journal article·2023-10

Thermal-induced decomposition and mechanical properties of AlN/CrN superlattice coating

Jian W. Du, Zhe R. Liu, Hui J. Liu, Li Chen

Publisher page

Abstract

Here, the thermal-induced decomposition and mechanical properties of AlN/CrN superlattice coating with modulation period of ∼8 nm are investigated in detail. Introduction of CrN template layers stabilizes the cubic growth of AlN layers, where the coherent AlN/CrN coating exhibits the higher hardness value of ∼24.1 GPa than CrN (∼16.9 GPa) and AlN (∼18.5 GPa) monolithic coatings. After thermal exposure, the AlN/CrN coating decomposes into stable body-centered cubic Cr and wurtzite AlN via intermediate phases of hexagonal Cr 2 N and cubic AlN. Especially, the formation of metastable cubic AlN is observed due to the destruction of coherent interfaces. Meanwhile, the thermal load leads to the grain deformation, which causes the change of AlN and CrN sublayers from the crossover to pinch-off to finally dissociation. The driving force of grain deformation mainly arises from the N-loss of CrN sublayers and the high-density stacking faults formation of AlN sublayers. Furthermore, the occurrence of stacking faults and h-Cr 2 N phase offset the softening effect caused by the thermal decomposition. Correspondingly, the hardness almost remains unchanged between 900 and 1100 °C.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. A comparison of tribological and corrosion behavior of PVD-deposited CrN/CrAlN and CrCN/CrAlCN nanostructured coatings10.1016/j.ceramint.2022.10.016 ↗
2. Physico-chemical properties of CrMoN coatings-combined experimental and computational studies10.1016/j.tsf.2019.137671 ↗
3. A holistic analysis of surface, chemical bonding states and mechanical properties of sol-gel synthesized CoZn-oxide coatings complemented by finite element modeling10.1016/j.ceramint.2019.02.167 ↗
4. Microstructure-property relationships in arc-evaporated Cr-N coatings10.1016/S0040-6090(00)01307-9 ↗
5. Mechanical properties of TiN thin film coatings on 304 stainless steel substrates10.1016/S0257-8972(01)01382-2 ↗
6. Microstructure and mechanical/thermal properties of CrN coatings deposited by reactive unbalanced magnetron sputtering10.1016/S0257-8972(01)01090-8 ↗
7. High temperature oxidation of thin CrN coatings deposited on steel10.1116/1.580014 ↗
8. Thermal decomposition routes of CrN hard coatings synthesized by reactive arc evaporation and magnetron sputtering10.1016/j.tsf.2008.06.086 ↗
9. High temperature oxidation of a CrN coating deposited on a steel substrate by ion plating10.1016/S0257-8972(01)01238-5 ↗
10. Oxidation behavior of AlN/CrN multilayered hard coatings10.1186/s40580-017-0109-y ↗
11. Effects of structure and interfaces on fracture toughness of CrN/AlN multilayer coatings10.1016/j.scriptamat.2013.01.039 ↗
12. Nano-structured CrN/AlN multilayer coatings synthesized by pulsed closed field unbalanced magnetron sputtering10.1016/j.surfcoat.2009.04.013 ↗
13. Thick CrN/AlN superlattice coatings deposited by the hybrid modulated pulsed power and pulsed dc magnetron sputtering10.1016/j.surfcoat.2011.11.037 ↗
14. Synthesis of CrN/AlN superlattice coatings using closed-field unbalanced magnetron sputtering process10.1016/S0257-8972(03)00244-5 ↗
15. Oxidation behavior of sputtered CrN/AlN multilayer coatings during heat treatment10.1016/j.surfcoat.2006.07.094 ↗
16. Thermal stability of CrN/AlN superlattice coatings10.1016/j.surfcoat.2013.12.035 ↗
17. Thermal dissolution mechanisms of AlN/CrN hard coating superlattices studied by atom probe tomography and transmission electron microscopy10.1016/j.actamat.2014.11.004 ↗
18. Stability in thin film multilayers and microlaminates: the role of free energy, structure, and orientation at interfaces and grain boundaries10.1016/S1359-6462(02)00629-2 ↗
19. Oxidation behavior, microstructure evolution and thermal stability in nanostructured CrN/AlN multilayer hard coatings10.1016/j.jallcom.2009.09.060 ↗
20. Growth-twins in CrN/AlN multilayers induced by hetero-phase interfaces10.1016/j.actamat.2019.11.063 ↗
21. Structural, mechanical and tribocorrosion behaviour in artificial seawater of CrN/AlN nano-multilayer coatings on F690 steel substrates10.1016/j.apsusc.2017.09.166 ↗
22. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
23. Crystallographic orientation dependent maximum layer thickness of cubic AlN in CrN/AlN multilayers10.1016/j.actamat.2019.02.004 ↗
24. Stabilization of cubic AlN in epitaxial AlN/TiN superlattices10.1103/PhysRevLett.78.1743 ↗
25. Effect of the modulation ratio on the interface structure of TiAlN/TiN and TiAlN/ZrN multilayers: first-principles and experimental investigations10.1016/j.actamat.2017.03.053 ↗
26. Nanometer scale multilayered hard coatings10.1016/S0042-207X(99)00148-7 ↗
27. Effect of grain size on mechanical properties of nanocrystalline materials10.1016/0956-7151(94)00253-E ↗
28. Mechanical properties, thermal stability and oxidation resistance of TiN/CrN multilayer coatings10.1016/j.vacuum.2020.109468 ↗
29. Deposition, structure and hardness of polycrystalline transition-metal nitride superlattice films10.1557/JMR.1999.0335 ↗
30. Model of superlattice yield stress and hardness enhancements10.1063/1.359467 ↗
31. Hall-Petch relations for multilayered materials10.1016/0965-9773(95)00250-I ↗
32. The effects of grain size and porosity on the elastic modulus of nanocrystalline materials10.1016/S0965-9773(99)00052-5 ↗
33. Analysis of relationships between cohesive energy, elastic moduli and lattice parameter of some high temperature intermetallics10.1016/0966-9795(95)92678-S ↗
34. Internal friction in metals10.1016/0502-8205(53)90014-8 ↗
35. Greater improvement of carbon and boron co-doping on the mechanical properties, wear resistance and cutting performance of AlTiN coating than that of doping alone10.1016/j.surfcoat.2020.126738 ↗
36. Phase equilibria and multiphase reaction diffusion in the Cr-C and Cr-N systems10.1361/105497199770335929 ↗
37. Oxidation behavior, thermal stability, and the coating/substrate interface evolution of CrN-coated Zircaloy under high-temperature steam10.1016/j.corsci.2021.109416 ↗
38. Influence of oxygen addition on the structure, mechanical and thermal properties of CrN coating10.1016/j.surfcoat.2021.126992 ↗
39. The occurrence and the crystal structure of α iron nitride; a new type of interstitial alloy formed during the tempering of nitrogen-martensite
40. High thermal stability of TiAlSiCN coatings with “comb” like nanocomposite structure10.1016/j.surfcoat.2012.05.068 ↗
41. Work-hardening behavior and evolution of dislocation-microstructures in high-nitrogen bearing austenitic steels10.2355/isijinternational.38.474 ↗
42. Atomic-scale understanding of the structural evolution in TiN/AlN superlattice during nanoindentation-part 2: strengthening
43. Atomic-scale understanding of the structural evolution of TiN/AlN superlattice during nanoindentation-part 1: deformation
44. Influence of AlN layers on mechanical properties and thermal stability of Cr-based nitride coatings10.1016/j.tsf.2012.12.057 ↗
45. Thermally stable laser cladded CoCrCuFeNi high-entropy alloy coating with low stacking fault energy10.1016/j.jallcom.2014.02.121 ↗
46. Transmission electron microscopy analysis of a TiNx substoichiometric CVD coating
47. Evading stress-property tradeoff in a SMA/PZT laser cladding coating via phase transformations10.1016/j.surfcoat.2022.128313 ↗
48. Microstructural change and phase transformation in each individual layer of a nano-multilayered AlCrTiSiN high-entropy alloy nitride coating upon annealing10.1016/j.apsusc.2018.07.106 ↗
49. Enhancement of thermal and mechanical stabilities of silicon doped titanium nitride coating by manipulation of sputtering conditions10.1016/j.jmrt.2022.01.039 ↗
50. Oxidation resistance of TiN, CrN, TiAlN and CrAlN coatings deposited by lateral rotating cathode arc10.1016/j.tsf.2009.03.038 ↗
51. Characterization of sputter-deposited chromium nitride thin films for hard coatings10.1016/S0257-8972(97)00443-X ↗
52. Formation of high-density stacking faults in ceramic films induced by Ti transition layer10.1016/j.scriptamat.2021.114496 ↗
53. Effects of orientation on microstructure and mechanical properties of TiN/AlN superlattice films10.1016/j.scriptamat.2021.113951 ↗