Kink band formation mechanism in α/β Ti-9Cr two-phase alloy
Source abstract
Abstract
A combination of experimental and numerical studies was carried out to understand the microstructure and formation mechanism of kink bands in α/ β two-phase titanium alloys. A deformation kink band was introduced in a Ti-9Cr alloy after uniaxial compression test. The strength changes of the α and β phases inside and outside the kink band were evaluated by nanoindentation tests. A potential hardening effect was revealed in the α phase inside the kink band, while a possible softening effect was located in the β phase at the kink boundaries. Microstructural examination of the kink band was conducted by electron backscatter diffraction measurement. The crystal rotation axis was found to be perpendicular to both the (0001) basal plane of the α phase and one of the (110) planes of the β phase. The crystallographic features were characterized by transmission electron microscopy observation, revealing a prismatic 〈 a 〉 slip that occurred during the compression to accommodate the rotations around the c-axis. Nanoindentation tests were performed on an undeformed specimen to calibrate the crystal plasticity model. A crystal plasticity finite element model was developed and {110} β -rotation-type kink bands were reproduced in the simulation and confirmed the prismatic slip activity.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced Welding Techniques Analysis · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Structure and nature of kink bands in zinc10.1007/BF03398902 ↗
2. On the theory of kinking10.1088/0370-1301/65/10/311 ↗
3. Plastic deformation behavior of mg12yzn with 18r long-period stacking ordered structure10.1016/j.intermet.2009.07.014 ↗
4. Effect of multimodal microstructure evolution on mechanical properties of mg–zn–y extruded alloy10.1016/j.actamat.2011.02.038 ↗
5. Quantitative estimation of kink-band strengthening in an mg–zn–y single crystal with lpso nanoplates10.1080/21663831.2021.1974593 ↗
6. Mechanical properties and failure mechanisms of mg-zn-y alloys with different extrusion ratio and lpso volume fraction
7. Deformation behavior of long-period stacking ordered structured single crystals in mg85zn6y9 alloy10.2320/matertrans.MH201415 ↗
8. Plastic deformation behavior of mg89zn4y7 extruded alloy composed of long-period stacking ordered phase10.1016/j.intermet.2010.02.011 ↗
9. Inducement of kink-band formation in directionally solidified mg/mg17al12 eutectic alloy-inspired by the deformation behavior of the long-period stacking ordered (lpso) phase10.1016/j.msea.2020.140087 ↗
10. Kink-band formation in directionally solidified mg/mg2yb and mg/mg2ca eutectic alloys with mg/laves-phase lamellar microstructure10.1016/j.jma.2021.02.006 ↗
11. Formation of < 0001 > -rotation-type kink boundary in mg–zn–y alloy with long-period stacking ordered structure10.1016/j.msea.2021.141466 ↗
12. Kink band and shear band localization in anisotropic perfectly plastic solids10.1016/j.jmps.2020.104183 ↗
13. Mechanical properties and deformation mechanisms of a commercially pure titanium10.1016/S1359-6454(99)00203-7 ↗
14. The deformation mechanisms in the β-metastable β-cez titanium alloy10.1016/S1359-6462(96)00341-7 ↗
15. Deformation mechanisms in the near-β titanium alloy ti-5553110.1007/s11661-013-2073-4 ↗
16. Introduction of mille-feuille-like α/β layered structure into ti–mo alloy10.2320/matertrans.MT-MM2019002 ↗
17. Effects of cold deformation on the morphology of α precipitates in β titanium alloys10.2355/isijinternational.32.222 ↗
18. Crystallography and deformation behavior of α phase precipitate at twin/matrix interface in a cold rolled metastable ti-12mo alloy10.1016/j.jallcom.2021.162234 ↗
19. Potential kink band formation on α/β two-phase ti-10cr alloy under compressive condition10.1016/j.msea.2022.143538 ↗
20. Crystallography of α phase precipitated on dislocations and deformation twin boundaries in a β titanium alloy10.2320/matertrans1989.33.585 ↗
21. Enhancement of uniform elongation in high strength ti–mo based alloys by combination of deformation modes10.1016/j.msea.2011.02.071 ↗
22. Crystal plasticity analysis of development of intragranular misorientations due to kinking in hcp single crystals subjected to uniaxial compressive loading10.2320/matertrans.MH201403 ↗
23. Lamellar kinking in primary hot working of titanium alloy: cross-scale behavior and mechanism10.1016/j.jmatprotec.2022.117659 ↗
24. Texture analysis with mtex–free and open source software toolbox
25. M. Smith, ABAQUS/Standard User’s Manual, Version 6.9, Dassault Systèmes Simulia Corp, United States, 2009.
26. Finite-strain elastic-plastic theory with application to plane-wave analysis10.1063/1.1708953 ↗
27. An analysis of nonuniform and localized deformation in ductile single crystals10.1016/0001-6160(82)90005-0 ↗
28. Material rate dependence and localized deformation in crystalline solids10.1016/0001-6160(83)90014-7 ↗
29. Overview no. 42 texture development and strain hardening in rate dependent polycrystals10.1016/0001-6160(85)90188-9 ↗
30. Bounds and self-consistent estimates for creep of polycrystalline materials10.1098/rspa.1976.0027 ↗
31. Finite element simulation of indentation experiments10.1016/0020-7683(88)90039-X ↗
32. G. Simmons, H. Wang, et al., Single Crystal Elastic Constants and Calculated Aggregate Properties (1971).
33. Determination of elastic constants of generally anisotropic inclined lamellar structure using line-focus acoustic microscopy10.1121/1.3245032 ↗
34. A practical guide for analysis of nanoindentation data10.1016/j.jmbbm.2008.10.002 ↗
35. Perspectives on titanium science and technology10.1016/j.actamat.2012.10.043 ↗
36. The effect of crystal orientation on the indentation response of commercially pure titanium: experiments and simulations
37. Crystallographic classification of kink bands in an extruded mg–zn–y alloy using intragranular misorientation axis analysis10.1016/j.actamat.2012.12.026 ↗
38. Analysis of the different slip systems activated by tension in a α/β titanium alloy in relation with local crystallographic orientation10.1016/j.actamat.2004.09.040 ↗
39. Rolling reduction-dependent deformation mechanisms and tensile properties in a β titanium alloy10.1016/j.jmst.2021.05.071 ↗
40. Strengthening mechanisms acting in extruded mg-based long-period stacking ordered (lpso)-phase alloys10.1016/j.actamat.2018.10.016 ↗
41. Strengthening of mg-based long-period stacking ordered (lpso) phase with deformation kink bands10.1016/j.msea.2019.138163 ↗
42. Microstructural factors governing the significant strengthening of al/al2cu mille-feuille structured alloys accompanied by kink-band formation10.1016/j.ijplas.2022.103419 ↗