journal article·2023-03

Effect of micro-texture on tensile properties and room-temperature stretch formability of Mg-Al-Zn alloy sheet

T. Nakata, T. Matsuno, R. Oki, S. Kamado

Publisher page

Abstract

The effect of “micro-texture” on tensile properties and room-temperature stretch formability of Mg-Al-Zn alloy sheet was investigated. The micro-texture was successfully introduced in the Mg-Al-Zn alloy sheet by solution-treatment, hot-rolling, and post-annealing. The fraction of unique texture component ((0001) poles being tilted by 50° or more from the sheet normal direction) increased slightly, which improved a limiting dome height from 5.1 mm to 7.0 mm without loss of the strength owing to high activity of tensile twinning and little change in the Schmid factor for basal slips. The finding emphasizes the importance of “micro-texture” designing for the development of magnesium alloy sheets with high strength-formability synergy.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Magnesium alloy sheets with bake-hardenability10.1007/s11837-021-04613-1 ↗
2. Review: magnesium sheet alloy development for room temperature forming10.1007/s11837-021-04616-y ↗
3. Effects of Si on the aging behaviour and formability of aluminium alloys based on AA601610.1016/S0921-5093(01)00969-8 ↗
4. Effects of aging parameters on formability of 6061-O alloy10.1016/j.matdes.2010.05.050 ↗
5. Factors affecting the strength and formability of alloys based on Al–3 wt% Mg10.1016/S0921-5093(00)02018-9 ↗
6. Enhancement of stretch formability at room temperature by addition of Ca in Mg-Zn alloy10.2320/matertrans.M2009385 ↗
7. Enhanced ductility and strength of Mg-1Zn-1Sn-0.3Y-0.2Ca alloy achieved by novel micro-texture design10.1016/j.scriptamat.2021.114119 ↗
8. Improving room-temperature stretch formability of Mg-4.9Al-0.16Mn (mass%) alloy sheet via optimizing rolling temperature10.1007/s11837-021-04610-4 ↗
9. New Mg–Al based alloy sheet with good room-temperature stretch formability and tensile properties10.1016/j.scriptamat.2020.01.015 ↗
10. Distribution characteristics of in-grain misorientation axes in cold-rolled commercially pure titanium and their correlation with active slip modes10.1007/s11661-010-0410-4 ↗
11. Twinning-mediated formability in Mg alloys10.1038/srep22364 ↗
12. Enhanced stretch formability of rolled Mg–3Al–1Zn alloy at room temperature by initial {10–12} twins10.1016/j.msea.2013.04.084 ↗
13. Calculation of Schmid factor in Mg alloys: Influence of stress state10.1016/j.scriptamat.2019.06.014 ↗
14. T. Nakata, C. Xu, K. Sugiya, Y. Yoshida, K. Yoshida, L. Geng, S. Kamado, Microtexture-induced anomalous anisotropic tensile behavior in Mg–Al–Zn alloy sheet, 840, 2022: 143002. https://doi.org/10.1016/j.msea.2022.143002.10.1016/j.msea.2022.143002 ↗
15. Enhanced stretch formability of Mg–Al–Zn alloy sheets rolled at high temperature (723 K)10.1016/j.scriptamat.2008.11.029 ↗
16. Mg sheet: the effect of process, parameters and alloy composition on texture and mechanical properties10.1007/s11837-009-0119-2 ↗
17. Nucleation and propagation of {10 12} twins in AZ31 magnesium alloy10.1016/j.actamat.2015.08.024 ↗
18. Relationship between textures and deformation modes in Mg–3Al–1Zn alloy during uniaxial tension10.1016/j.matchar.2015.08.014 ↗
19. Role of slip and {10-12} twin on the crystal plasticity in Mg-RE alloy during deformation process at room temperature10.1016/j.jmst.2021.01.006 ↗
20. A criterion for local necking10.1016/S0924-0136(00)00410-6 ↗
21. Microstructural control of aluminum sheet used in automotive applications10.1016/1044-5803(95)00065-8 ↗
22. Geometrical criterion for the activation of prismatic slip in AZ61 Mg alloy sheets deformed at room temperature10.1016/j.actamat.2005.01.008 ↗
23. A simultaneous improvement of both strength and ductility by Sn addition in as-extruded Mg-6Al-4Zn alloy10.1016/j.jmst.2019.04.048 ↗
24. Understanding room-temperature deformation behavior in a dilute Mg–1.52Zn–0.09Ca (mass%) alloy sheet with weak basal texture10.1016/j.msea.2022.143638 ↗