journal article·2023-08

Enhanced strength-ductility synergy in NbC-reinforced FeMnCoCr high entropy alloy with heterostructure by adopting a novel process

Qi Wang, Shaoxia Yu, Xiaolin Li, Yanmei Li, Xiangtao Deng, Zhaodong Wang

Publisher page

Abstract

We explored a novel heterostructure design strategy to simultaneously enhance the strength and ductility of NbC-reinforced FeMnCoCr high-entropy alloys by adopting grain-scale strain localization regulation coupling partial recrystallization annealing, and the effect of cold-rolled microstructure on annealed microstructure evolution and mechanical properties was studied. The transformation-induced plasticity (TRIP) effect and the dislocation density decreased as the grain size increased. The significant grain-scale strain localization and obvious Brass and A textures were observed in the cold-rolled microstructure of the large grain samples. Recrystallization preferentially occurred in the high-strain region during annealing leading to heterogeneous recrystallization nucleation. The recrystallization kinetics of A texture was slow and remained in the partially recrystallized microstructure. A heterostructure with a bimodal grain size distribution was formed in coarse-grained samples. The heterostructure with coarse un-recrystallized grains wrapped by recrystallized grains has good comprehensive mechanical properties. Its yield strength was 1.4 times that of a fine-grained microstructure sample, while maintaining excellent strain hardening capacity without decreasing elongation. The high yield strength was attributed to dislocation strengthening. The TRIP effect appeared earlier in the coarse un-recrystallized grains with low dislocation density under tension, and the back stress strengthening and TRIP effect improved the strain hardening capacity.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
3. Decomposition of the single-phase high-entropy alloy CrMnFeCoNi after prolonged anneals at intermediate temperatures10.1016/j.actamat.2016.04.005 ↗
4. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
5. Solid solution or intermetallics in a high‐entropy alloy10.1002/adem.200900057 ↗
6. The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy10.1016/j.actamat.2013.06.018 ↗
7. A TRIP-assisteddual-phase high-entropy alloy: Grain size and phase fraction effects on deformation behavior10.1016/j.actamat.2017.03.069 ↗
8. Effect of grain size on the tensile behavior of V10Cr15Mn5Fe35Co10Ni25 high entropy alloy10.1016/j.msea.2018.12.077 ↗
9. Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy10.1016/j.scriptamat.2012.12.002 ↗
10. Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy10.1016/j.actamat.2018.10.017 ↗
11. Effect of grain size on the strain rate sensitivity of CoCrFeNi high-entropy alloy10.1016/j.msea.2020.139281 ↗
12. Inverse grain-size-dependent strain rate sensitivity of face-centered cubic high-entropy alloy10.1016/j.jmst.2021.01.046 ↗
13. Grain size and temperature effect on the tensile behavior and deformation mechanisms of non-equiatomic Fe41Mn25Ni24Co8Cr2 high entropy alloy10.1016/j.jmst.2019.09.034 ↗
14. Effect of crystal structure and grain size on corrosion properties of AlCoCrFeNi high entropy alloy
15. Grain size dependent deformation behavior of a metastable Fe40Co20Cr20Mn10Ni10 high-entropy alloy10.1016/j.jallcom.2021.160876 ↗
16. Transition of twinning behavior in CoCrFeMnNi high entropy alloy with grain refinement10.1016/j.msea.2017.12.022 ↗
17. Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy10.1016/j.actamat.2016.07.038 ↗
18. The onset of twinning in metals: a constitutive description10.1016/S1359-6454(01)00300-7 ↗
19. The effect of austenite grain size on deformation mechanism of Fe-17Mn steel10.1016/j.msea.2021.140972 ↗
20. In-situ SEM observation of phase transformation and twinning mechanisms in an interstitial high-entropy alloy10.1016/j.actamat.2018.01.036 ↗
21. Microstructure and mechanical properties of in situ (TiC + SiC)/FeCrCoNi high entropy alloy matrix composites10.1007/s42243-020-00472-3 ↗
22. The impact of grain-scale strain localization on strain hardening of a high-Mn steel: Real-time tracking of the transition from the γ→ε→α' transformation to twinning10.1016/j.actamat.2020.07.038 ↗
23. Coupled model for grain rotation, dislocation plasticity and grain boundary sliding in fine-grained solids10.1016/j.ijplas.2020.102776 ↗
24. The enhanced static recrystallization kinetics of a non-equiatomic high entropy alloy through the reverse transformation of strain induced martensite10.1016/j.jallcom.2019.07.105 ↗
25. Synergistic effect of precipitation strengthening and multi-heterostructure on the improvement of strength and ductility in NbC-reinforced FeMnCoCr high entropy alloys10.1016/j.msea.2022.143679 ↗
26. Perspective on hetero-deformation induced (HDI) hardening and back stress10.1080/21663831.2019.1616331 ↗
27. Simultaneous enhancement of strength and ductility through coordination deformation and multi-stage transformation induced plasticity (TRIP) effect in heterogeneous metastable austenitic steel10.1016/j.scriptamat.2018.12.007 ↗