High pressure hydrogen compression exploiting Ti1.1(Cr,Mn,V)2 and Ti1.1(Cr,Mn,V,Fe)2 alloys
Source abstract
Abstract
For metal hydride compressors to be used in substitution to the mechanical ones in the hydrogen infrastructures, it is mandatory to develop new compositions that can satisfy the desired goal of a pressure of 700 bar. To achieve the goal, Laves (C14) intermetallic compounds Ti(Cr,Mn)2-based are very promising. New Ti1.1(Cr,Mn,V)2 and Ti1.1(Cr,Mn,V,Fe)2 compositions were synthetized and characterized in this work. The influence of the substitution of Cr with Mn and Fe on the crystal structure, and its correlation with the hydrogen sorption properties, was investigated, detecting an increment in the plateau pressure and the hysteresis gap. Thanks to suitable thermodynamics, developed alloys are good candidates for the high-pressure hydrogen compression. Moreover, they present an easy activation, that can be performed at room temperature, and a fast reaction rate, with few seconds required to absorb about 90% of the hydrogen content in the alloy. The most promising composition is the Ti1.1Cr0.9Mn0.8V0.1Fe0.2, that is estimated to release hydrogen at about 700 bar at 150 °C. A possible integration of developed alloy in a metal hydride compressor is evaluated
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen Storage and Materials · Catalysis and Hydrodesulfurization Studies · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Topler · 2016
2. Hydrogen refuelling station with integrated metal hydride compressor: layout features and experience of three-year operation10.1016/j.ijhydene.2019.05.133 ↗
3. The energy efficiency of onboard hydrogen storage10.1016/j.jallcom.2007.04.051 ↗
4. Review of the current technologies and performances of hydrogen compression for stationary and automotive applications10.1016/j.rser.2018.11.028 ↗
5. Metal hydride hydrogen compressors: a review10.1016/j.ijhydene.2014.01.158 ↗
6. Application of hydrides in hydrogen storage and compression: achievements, outlook and perspectives10.1016/j.ijhydene.2019.01.104 ↗
7. ScienceDirect HYDRIDE4MOBILITY: An EU HORIZON 2020 project on hydrogen powered fuel cell utility vehicles using metal hydrides in hydrogen storage and refuelling systems
8. Metal hydride hydrogen compression: recent advances and future prospects10.1007/s00339-016-9863-7 ↗
9. GRZ Technologies website, (n.d.). 〈https://grz-technologies.com〉.
10. HYSTORSYS SA website, (n.d.). 〈http://www.hystorsys.no〉.
11. Integrated electrolyser-metal hydride compression system10.1016/j.ijhydene.2005.06.019 ↗
12. Experimental investigation and theoretical modeling of dehydriding process in high-pressure metal hydride hydrogen storage systems10.1016/j.ijhydene.2011.12.140 ↗
13. A 70 MPa hydrogen-compression system using metal hydrides10.1016/j.ijhydene.2011.04.193 ↗
14. Series of metal hydride high pressure hydrogen compressors10.1016/0925-8388(95)01780-1 ↗
15. Isotherm measurements of high-pressure metal hydrides for hydrogen compressors
16. Design, development, construction and operation of a novel metal hydride compressor10.1016/j.ijhydene.2017.03.195 ↗
17. A comparative thermodynamic analysis of gas-solid sorption system based on H2-La0.9Ce0.1Ni5/LaNi4.7Al0.3 and NH3-NaBr/MnCl210.1016/j.egypro.2017.03.047 ↗
18. Performance investigation of a single-stage metal hydride heat transformer10.1080/15435075.2014.892879 ↗
19. Effect of heat transfer enhancement on the performance of metal hydride based hydrogen compressor10.1016/j.ijhydene.2016.01.011 ↗
20. Experimental behaviour of a three-stage metal hydride hydrogen compressor
21. A 38MPa compressor based on metal hydrides, J. Shanghai Jiaotong
22. Investigation on high-pressure metal hydride hydrogen compressors10.1016/j.ijhydene.2007.03.002 ↗
23. A study on 70 MPa metal hydride hydrogen compressor10.1016/j.jallcom.2010.04.206 ↗
24. Laves type intermetallic compounds as hydrogen storage materials: a review10.1016/j.jallcom.2022.165219 ↗
25. Studies on Ti-Zr-Cr-Mn-Fe-V based alloys for hydrogen compression under mild thermal conditions of water bath10.1016/j.jallcom.2021.162145 ↗
26. Investigation on Ti–Zr–Cr–Fe–V based alloys for metal hydride hydrogen compressor at moderate working temperatures10.1016/j.ijhydene.2021.03.247 ↗
27. Development of Ti0.85Zr0.17(Cr-Mn-V)1.3Fe0.7-based Laves phase alloys for thermal hydrogen compression at mild operating temperatures10.1007/s12598-022-01962-x ↗
28. Broon · 2011
29. Hydrogen storage in magnesium-based hydrides and hydride composites10.1016/j.scriptamat.2007.01.003 ↗
30. Léon · 200810.1007/978-3-540-69925-5 ↗
31. Structural and thermodynamic properties of metallic hydrides used for energy storage10.1016/j.jpcs.2003.08.037 ↗
32. Influence of impurities on hydrogen absorption in a metal hydride reactor10.1016/j.ijhydene.2012.04.078 ↗
33. Sites occupation and thermodynamic properties of the TiCr2-xMnx-H2 (0≤x≤1) system: statistical thermodynamics analysis10.1016/S0925-8388(02)01155-6 ↗
34. AB2 metal hydrides for high-pressure and narrow temperature interval applications10.1016/S0925-8388(98)00213-8 ↗
35. Development of metal hydride with high dissociation pressure10.1016/j.jallcom.2005.08.078 ↗
36. Hydrogen storage alloys for high-pressure suprapure hydrogen compressor10.1016/j.jallcom.2005.11.001 ↗
37. TiFe0.85Mn0.05 alloy produced at industrial level for a hydrogen storage plant10.1016/j.ijhydene.2022.06.295 ↗
38. Stoichiometry and alloying effects on the phase stability and mechanical properties of TiCr2-base laves phase alloys10.1557/PROC-364-1401 ↗
39. Improvement of hydrogen storage properties of the AB 2 Laves phase alloys for automotive application10.1016/j.ijhydene.2008.04.042 ↗
40. Laves phase hydrogen storage alloys for super-high-pressure metal hydride hydrogen compressors10.1007/s12598-011-0373-7 ↗
41. Combined hydrogen compressing and heat transforming through metal hydrides10.1016/S0360-3199(98)00095-0 ↗
42. Design of a hydrogen compressor for hydrogen fueling stations10.1016/j.ijhydene.2019.02.171 ↗
43. J. Barale, F. Nastro, D. Violi, P. Rizzi, C. Luetto, M. Baricco, A Metal Hydride Compressor for a Small Scale H2 Refuelling Station, Artic. Submitt. to Appl. Energy. (2022).10.1016/j.ijhydene.2023.05.155 ↗
44. Thermodynamic characterization and statistical thermodynamics of the TiCrMn–H 2 (D 2) system10.1016/S0925-8388(99)00798-7 ↗
45. Energy justice as a search light for gender-energy nexus: towards a conceptual framework10.1016/j.rser.2020.110668 ↗
46. High pressure thermal hydrogen compression employing Ti 1. 1 CrMn metal hydride material
47. Combined texture and structure analysis of deformed limestone from time-of-flight neutron diffraction spectra10.1063/1.364220 ↗
48. Realistic simulation in a single stage hydrogen compressor based on AB2 alloys10.1016/j.ijhydene.2016.01.125 ↗
49. S.V. Alapati, J.K. Johnson, D.S. Sholl, Predicting Reaction Equilibria for Destabilized Metal Hydride Decomposition Reactions for Reversible Hydrogen Storage, (2007) 1584–1591.10.1021/jp065117+ ↗
50. Enthalpy − entropy compensation e ff ect in hydrogen storage materials: striking example of alkali silanides MSiH 3 ( M = K, Rb, Cs)10.1021/jp411314w ↗
51. Bokx, Theory of enthalpy-entropy compensation10.1021/j100362a018 ↗