Microstructure and creep properties of cast hypereutectic Al-11Ce alloy with Si addition
Source abstract
Abstract
This study systematically investigated the as-cast microstructure, heat and creep- resistance of Al-11Ce-xSi (x = 0, 0.9, 1.7 wt%) alloys. A tetragonal AlCeSi intermetallic compound was formed by adding Si. With the increase of Si content, the Chinese-script Al 11Ce 3 /α-Al eutectics changed to rod-like structure and were gradually replaced by broad flaky AlCeSi/α-Al eutectics. The Al-11Ce alloy containing 0.9 wt% Si possessed the optimal tensile properties with an ultimate tensile strength of 129.2 MPa and an elongation of 4.3%, which were 8.4% and 65.4% higher than that of the based alloy, respectively. After aging at 400 ℃ for 1008 h, the microhardness of Si-containing alloys remained unchanged, indicating excellent coarsening resistance of the strengthening AlCeSi phases. Under tensile creep conditions at 300 ℃, the creep deformation of three alloys was the dislocation creep mechanism. Nevertheless, with the addition of 1.7 wt% Si, the steady-state strain rate of Al-11Ce alloy was decreased to 1/3 of its original value. The enhanced creep resistance was mainly attributed to the relatively high volume fraction of intermetallic phase, the reduced volume fraction of coarse primary phase, and the presence of AlCeSi precipitates that effectively hinder dislocations motion.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Thermal stability of Al/Al11Ce3and Al/Al11La3/Al3Ni eutectics obtained by Bridgman growth10.1179/026708399101506346 ↗
2. Enhanced load transfer and ductility in Al–9Ce alloy through heterogeneous lamellar microstructure design by cold rolling and annealing10.1016/j.msea.2021.141591 ↗
3. Casting characteristics of high cerium content aluminum alloys
4. Evaluation of an Al-Ce alloy for laser additive manufacturing10.1016/j.actamat.2016.12.065 ↗
5. Cast near-eutectic Al-12.5wt% Ce alloy with high coarsening and creep resistance10.1016/j.msea.2019.138440 ↗
6. Improved high-temperature aluminum alloys containing cerium10.1007/s11665-019-3884-2 ↗
7. Microstructure diversity dominated by the interplay between primary intermetallics and eutectics for Al-Ce heat-resistant alloys10.1016/j.jallcom.2021.162914 ↗
8. Microstructure and mechanical properties of cast Al-Ce-Sc-Zr-(Er) alloys strengthened by Al11Ce3 micro-platelets and L12 Al3(Sc,Zr,Er) nano-precipitates10.1016/j.actamat.2022.118354 ↗
9. Microstructure and creep properties of cast near-eutectic Al–Ce–Ni alloys10.1016/j.msea.2021.142551 ↗
10. Microstructure and mechanical properties of high performance die cast Al-8Ce-3Y aluminum alloy containing Al4(Ce,Y) phase10.1016/j.matlet.2021.130742 ↗
11. Effect of existing form of alloying elements on the microhardness of Al–Si–Cu–Ni–Mg piston alloy10.1016/j.msea.2011.04.022 ↗
12. Effect of Si addition on the precipitation and mechanical/electrical properties of dilute Al–Zr-Sc alloys10.1016/j.msea.2021.141150 ↗
13. Influence of the interaction between Si and Sc on the microstructure and tensile properties of as casted Al-Si-Sc alloys10.1016/j.jallcom.2022.167650 ↗
14. Elevated temperature tensile properties of a ternary eutectic Al–27%Cu–5%Si cast alloy
15. Thermodynamic modeling of the Al-Ce-Cu-Mg-Si system and its application to aluminum-cerium alloy design10.1007/s11669-020-00852-y ↗
16. Amirkhiz, aluminum cast alloys based on the Al–Ce–Si–Mg system: an influence of silicon on crystallization, phase composition, and tensile properties10.1007/s11661-022-06812-0 ↗
17. Rainer Schmid-Fetzer thermodynamic aspects of the constitution, grain refining, and solidification enthalpies of Al-Ce-Si alloys10.1007/s11661-004-0172-y ↗
18. High performance aluminum-cerium alloys for high-temperature applications10.1039/C7MH00391A ↗
19. The systems Ce–Al–(Si, Ge): phase equilibria and physical properties10.1006/jssc.1997.7660 ↗
20. Eutectic microstructures in dilute Al-Ce and Al-Co alloys10.1016/j.matchar.2019.06.010 ↗
21. Thermal stability of aluminum-cerium binary alloys containing the Al-Al11Ce3 eutectic10.1016/j.msea.2021.140973 ↗
22. On the Al-Al11Ce3 eutectic transformation in aluminum-cerium binary alloys
23. Eutectic evolution of directionally solidified Nb-Si based ultrahigh temperature alloys10.1016/j.ijrmhm.2017.11.001 ↗
24. On the origin of a remarkable increase in the strength and stability of an Al rich Al-Ni eutectic alloy by Zr addition10.1016/j.actamat.2019.03.025 ↗
25. Beneficial effects of Sc/Zr addition on hypereutectic Al–Ce alloys: Modification of primary phases and precipitation hardening10.1016/j.msea.2022.142611 ↗
26. Effects of Eu modification and heat treatment on microstructure and mechanical properties of hypereutectic Al–Mg2Si composites10.1016/j.msea.2021.142227 ↗
27. Ambient- and elevated-temperature strengthening by Al 3 Zr-Nanoprecipitates and Al 3 Ni-Microfibers in a cast Al-2.9Ni-0.11Zr-0.02Si-0.005Er (at%) alloy10.1016/j.msea.2019.05.018 ↗
28. Cast near-eutectic Al-12.5 wt% Ce alloy with high coarsening and creep resistance10.1016/j.msea.2019.138440 ↗
29. L.F. Mondolfo, Aluminum alloys structure and properties, Aluminum alloys structure and properties /, 1976.10.1016/B978-0-408-70932-3.50008-5 ↗
30. Murarka, S.P., Agarwala, R.P., Diffusion of rare earth elements in aluminum, (1968).
31. Compressive creep behavior of a cast Al–15Mg2Si in situ composite10.1016/j.msea.2016.05.058 ↗
32. Creep of Ti–5Al–5Mo–5V–1Fe–1Cr alloy with equiaxed and lamellar microstructures10.1016/j.msea.2015.10.092 ↗
33. The kinetics of dislocation climb over hard particles—II. Effects of an attractive particle-dislocation interaction10.1016/0001-6160(88)90159-9 ↗
34. A.G. Atkins, Deformation-mechanism maps (the plasticity and creep of metals and ceramics): by H.J. Frost and M.F. Ashby, Pergamon, Oxford 1982. ISBN 0–08-029338–7, ix + 166 pages, illustrated, flexicover, US $25, Journal of Mechanical Working Technology, 9 (1984) 224–225.10.1016/0378-3804(84)90015-9 ↗
35. Diffusion of Al26 and Mn54 in aluminum10.1063/1.1728808 ↗
36. adek, Josef, Creep in Metallic Materials, Elsevier, (1988).
37. Aging- and creep-resistance of a cast hypoeutectic Al-6.9Ce-9.3Mg (wt%) alloy10.1016/j.msea.2020.139398 ↗
38. Nanostructural Sc-based hierarchy to improve the creep resistance of Al–Cu alloys10.1016/j.matdes.2019.108309 ↗
39. Solidification microstructure, aging evolution and creep resistance of laser powder-bed fused Al-7Ce-8Mg (wt%)
40. Dislocation structures formation induced by thermal stress in additive manufacturing: Multiscale crystal plasticity modeling of dislocation transport10.1016/j.jmps.2023.105235 ↗
41. Thermal expansion and thermal mismatch stress relaxation behaviors of SiC whisker reinforced aluminum composite10.1016/S0254-0584(02)00172-4 ↗
42. Comparative analysis of thermal stress induced dislocations in 7 kg, 40 kg and 330 kg multi-crystalline silicon ingots grown by directional solidification10.1016/j.jcrysgro.2020.125901 ↗
43. Effect of minor Gd addition on the microstructure and creep behavior of a cast Al–15Mg2Si in situ composite10.1016/j.msea.2018.01.081 ↗
44. Laser-melted Al-3.6Mn-2.0Fe-1.8Si-0.9Zr (wt%) alloy with outstanding creep resistance via formation of α-Al(FeMn)Si precipitates
45. A creep-resistant additively manufactured Al-Ce-Ni-Mn alloy10.1016/j.actamat.2022.117699 ↗