Significantly improved ablation properties under high heat flux environment based on carbon fiber reinforced Zr-doped silicone rubber
Source abstract
Abstract
In order to improve the ablative properties of silicone-rubber (SR) based ablative coatings under high heat flow, firm char layer required to be formed during ablation. Herein, Zr-doped SR composites with significantly improved ablation properties were prepared by co-blending synthesized zirconium-doped polydimethylsiloxane and short-cut carbon fibers (Zr-PDMS-CF). Compared to carbon fiber modified pure polydimethylsiloxane (PDMS-CF) and ZrO 2-modified PDMS-CF (ZrO 2 @PDMS-CF), the mass ablation rates were decreased by 28.96% and 28.53%, respectively, and the linear ablation rates were decreased by 47.88% and 38.20%, respectively. Compared to PDMS-CF and ZrO 2 @PDMS-CF, the compressive strength of char layer of Zr-PDMS-CF was also significantly enhanced. In addition to the well distribution of t-ZrO 2 crystals in the char layer of Zr-PDMS-CF, the homogeneous distribution of zirconium elements was also beneficial to protect CFs skeleton from severe oxidation. The char layer of Zr-PDMS-CF thus possessed the ability to resist erosion under high heat flow, protecting underneath materials from further oxidation and erosion.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Dynamics and Kinetic Theory · Diamond and Carbon-based Materials Research · Plasma and Flow Control in Aerodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Recent developments in elastomeric heat shielding materials for solid rocket motor casing application for future perspective10.1002/pat.4101 ↗
2. Science and technology of polymeric ablative materials for thermal protection systems and propulsion devices: a review10.1016/j.pmatsci.2016.08.003 ↗
3. Advances in ablative composites of carbon based materials: a review10.1021/acs.iecr.9b04625 ↗
4. Microstructure and ablation behavior of an affordable and reliable nanostructured Phenolic Impregnated Carbon Ablator (PICA)10.1016/j.polymdegradstab.2017.05.017 ↗
5. Silicone-grafted epoxy/carbon fiber composites with superior mechanical/ablation performance10.1016/j.matchemphys.2021.125283 ↗
6. Effect of mesophase pitch incorporation on the ablation behavior and mechanism of phenolic composites10.1021/acs.iecr.2c00367 ↗
7. Ablation resistance of resin matrix composites modified with different MAX-phase materials10.1016/j.compscitech.2022.109687 ↗
8. Ablation and thermo-mechanical investigation of short carbon fiber impregnated elastomeric ablatives for ultrahigh temperature applications10.1016/j.polymdegradstab.2014.08.032 ↗
9. Effects of carbon nanotubes on char structure and heat transfer in ethylene propylene diene monomer composites at high temperature10.1016/j.compscitech.2021.108852 ↗
10. Thermal insulation and char layer mechanical properties of a novel ethylene propylene diene monomer composite reinforced with carbon nanotubes coated via chemical vapour deposition10.1016/j.compscitech.2020.108537 ↗
11. Synergetic effects of Kevlar fibers and polyimide powder fillers on performances of Poly(diaryloxyphosphazene) based elastomeric heat shielding materials10.1016/j.compscitech.2022.109439 ↗
12. Ablation performance and characterization of thermoplastic polyurethane elastomer nanocomposites10.1016/j.compositesa.2012.08.017 ↗
13. Promoted ablation resistance of polydimethylsiloxane via crosslinking with multi-ethoxy POSS10.1016/j.compositesb.2020.107901 ↗
14. Ceramization and oxidation behaviors of silicone rubber ablative composite under oxyacetylene flame10.1016/j.ceramint.2012.07.109 ↗
15. Shear ablation behavior and mechanism of liquid silicone rubber composites at different ablation angles and distances10.1021/acs.iecr.2c03003 ↗
16. Ordered graphitized ceramic layer induced by liquid crystal epoxy resin in silicone rubber composites with enhanced ablation resistance performance10.1016/j.matchemphys.2021.124823 ↗
17. Understanding the role of carbon fiber skeletons in silicone rubber-based ablative composites10.3390/polym14020268 ↗
18. Improved ablation resistance of silicone rubber composites by introducing montmorillonite and silicon carbide whisker10.3390/ma9090723 ↗
19. Silicone rubber ablative composites improved with zirconium carbide or zirconia10.1016/j.compositesa.2012.09.002 ↗
20. Thermal protection characteristics of polydimethylsiloxane-organoclay nanocomposite10.1016/j.polymdegradstab.2017.08.026 ↗
21. Ablative properties and mechanisms of hot vulcanised silicone rubber (HVSR) composites containing different fillers10.1080/14658011.2016.1243507 ↗
22. Effects of zirconium silicide on the vulcanization, mechanical and ablation resistance properties of ceramifiable silicone rubber composites10.3390/polym12020496 ↗
23. The effects of phosphorus-based flame retardants and octaphenyl polyhedral oligomeric silsesquioxane on the ablative and flame-retardation properties of room temperature vulcanized silicone rubber insulating composites10.1016/j.polymdegradstab.2015.12.007 ↗
24. Enhanced flexibility and ablative performance of silicone rubber by constructing an interpenetrating zirconium-containing polysiloxane double network10.1016/j.polymer.2023.125749 ↗
25. Effect of the constituent networks of double-network gels on their mechanical properties and energy dissipation process10.1039/D0SM01057J ↗
26. Chemisorption and thermally induced transformations of polydimethylsiloxane on the surface of nanoscale silica and ceria/silica10.1016/j.polymdegradstab.2015.07.004 ↗
27. Preparation and properties of ceramifiable flame-retarded silicone rubber composites10.1007/s10973-017-6448-4 ↗
28. Significantly improving the thermal stability and dispersion morphology of polyhedral oligomeric silsesquioxane/polysiloxane composites by in-situ grafting reaction10.1016/j.polymer.2013.03.061 ↗
29. Remarkable improvement of organic-to-inorganic conversion of silicone rubber at elevated temperature through platinum-nitrogen catalytic system10.1016/j.polymdegradstab.2019.109026 ↗
30. Efficient organic-to-inorganic conversion of polysiloxane by novel platinum-thiol catalytic system10.1016/j.polymdegradstab.2020.109161 ↗
31. Mesophase pitch modified silicone rubber coatings with fence-like ceramic layer structures and excellent ablation resistance performance
32. A novel B–Si–Zr hybridized ceramizable phenolic resin and the thermal insulation properties of its fiber-reinforced composites10.1016/j.ceramint.2022.10.006 ↗
33. Influence of carbon preform density on the microstructure and ablation resistance of CLVD-C/C-ZrC-SiC composites10.1016/j.corsci.2021.109648 ↗
34. Initial sintering stage pore growth mechanism applied to the manufacture of ceramic membrane supports10.1016/S0955-2219(03)00643-5 ↗
35. Microstructure characterization of in situ synthesized porous Si2N2O ceramics using spodumene additive10.1016/j.ceramint.2012.10.224 ↗
36. Multi-phase SiZrOC nanofibers with outstanding flexibility and stability for thermal insulation up to 1400 °C10.1016/j.cej.2020.128304 ↗
37. Polymer derived ZrO2 reinforced SiC-ZrB2 polycrystalline fiber10.1016/j.jeurceramsoc.2022.03.042 ↗
38. Molecular design for thermally stable SiZrBOC structure from single source precursor with high ceramic yield10.1016/j.jeurceramsoc.2021.12.002 ↗
39. Effects of zirconium source and content on zirconia crystal form, microstructure and mechanical properties of ZTM ceramics10.1016/j.ceramint.2021.03.327 ↗