journal article·2023-03Open access

Deposition rate controls nucleation and growth during amorphous/nanocrystalline competition in sputtered Zr-Cr thin films

Q. Liebgott, A. Borroto, Z. Fernández-Gutiérrez, S. Bruyère, F. Mücklich, D. Horwat

Abstract

Dual-phase Zr-based thin films synthesized by magnetron co-sputtering and showing competitive growth between amorphous and crystalline phases have been reported recently. In such films, the amorphous phase grows as columns, while the crystalline phase grows as separated cone-shaped crystalline regions made of smaller crystallites. In this paper, we investigate this phenomenon and propose a model for the development of the crystalline regions during thin film growth. We evidence using X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM), that this competitive selfseparation also exists in co-sputtered Zr-Cr thin films with Cr contents of ~84-86 at.%, corresponding to the transition between the amorphous and crystalline compositions, and in the Zr-V system. Then, to assess the sturdiness of this phenomenon, its existence and geometrical characteristics are evaluated when varying the film composition and the deposition rate. The variation of geometrical features, such as the crystalline cone angle, the size and density of crystallites, is discussed. Is it shown that a variation in the deposition rate changes the nucleation and growth kinetics of the crystallites. The surface coverage by the crystalline phase at a given thickness is also calculated for each deposition rate. Moreover, comparison is made between Zr-Cr, Zr-V, Zr-Mo and Zr-W dual-phase thin films to compare their nucleation and growth kinetics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Copper Interconnects and Reliability · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Comparison of two-step surface treatment on surface roughness and corrosion resistance of TC4 alloy parts prepared by SLM and SEBM10.1016/j.jallcom.2022.165929 ↗
2. Materials and structure engineering by magnetron sputtering for advanced lithium batteries10.1016/j.ensm.2021.04.012 ↗
3. Combined surface hardening and laser patterning approach for functionalising stainless steel surfaces10.1016/j.apsusc.2018.01.012 ↗
4. Increasing antibacterial efficiency of Cu surfaces by targeted surface functionalization via ultrashort pulsed direct laser interference patterning
5. Corrosion and antibacterial performance of novel selective-laser-melted (SLMed) Ti-xCu biomedical alloys10.1016/j.jallcom.2020.158415 ↗
6. Antibacterial Ti-35Nb-7Zr-xCu alloy with excellent mechanical properties generated with a spark plasma sintering method for biological applications10.1016/j.jallcom.2021.160473 ↗
7. Surface passivation using 2D perovskites toward efficient and stable perovskite solar cells
8. Construction of NiCo/graphene nanocomposite coating with bulges-like morphology for enhanced mechanical properties and corrosion resistance performance10.1016/j.jallcom.2021.159138 ↗
9. Microstructural, mechanical and tribological properties of ultrafine-grained Cu–Cr–Zr alloy processed by high pressure torsion10.1016/j.jallcom.2019.152675 ↗
10. Microstructures, wear resistance and corrosion resistance of CoCrFeNi high entropy alloys coating on AZ91 Mg alloy prepared by cold spray10.1016/j.jallcom.2022.166698 ↗
11. The fabrication and property evaluation of Zr-Ti-B-Si thin film metallic glass materials10.1016/j.surfcoat.2014.03.026 ↗
12. Thin-film metallic glasses for substrate fatigue-property improvements10.1016/j.tsf.2013.12.024 ↗
13. Micro-scratch study of a magnetron-sputtered Zr-based metallic-glass film10.1016/j.surfcoat.2009.05.017 ↗
14. Glass-forming ability of alloys10.1016/0022-3093(93)90003-G ↗
15. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
16. Composition-driven transition from amorphous to crystalline films enables bottom-up design of functional surfaces10.1016/j.apsusc.2020.148133 ↗
17. Self-formation of dual glassy-crystalline structure in magnetron sputtered W–Zr films10.1016/j.vacuum.2021.110099 ↗
18. Growth kinetics and origin of residual stress of two-phase crystalline-amorphous nanostructured films10.1063/5.0044029 ↗
19. Controlling surface morphology by nanocrystalline/amorphous competitive self-phase separation in thin films: Thickness-modulated reflectance and interference phenomena10.1016/j.actamat.2019.09.036 ↗
20. Electrical and structural properties of direct current magnetron sputtered amorphous TiAl thin films10.1016/j.tsf.2018.10.033 ↗
21. Surface morphology of heterogeneous nanocrystalline rutile/amorphous anatase TiO2 films grown by reactive pulsed magnetron sputtering10.1002/ppap.200900182 ↗
22. Columnar growth of ALN by r.f. magnetron sputtering: roleof the {1 0 1̄ 3} planes10.1016/j.jcrysgro.2007.06.013 ↗
23. The corrosion behavior of sputter-deposited amorphous Chromium-Zirconium alloys in 6M HCl solution10.1016/0010-938X(93)90019-D ↗
24. Laves phases in the V-Zr system below room temperature: Stability analysis using ab initio results and phase diagram
25. Thermodynamic modeling of Cr-Nb and Zr-Cr with extension to the ternary Zr-Nb-Cr system
26. Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings10.1116/1.1312732 ↗
27. Microstructure and mechanical properties of W-Zr reactive materials10.1016/j.msea.2016.02.009 ↗
28. Thermodynamic assessment of the Mo-Zr binary phase diagram