Graphene nanoplatelets reinforced NiCu composite manufactured by laser melting deposition
Source abstract
Abstract
To improve the wear resistance of the NiCu alloy, graphene nanoplatelets (GNPs) as reinforcement reinforced the NiCu/graphene nanoplatelets (GNPs) composite by mechanical alloying (MA) and laser melting deposition (LMD). The GNPs are transformed into in-situ graphite/Ni-Cu (G/Ni-Cu) particles, which are evenly dispersed in the Ni-Cu matrix in NiCu/GNPs composite coating . The principle of the original GNPs grows into G/Ni-Cu particle is analyzed. Moreover, compared with NiCu coating, which consisted of a single phase (Ni-Cu), microhardness increased by 130% and wear mass loss of the NiCu/GNPs composite coating is reduced by 936%.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Graphene research and applications · Additive Manufacturing and 3D Printing Technologies · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Comparisons of 304 austenitic stainless steel manufactured by laser metal deposition and selective laser melting10.1016/j.jmapro.2020.06.042 ↗
2. Laser powder bed fusion of metal coated copper powders10.3390/ma13163493 ↗
3. Development and characterisation of direct laser sintering multicomponent Cu based metal powder10.1179/174329006X95662 ↗
4. TC17 titanium alloy laser melting deposition repair process and properties10.1016/j.optlastec.2016.02.013 ↗
5. Prototype orthopedic bone plates 3D printed by laser melting deposition10.3390/ma12060906 ↗
6. Mechanical properties of AlSi10Mg alloy fabricated by laser melting deposition and improvements via heat treatment10.1016/j.ijleo.2018.10.112 ↗
7. The effect of hydrogen on the grain refinement and mechanisms for Ti6Al4V alloys during laser melting deposition10.1016/j.jallcom.2021.160122 ↗
8. Microstructure and corrosion behaviors of FeCrNiBSiMox stainless steel fabricated by laser melting deposition10.1002/maco.201911353 ↗
9. Metal matrix composites synthesized by laser-melting deposition: a review10.3390/ma13112593 ↗
10. Experimental study of localized electrochemical deposition of Ni-Cu alloy using a moving anode10.1016/j.procir.2017.12.053 ↗
11. Graphene coating on a nickel-copper alloy (Monel 400) for microbial corrosion resistance: electrochemical and surface characterizations10.1016/j.corsci.2021.109299 ↗
12. Effect of rare earth and ceramic on the microstructure and properties of laser cladding monel alloy
13. Effect of WC-12Co content on wear and electrochemical corrosion properties of Ni-Cu/WC-12Co composite coatings deposited by laser cladding10.1016/j.surfcoat.2020.125807 ↗
14. Comparison of cutting mechanism when machining micro and nano-particles reinforced SiC/Al metal matrix composites10.1016/j.compstruct.2018.07.076 ↗
15. Metal matrix composites reinforced by nano-particles—a review10.3390/met4010065 ↗
16. A review of processing techniques for graphene-reinforced metal matrix composites10.1080/10426914.2019.1615080 ↗
17. Effect of in-situ synthesis of multilayer graphene on the microstructure and tribological performance of laser cladded Ni-based coatings10.1016/j.apsusc.2019.143581 ↗
18. Mechanical and tribological properties of self-lubricating metal matrix nanocomposites reinforced by carbon nanotubes (CNTs) and graphene – a review10.1016/j.compositesb.2015.03.014 ↗
19. Graphene reinforced metal and ceramic matrix composites: a review10.1080/09506608.2016.1219481 ↗
20. Tribological performance of functionally gradient structure of graphene nanoplatelets reinforced Ni3Al metal matrix composites prepared by laser melting deposition10.1016/j.wear.2019.04.009 ↗
21. Wear resistance of graphene nano-platelets (GNPs) reinforced AlSi10Mg matrix composite prepared by SLM10.1016/j.apsusc.2019.144156 ↗
22. Selective laser melting of low-content graphene nanoplatelets reinforced 316L austenitic stainless steel matrix: Strength enhancement without affecting ductility
23. Tribological behavior of graphene-reinforced 316L stainless-steel composite prepared via selective laser melting10.1016/j.triboint.2020.106525 ↗
24. Graphene reinforced nickel-based superalloy composites fabricated by additive manufacturing10.1016/j.msea.2019.138484 ↗
25. Raman spectroscopy in graphene10.1016/j.physrep.2009.02.003 ↗
26. Raman spectrum of graphene and graphene layers10.1103/PhysRevLett.97.187401 ↗
27. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗
28. Strengthening mechanisms in nickel-copper alloys: a review10.3390/met10101358 ↗
29. Reexamination of crystal growth theory of graphite in iron-carbon alloys10.1016/j.actamat.2017.08.004 ↗
30. Calculation of carbon diffusion coefficient in spheroidal graphite cast10.4028/www.scientific.net/AMM.217-219.476 ↗
31. Nucleation and growth kinetics of graphene layers from a molten phase10.1016/j.carbon.2012.08.019 ↗
32. Cooling curve and graphite morphology in Ni–C alloys10.1179/136404608X361594 ↗
33. Direction-specific interactions control crystal growth by oriented attachment10.1126/science.1219643 ↗
34. Real-time imaging of Pt3Fe nanorod growth in solution10.1126/science.1219185 ↗
35. The role and implications of bassanite as a stable precursor phase to gypsum precipitation10.1126/science.1215648 ↗
36. Influence of wear particle interaction in the sliding interface on friction of metals10.1016/S0043-1648(98)00371-8 ↗
37. Friction of metal-matrix self-lubricating composites: relationships among lubricant content, lubricating film coverage, and friction coefficient10.1007/s40544-019-0270-x ↗
38. Effects of graphene content on the microstructure and properties of copper matrix composites10.1016/j.carbon.2015.10.023 ↗