Zn-Y co-doped LiNi0.5Mn1.5O4 cathode materials with high electrochemical performance
Source abstract
Abstract
The LiNi 0.5−xZn xMn 1.48Y 0.02O 4 ( x = 0.01, 0.03, 0.05) series were prepared via a sol-gel method. The mechanism of the Zn 2+ and Y 3+ co-doping on the structural morphology and Mn 3+ ion dissolution, which led to the improved electrochemical performance of the LiNi 0.5Mn 1.5O 4 (LNMO) sample, were studied. Compared with the pristine LNMO, Zn-Y co-doping led to increased lattice parameters, morphological evolution, decreased Mn 3+ content, and better electrochemical properties. Among all the samples, LiNi 0.47Zn 0.03Mn 1.48Y 0.02O 4 (0.03ZnY) showed optimal electrochemical properties at room temperature and elevated temperature. After 200 cycles, the 0.03ZnY sample showed excellent cycling performance, i.e., 134.529 mAh g −1 at 1 C (with a capacity retention of 94.7%), which was higher than the pristine sample (104.913 mAh g −1, with a capacity retention of 92.7%). Furthermore, when tested at 1 C, at a high temperature (55 °C), the 2.03Zn-Y sample reached a discharge capacity of 94.004 mAh g −1 and maintained a 79.6% capacity retention after 120 cycles, which was higher than the pristine sample (52.430 mAh g −1, 43.6% capacity retention).
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. LiNi0. 5Mn1. 5O4 hollow structures as high‐performance cathodes for lithium‐ion batteries10.1002/anie.201106998 ↗
2. Enhancement of the high‐rate capability of solid‐state lithium batteries by nanoscale interfacial modification10.1002/adma.200502604 ↗
3. Advances and challenges for flexible energy storage and conversion devices and systems10.1039/c4ee00318g ↗
4. Combining fast Li-ion battery cycling with large volumetric energy density: grain boundary induced high electronic and ionic conductivity in Li4Ti5O12 spheres of densely packed nanocrystallites10.1021/acs.chemmater.5b02027 ↗
5. Capacity fade mechanism of Li4Ti5O12 nanosheet anode10.1002/aenm.201601825 ↗
6. Spinel anodes for Li-ion battery10.1149/1.2059324 ↗
7. Simplified co-precipitation synthesis of spinel LiNi0. 5Mn1. 5O4 with improved physical and electrochemical performance10.1016/j.jallcom.2014.02.034 ↗
8. Impact of lithium bis (oxalate) borate electrolyte additive on the performance of high-voltage spinel graphite Li-ion batteries10.1021/jp408717x ↗
9. New insight into the mechanism of LiPO2F2 on the interface of high-voltage cathode LiNi0. 5Mn1. 5O4 with truncated octahedral structure10.1016/j.apsusc.2019.06.146 ↗
10. Effect of Zr doping on LiNi0. 5Mn1. 5O4 with ordered or disordered structures10.1016/j.jallcom.2018.03.177 ↗
11. Chemical valence electron-engineered LiNi0. 4Mn1. 5MtO4 (Mt= Co and Fe) cathode materials with high-performance electrochemical properties10.1016/j.apsusc.2019.144514 ↗
12. Synergism of Cu and Al co-doping on improvements of structural integrity and electrochemical performance for LiNi0.5Mn1. 5O410.1016/j.jallcom.2019.153140 ↗
13. Tellurium surface doping to enhance the structural stability and electrochemical performance of layered Ni-rich cathodes10.1021/acsami.9b13906 ↗
14. Effectively stabilizing 5 V spinel LiNi0. 5Mn1. 5O4 cathode in organic electrolyte by polyvinylidene fluoride coating10.1016/j.apsusc.2018.05.151 ↗
15. Surface-segregated, highvoltage spinel lithium-ion battery cathode material LiNi0.5Mn1.5O4 cathodes by aluminium doping with improved high-rate cyclability10.1016/j.jallcom.2017.01.248 ↗
16. Facile synthesis of high performance LiNi0.5Mn1.4Mg0.1O4 and LiNi0.5Mn1.4Al0.1O4 by a low temperature solution combustion synthesis method10.1016/S1452-3981(23)06749-4 ↗
17. Preparation and characterization of spinel LiNi0.5- xMgxMn1.5O4 cathode materials via spray pyrolysis method10.1016/j.jpowsour.2013.04.083 ↗
18. Mg gradient-doped LiNi0.5Mn1.5O4 as the cathode material for Li-ion batteries10.1016/j.electacta.2013.12.065 ↗
19. Cu doped LiNi0.5Mn1.5−xCuxO4 (x=0, 0.03, 0.05, 0.10, 0.15) with significant improved electrochemical performance prepared by a modified low temperature solution combustion synthesis method10.1016/j.ceramint.2017.11.112 ↗
20. Effect of Zr doping on LiNi0.5Mn1.5O4 with ordered or disordered structures10.1016/j.jallcom.2018.03.177 ↗
21. Evidence of loss of active lithium in titanium-doped LiNi0.5Mn1.5O4g-1raphite cells10.1016/j.jpowsour.2014.10.199 ↗
22. Enhancement of electrochemical performance by simultaneous substitution of Ni and Mn with Fe in Ni-Mn spinel cathodes for Li-ion batteries10.1016/j.jpowsour.2016.07.047 ↗
23. Enhanced electrochemical performances of LiNi0.5Mn1.5O4 spinel in half-cell and fullcell via yttrium doping10.1016/j.jallcom.2017.06.060 ↗
24. Ruthenium doped LiMn1. 5Ni0. 5O4 microspheres with enhanced electrochemical performance as lithium-ion battery cathode10.1007/s10854-021-06706-8 ↗
25. Improvement of electrochemical properties of LiNi0.5Mn1.5O4 spinel material by fluorine substitution10.1016/j.jpowsour.2005.07.056 ↗
26. Fluorine gradient-doped LiNi0.5Mn1.5O4 spinel with improved high voltage stability for Li-ion batteries10.1016/j.electacta.2017.04.043 ↗
27. Effects of Cl doping on the structural and electrochemical properties of high voltage LiNi0.5Mn1.5O4 cathode materials for Li-ion batteries10.1016/j.jallcom.2013.12.248 ↗
28. Fluorine gradient-doped LiNi0. 5Mn1. 5O4 spinel with improved high voltage stability for Li-ion batteries10.1016/j.electacta.2017.04.043 ↗
29. Effect of Mg2+/F− co-doping on electrochemical performance of LiNi0. 5Mn1. 5O4 for 5 V lithium-ion batteries10.1016/j.electacta.2019.134692 ↗
30. Synergistic effect of Mg and Y co-dopants on enhancement of electrochemical properties of LiNi0. 5Mn1. 5O4 spinel10.1016/j.electacta.2021.139433 ↗
31. The correlation between particle hardness and cycle performance of layered cathode materials for lithium-ion batteries10.1016/j.jpowsour.2020.229359 ↗
32. Comparative Study of LiNi0.5Mn1.5O4-δ and LiNi0.5Mn1.5O4 Cathodes Having Two Crystallographic Structures: Fd3m and P433210.1021/cm035050s ↗
33. High-power nanostructured LiMn2−xNixO4 high-voltage lithium-ion battery electrode materials: electrochemical impact of electronic conductivity and morphology. Chem.Mater.18, 2006: 3585–3592.10.1021/cm060729s ↗
34. Synthesis and characterization of nanostructured 4.7 V Li x Mn1. 5Ni0. 5O4 spinels for high-power lithium-ion batteries10.1149/1.2198110 ↗
35. Influence of Ti doping on microstructure and electrochemical performance of LiNi0. 5Mn1. 5O4 cathode material for lithium-ion batteries
36. Effects of Si doping on structural and electrochemical performance of LiNi0.5Mn1.5O4 cathode materials for lithium-ion batteries10.1016/j.powtec.2020.02.033 ↗
37. Lithium manganese spinel materials for high-rate electrochemical applications10.1016/S2095-4956(14)60184-4 ↗
38. Structurally stabilized LiNi0.5Mn1.5O4 with enhanced electrochemical properties through nitric acid treatment10.1016/j.jpowsour.2012.12.051 ↗
39. Truncated octahedral LiNi0.5Mn1.5O4 cathode material for ultralong-life lithium-ion battery: positive (100) surfaces in high-voltage spinel system10.1016/j.jpowsour.2015.09.066 ↗
40. Structurally stabilized LiNi0.5Mn1.5O4 with enhanced electrochemical properties through nitric acid treatment10.1016/j.jpowsour.2012.12.051 ↗
41. Truncated octahedral LiNi0.5Mn1.5O4 cathode material for ultralong-life lithium-ion battery: positive (100) surfaces in high-voltage spinel system10.1016/j.jpowsour.2015.09.066 ↗
42. Lithium-ion batteries: thermal reactions of electrolyte with the surface of metal oxide cathode particles10.1149/1.2210588 ↗
43. Electrochemical investigations of the LiNi0. 45M0. 10Mn1. 45O4 (M= Fe, Co, Cr) 5 V cathode materials for lithium ion batteries10.1016/j.jpowsour.2011.12.037 ↗
44. Er-doped LiNi0.5Mn1.5O4 cathode material with enhanced cycling stability for lithium-ion batteries10.3390/ma10080859 ↗
45. Promoting electrochemical performances of LiNi0.5Mn1.5O4 cathode via YF3 surface coating10.1016/j.ssi.2020.115464 ↗
46. Improved cycling and rate performance of Sm-doped LiNi0.5Mn1.5O4 cathode materials for 5V lithium-ion batteries10.1016/j.apsusc.2013.11.094 ↗
47. Enhanced rate performance of molybdenum-doped spinel LiNi0.5Mn1.5O4 cathode materials for lithium ion battery10.1016/j.jpowsour.2013.09.031 ↗
48. Part I: electronic and ionic transport properties of the ordered and disordered LiNi0.5Mn1.5O4 spinel cathode10.1016/j.jpowsour.2017.02.071 ↗
49. Insight into the effect of graphene coating on cycling stability of LiNi0. 5Mn1. 5O4: Integration of structure-stability and surface-stability
50. Synthesis and characterization of LiNi0. 49Mn1. 49Y0. 02O4@ Ag by electroless plating technique10.1016/j.apsusc.2014.12.102 ↗
51. Enhanced electrochemical performances of LiNi0. 5Mn1. 5O4 spinel in half-cell and full-cell via yttrium doping10.1016/j.jallcom.2017.06.060 ↗
52. Correlation between structural, electrical and electrochemical performance of Zn doped high voltage spinel LiNi0. 5−xZnxMn1. 5O4 porous microspheres as a cathode material for Li-Ion batteries10.1016/j.ceramint.2021.09.070 ↗
53. LiNi0. 5Mn1. 45Zn0. 05O4 with excellent electrochemical performance for lithium ion batteries10.20964/2017.09.03 ↗
54. The LiZnxNi0. 5−xMn1. 5O4 spinel with improved high voltage stability for Li-ion batteries10.1016/j.electacta.2013.11.023 ↗