journal article·2023-10Open access

Comparative study of the microstructure and arc erosion resistance of Ag/Ti2AlX (X = C, N) electrical contact materials

DanDan Wang, HongYu Zhu, MengYan Zheng, Qi Tang, Jin Xu, Wei Wei, ChengJie Lu, ZhengMing Sun

Abstract

A group of MAX phases including Ti 2 AlC and Ti 2 AlN, are candidate reinforcements of Ag-based electrical contact materials. In this work, the interfacial reaction, resistivity, hardness and arc erosion resistance of Ag/Ti 2 AlX (X = C, N) were investigated comparatively. During the sintering of both Ag/Ti 2 AlX, Al deintercalated from Ti 2 AlX and Ag diffused into Ti 2 AlX. The interfacial reaction was mild in Ag/Ti 2 AlN while obvious in Ag/Ti 2 AlC. The first-principles calculation indicated that the higher vacancy formation energy of Al in Ti 2 AlN led to the mild reaction in Ag/Ti 2 AlN, which then resulted in a larger decrease in hardness and resistivity, as compared with Ag/Ti 2 AlC. Moreover, Ag/Ti 2 AlN showed superior arc erosion resistance, with less evaporation of Ag and oxidation of Ti 2 AlC. This were attributed to the lower vulnerability of mildly decomposed Ti 2 AlN, less resistance heat and easier heat dissipation, resulting from the superior electrical and thermal conductivity .
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: MXene and MAX Phase Materials · Electrical Contact Performance and Analysis · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Morphology-tunable synthesis and formation mechanism of SnO2 particles and their application in Ag–SnO2 electrical contact materials10.1016/j.ceramint.2021.11.143 ↗
2. Improvement of copper alloy properties in electro-explosive spraying of ZnO-Ag coatings resistant to electrical erosion10.1016/j.jmrt.2019.09.019 ↗
3. Investigation on arc behavior of AgNi electrical contact material with three-dimensional network structure10.1016/j.vacuum.2020.109290 ↗
4. Corrosion, oxidation, erosion and performance of Ag/W-based circuit breaker contacts: a review10.1016/j.corsci.2018.02.010 ↗
5. Tribological behavior and self-lubricating mechanism of Ag-C fiber brushes under air and vacuum conditions
6. From structural ceramics to 2D materials with multi-applications: a review on the development from MAX phases to MXenes10.1007/s40145-021-0535-5 ↗
7. Current research status and outlook of Ag-based contact materials
8. Preparation and arc erosion properties of Ag/Ti2SnC composites under electric arc discharging10.1007/s40145-018-0296-y ↗
9. Ag/Ti3AlC2 composites prepared by equal channel angular pressing followed by heat treatment
10. Corrosion and degradation mechanism of Ag/Ti3AlC2 composites under dynamic electric arc discharging10.1016/j.corsci.2019.05.005 ↗
11. Progress in research and development on MAX phases: a family of layered ternary compounds10.1179/1743280410Y.0000000001 ↗
12. 25th anniversary article: MXenes: a new family of two-dimensional materials10.1002/adma.201304138 ↗
13. Ag/Ti3AlC2 composites with high hardness, high strength and high conductivity10.1016/j.matlet.2017.11.038 ↗
14. Temperature-driven deintercalation and structure evolution of Ag/Ti3AlC2 composites10.1016/j.ceramint.2018.07.019 ↗
15. Comparison of the interfacial reactions and properties between Ag/Ti3AlC2 and Ag/Ti3SiC2 electrical contact materials
16. Layered machinable and electrically conductive Ti2AlC and Ti3AlC2 ceramics: a review10.1016/S1005-0302(10)60064-3 ↗
17. Microstructure, electrical and mechanical properties of Ti2AlN MAX phase reinforced copper matrix composites processed by hot pressing
18. High-purity Ti2AlC powder: preparation and application in Ag-based electrical contact materials
19. Study on arc erosion behavior of a new type of Ag-Ti2AlN electrical contact material
20. First-order Raman scattering of the MAX phases: Ti2AlN, Ti2AlC0.5N0.5, Ti2AlC, (Ti0.5V0.5)2AlC, V2AlC, Ti3AlC2, and Ti3GeC210.1002/jrs.3036 ↗
21. Anisotropic arc erosion resistance of Ag/Ti3AlC2 composites induced by the alignment of Ti3AlC2
22. Erosion behaviour of a Ti3SiC2 cathode under low-current vacuum arc10.1088/0022-3727/46/39/395202 ↗
23. An investigation of atomic interaction between Ag and Ti2AlC under the processing temperature of 1080 °C10.3390/met11121963 ↗
24. An investigation on substitution of Ag atoms for Al or Ti atoms in the Ti2AlC MAX phase ceramic based on first-principles calculations10.3390/ma14227068 ↗
25. Electrical contact and electrical contact materials (2)
26. Electrical contact and electrical contact materials (6)
27. The beauty and the deed of silver during arc erosion of Ag/Ti3AlC2 contacts10.1016/j.jallcom.2019.153136 ↗