journal article·2023-03

NiOx-coated/Zn-doped CuO photoelectrodes with efficient charge transfer, protection from photocorrosion, and improved photocurrent density and photostability

Hyunjin Jeong, Seongchan Bae, Hyukhyun Ryu

Publisher page

Abstract

In this study, Zn-doped CuO photoelectrodes were fabricated to investigate whether Zn doping would improve the photocurrent density by enhancing crystallinity, reducing charge transfer resistance and producing more efficient charge transfer in CuO photoelectrodes. In particular, the photocurrent density of a 5 at% Zn-doped CuO photoelectrode was − 2.32 mA/cm 2, which was significantly higher than that of a bare CuO photoelectrode (−1.54 mA/cm 2). However, the photostability of the doped CuO photoelectrodes was still low at 55.2 %, so protective layers with various NiO x concentrations were deposited on the photoelectrodes, and their photostability was analyzed. By comparing the XPS Cu 2p spectra of bare CuO, 5 at% Zn-doped CuO and 0.045 at% NiO x-coated/5 at% Zn-doped CuO photoelectrodes measured before and after photostability measurements, we investigated the reduction of CuO, which causes photocorrosion. The results of this study showed that Zn doping and NiO x deposition greatly improved the structural, electrical and photoelectrical properties of the CuO photoelectrodes. The photostability of the 0.045 at% NiO x-coated/5 at% Zn-doped CuO photoelectrode was very high, at 92.9 %, and the photocurrent density also improved to − 2.47 mA/cm 2.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Ga2O3 and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. A review on solar-hydrogen/fuel cell hybrid energy systems for stationary applications10.1016/j.pecs.2008.07.004 ↗
2. Decoupled photoelectrochemical water splitting system for centralized hydrogen production10.1016/j.joule.2019.12.006 ↗
3. Interfacial charge transport in 1D TiO2 based photoelectrodes for photoelectrochemical water splitting10.1002/smll.201903378 ↗
4. Systematic study of an Fe2O3 stacked homojunction photoelectrochemical photoelectrode10.1016/j.ceramint.2020.11.127 ↗
5. Nanoporous Fe-doped BiVO4 modified with MIL-53 (Fe) for enhanced photoelectrochemical stability and water splitting perfromances10.1007/s10562-018-2629-4 ↗
6. Study of the morphological, structural, optical and photoelectrochemical properties of zinc oxide nanorods grown using a microwave chemical bath deposition method10.3365/KJMM.2017.55.4.255 ↗
7. Effects of ammonia in the synthesis of copper (II) oxide nanostructures grown via microwave chemical bath deposition10.1016/j.surfcoat.2017.12.002 ↗
8. Effects of lithium (Li) on lithium-cuprous-oxide (Li-Cu2O) composite films grown by using electrochemical deposition for a PEC photoelectrode10.3938/jkps.68.268 ↗
9. Flake-like NiO/WO3 pn heterojunction photocathode for photoelectrochemical water splitting10.1016/j.apsusc.2018.01.292 ↗
10. Effects of Fe doping on the photoelectrochemical properties of CuO photoelectrodes10.1016/j.compositesb.2018.11.041 ↗
11. CuO/CuBi2O4 heterojunction photocathode: high stability and current densities for solar water splitting10.1016/j.jcat.2020.04.001 ↗
12. Improved photostability of a CuO photoelectrode with Ni-doped seed layer10.1016/j.ceramint.2017.09.129 ↗
13. Improvement of an Al2O3/CuO heterostructure photoelectrode by controlling the Al2O3 precursor concentration10.1016/j.jiec.2019.09.043 ↗
14. Improving the photostability of cupric oxide nanorods10.1016/j.tsf.2020.137849 ↗
15. Structural, optical and electrical properties of zinc incorporated copper oxide nanoparticles: doping effect of Zn10.1007/s10853-017-1496-5 ↗
16. Extending lifetime of photoinduced charge carriers in CuO photocathode by Zn doping for photoelectrochemical water reduction10.1016/j.jssc.2020.121603 ↗
17. Facile synthesis of Zn doped CuO hierarchical nanostructures: structural, optical and antibacterial properties10.1063/1.4937907 ↗
18. Ti, Zn co-doped hematite photoanode for solar driven photoelectrochemical water oxidation10.1016/j.jechem.2018.10.012 ↗
19. Structural, optical and electronic properties of CuO and Zn doped CuO: DFT based First-principles calculations10.1016/j.chemphys.2019.110536 ↗
20. Highly active photocatalyst of Cu2O/TiO2 octahedron for hydrogen generation10.1021/acsomega.8b03404 ↗
21. Synthesis and characterization of cluster of grapes like pure and Zinc-doped CuO nanoparticles by sol–gel method10.1016/j.saa.2014.10.087 ↗
22. FeOOH as hole transfer layer to retard the photocorrosion of Cu2O for enhanced photoelctrochemical performance10.1016/j.apcatb.2019.118213 ↗
23. Electron‐selective TiO2/CVD‐graphene layers for photocorrosion inhibition in Cu2O photocathodes10.1002/admi.201700271 ↗
24. One-step straightforward synthesis of Tb-doped NiO nanocomposites using flash combustion method: structural, optical, luminescent, and electrical switching properties10.1016/j.ceramint.2020.01.074 ↗
25. Cu2O/ZnO p–n junction decorated with NiOx as a protective layer and cocatalyst for enhanced photoelectrochemical water splitting10.1021/acsaem.0c01198 ↗
26. Determination of the crystallinity of TiO2 photocatalysts10.1016/j.jphotochem.2018.08.042 ↗
27. Formation and suppression of defects during heat treatment of BiVO4 photoanodes for solar water splitting10.1039/C8TA06269B ↗
28. Photoelectrochemical properties of Fe2O3 nanorods grown with an Na2SO4 additive10.1016/j.jiec.2018.01.036 ↗
29. Nickel-doped ZnO structures for efficient water splitting under visible light10.1088/2053-1591/ab0763 ↗
30. Activation of a highly oriented columnar structure of ZnFe2O4 for photoelectrochemical water splitting: orchestrated effects of two-step quenching and Sn4+ diffusion10.1016/j.solmat.2018.08.007 ↗
31. NiFe alloy protected silicon photoanode for efficient water splitting10.1002/aenm.201601805 ↗
32. Optimization of photoelectrochemical water splitting performance on hierarchical TiO2 nanotube arrays10.1039/c2ee03461a ↗
33. Gradient doping of phosphorus in Fe2O3 nanoarray photoanodes for enhanced charge separation10.1039/C6SC03707K ↗
34. Photovoltaic mixed-cation lead mixed-halide perovskites: links between crystallinity, photo-stability and electronic properties10.1039/C6EE03014A ↗
35. Ultra-thin Al2O3 coatings on BiVO4 photoanodes: impact on performance and charge carrier dynamics10.1016/j.cattod.2017.11.014 ↗
36. Cu2ZnSnS4–Ag2S nanoscale p–n Heterostructures as sensitizers for photoelectrochemical water splitting10.1021/acs.langmuir.5b02490 ↗
37. Highly efficient and stable 3D Ni(OH)2/CdS/ZnIn2S4/TiO2 heterojunction under solar light: effect of an improved TiO2/FTO interface and cocatalyst10.1016/j.solmat.2016.09.038 ↗
38. Cu2O/CuO heterojunction catalysts through atmospheric pressure plasma induced defect passivation10.1016/j.apsusc.2020.148571 ↗
39. Highly stable hierarchical p-CuO/ZnO nanorod/nanobranch photoelectrode for efficient solar energy conversion10.1016/j.ijhydene.2015.10.146 ↗
40. Nanoengineered advanced materials for enabling hydrogen economy: functionalized graphene–incorporated cupric oxide catalyst for efficient solar hydrogen production10.1002/gch2.201900087 ↗
41. Enhancing photoelectrochemical activity with three-dimensional p-CuO/n-ZnO junction photocathodes10.1007/s40843-016-5054-6 ↗
42. One-pot microwave synthesis of hierarchical C-doped CuO dandelions/g-C3N4 nanocomposite with enhanced photostability for photoelectrochemical water splitting
43. Enhancement in the charge transport and photocorrosion stability of CuO photocathode: the synergistic effect of spatially separated dual-cocatalysts and pn heterojunction10.1016/j.cej.2020.124907 ↗
44. Stabilized solar hydrogen production with CuO/CdS heterojunction thin film photocathodes10.1021/acs.chemmater.6b05248 ↗
45. Chemical bath deposition of Cu2O quantum dots onto ZnO nanorod arrays for application in photovoltaic devices10.1039/C4RA13776K ↗