07.019 ↗
27. Structural evolution and validity of hall-petch relationship in an Al-3% Mg alloy with submicron grain size10.4028/www.scientific.net/MSF.204-206.431 ↗
28. Renormalized energy for dislocations in quasi-crystals10.1016/j.na.2017.02.018 ↗
29. Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 410 stainless steel filler metal10.1016/j.msea.2022.144025 ↗
30. Microstructure and mechanical properties of gas metal arc welded CoCrFeMnNi joints using a 308 stainless steel filler metal10.1016/j.scriptamat.2022.115053 ↗
31. A precipitation-hardened high-entropy alloy with outstanding tensile properties10.1016/j.actamat.2015.08.076 ↗
32. Formation mechanisms of self-organized core/shell and core/shell/corona microstructures in liquid droplets of immiscible alloys10.1016/j.actamat.2012.10.033 ↗
33. Comparison of microstructure and mechanical properties of A356 aluminum alloy/Al2O3 composites fabricated by stir and compo-casting processes10.1016/j.matdes.2011.07.037 ↗