journal article·2023-11

Comparative study of the densification kinetics of the FCC phase Al0.3CoCrFeNi and BCC phase AlCoCrFeNi high-entropy alloys during spark plasma sintering

Siyao Xie, Yafei Pan, Yaozhen Fan, Teichui Yuan, Ruidi Li

Publisher page

Abstract

The densification kinetics of the FCC-matrix Al 0.3 CoCrFeNi and BCC-matrix AlCoCrFeNi HEAs at sintering temperatures ranging from 950 ℃ to 1050 ℃ are comparatively studied utilizing the steady-state creep model. The densification activation energy of the Al 0.3CoCrFeNi and AlCoCrFeNi powder in their low-stress exponent stage is linearly fitted to be 264.91 and 220.99 kJ/mol, respectively. The densification mechanism of both the two HEAs in the low-stress exponent stage is proved to be atomic diffusion. However, the densification activation of the Al 0.3CoCrFeNi in the high-stress exponent stage increases to 554.77 kJ/mol and the densification mechanism changes to creep. The densification activation energy of the AlCoCrFeNi in its high-stress exponent stage cannot be obtained by linear fitting because of the abnormal increase of the stress exponent at the sintering temperature of 1050 ℃. The BCC-FCC transformation in the AlCoCrFeNi reduces its creep resistance because of different deformation behavior in BCC (dislocation cell) and FCC phase (cross-glide and twinning). As a result, dislocation density is higher in the FCC phase (4.3 ×10 13/m 2) compared with the BCC phase (3.8 ×10 13/m 2 ), which benefits the densification in the creep-controlled high-stress exponent stage. Furthermore, the stronger electromigration effect induced by a higher heating rate is demonstrated to further reduce the densification activation energy from 124.20 to 72.53 kJ/mol and accelerate densification in the diffusion-controlled heating period.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Viscous flow activation energy adaptation by isothermal spark plasma sintering applied with different current mode
2. Direct current-enhanced densification kinetics during spark plasma sintering of tungsten powder10.1016/j.scriptamat.2017.09.009 ↗
3. Effect of low-melting-point sintering aid on densification mechanisms of boron carbide during spark plasma sintering
4. High-entropy alloys fabricated via powder metallurgy. A critical review10.1080/00325899.2019.1584454 ↗
5. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
6. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
7. New multiphase compositionally complex alloys driven by the high entropy alloy approach10.1016/j.matchar.2018.06.036 ↗
8. High entropy alloys: A focused review of mechanical properties and deformation mechanisms10.1016/j.actamat.2019.12.015 ↗
9. A novel high-entropy alloy with multi-scale precipitates and excellent mechanical properties fabricated by spark plasma sintering10.1016/j.apt.2022.103520 ↗
10. Microstructural and mechanical properties of NiCoCrAlSi high entropy alloy fabricated by mechanical alloying and spark plasma sintering10.1016/j.jallcom.2021.163041 ↗
11. Microstructure and mechanical properties of AlCoCrFeNi2.1 eutectic high-entropy alloy synthesized by spark plasma sintering of gas-atomized powder10.1016/j.intermet.2022.107523 ↗
12. Microstructures and mechanical properties of mechanically alloyed and spark plasma sintered Al0.3CoCrFeMnNi high entropy alloy10.1016/j.matchemphys.2017.09.013 ↗
13. Effect of process control agents on mechanically alloyed Al0.3CoCrFeNi10.1016/j.matlet.2021.129618 ↗
14. Accelerated precipitation of the B2 particles and its effect on Al0.3CoCrFeNi high-entropy alloy by electric current assisted annealing10.1016/j.matchar.2021.111434 ↗
15. Effect of phase transformation on densification kinetics and properties of spark plasma sintered Al0.7CoCrFeNi high-entropy alloy
16. Effect of heating rate on microstructure and mechanical properties of AlCoCrFeNi high entropy alloy produced by spark plasma sintering10.1016/j.matchar.2019.05.022 ↗
17. Impact of mechanical activation on sintering kinetics and mechanical properties of ultrafine-grained 95W-Ni-Fe tungsten heavy alloys10.1016/j.jallcom.2018.09.176 ↗
18. Spark plasma sintering of pure tungsten powder: Densification kinetics and grain growth10.1016/j.powtec.2017.01.050 ↗
19. Densification mechanisms and microstructural evolution during spark plasma sintering of boron carbide powders
20. High-entropy alloys by mechanical alloying: A review10.1557/jmr.2019.37 ↗
21. A methodology to investigate the intrinsic effect of the pulsed electric current during the spark plasma sintering of electrically conductive powders10.1088/1468-6996/11/4/045005 ↗
22. Effect of electric current on densification behavior of conductive ceramic powders consolidated by spark plasma sintering10.1016/j.actamat.2017.11.010 ↗
23. Effect of current crowding on vacancy diffusion and void formation in electromigration10.1063/1.125915 ↗
24. Electromigration-induced Coble creep in polycrystalline materials
25. Effect of electromigration on diffusional creep in polycrystalline materials10.3233/JAE-2012-1583 ↗
26. Spark plasma sintering of a commercially available granulated zirconia powder: I. Sintering path and hypotheses about the mechanism(s) controlling densification10.1016/j.actamat.2007.01.048 ↗
27. The influence of the local effect of electric current on densification of tungsten powder during spark plasma sintering10.1016/j.powtec.2019.08.108 ↗
28. Hot-isostatic pressing diagrams: New developments10.1016/0001-6160(85)90177-4 ↗
29. Mechanical Properties of Partially Dense Alumina Produced from Powder Compacts10.1111/j.1151-2916.1994.tb07105.x ↗
30. Effect of pulse current on the diffusion behavior of FeCoCrNiMox–Al couples10.1016/j.matlet.2019.07.004 ↗
31. On sluggish diffusion in FCC Al–Co–Cr–Fe–Ni high-entropy alloys: An experimental and numerical study
32. The influence of Al elements on the structure and the creep behavior of AlxCoCrFeNi high entropy alloys10.1016/j.matlet.2015.11.016 ↗
33. Structural stability of NiCoFeCrAlx high-entropy alloy from ab initio theory10.1103/PhysRevB.88.085128 ↗
34. Bulk tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys10.1016/j.actamat.2017.12.052 ↗
35. Ni tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys10.1016/j.jallcom.2016.07.239 ↗
36. Chou · Microstruct., Thermophys. Electr. Prop. Al x CoCrFeNi ( 0 ≤ x ≤ 2) High. -entropy Alloy. · 2009 · 163 · 184
37. Prediction of high-entropy stabilized solid-solution in multi-component alloys Prediction of high-entropy stabilized solid-solution in multi-component alloys10.1016/j.matchemphys.2011.11.021 ↗
38. Inhibiting cracking and improving strength for additive manufactured AlxCoCrFeNi high entropy alloy via changing crystal structure from BCC-to-FCC
39. Fundamental investigations on the spark plasma sintering/synthesis process: I. Effect of dc pulsing on reactivity10.1016/j.msea.2004.11.020 ↗
40. Pulse analysis and electric contact measurements in spark plasma sintering