journal article·2022-12

Controlled preparation of nano-Al2O3/PPy composite coatings to compensate surface structural defects of lithium-rich layered oxides

Yiying Bei, Yang Zhang, Yingying Li, Ye Song, Lin Liu, Juanjuan Ma, Jie Liu

Publisher page

Abstract

Li-rich cathode materials (LRCMs) have high energy density and discharge capacity, but still suffer from low initial Coulombic efficiency, unstable structure, and poor cycle stability. In this paper, an inorganic/organic composite coating strategy is proposed to effectively modulate the interfacial structure and enhance the electrochemical performance of Li 1.2Ni 0.13Co 0.13Mn 0.54O 2. The nano-Al 2O 3 and polypyrrole (PPy) double-layer coating forms a firm protective shell on the surface of the cathode material to alleviate external side reactions. The results show that the double-layer coating sample (PPy-Al-LNCM) achieved a discharge capacity retention rate of 90.74 % after 100 cycles at 1 C rate. In addition, the SEM images after cycling also confirmed that the PPy-Al-LNCM cathode still maintains an intact morphology, which indicates that this modification method is beneficial for the further development of Li-rich cathode materials.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Uniform coating of se on selenophilic surfaces of nickel-rich layered oxide cathode materials for high performance Li-ion batteries10.1021/acssuschemeng.0c00011 ↗
2. Improving performance of LiNi0.8Co0.1Mn0.1O2 cathode materials for lithium-ion batteries by doping with molybdenum-ions: theoretical and experimental studies10.1021/acsaem.9b00767 ↗
3. The effect of drying methods on the structure and performance of LiNi0.5Co0.2Mn0.3O2 cathode material for lithium-ion batteries10.1016/j.matchemphys.2021.124269 ↗
4. An effective modification strategy enhancing the structure stability and electrochemical performance of LiNi0.5Co0.2Mn0.3O2 cathode material for lithium-ion batteries10.1016/j.jallcom.2021.161480 ↗
5. The role of Ni and Co in suppressing O‐loss in Li‐rich layered cathodes
6. Insights into Li-rich mn-based cathode materials with high capacity: from dimension to lattice to atom
7. Understanding Li roles in chemical reversibility of O2-type Li-rich layered cathode materials10.1016/j.jechem.2021.08.064 ↗
8. LiPO2F2 electrolyte additive for high-performance Li-rich cathode material10.1016/j.jechem.2021.01.024 ↗
9. Iridium doping boosting the electrochemical performance of lithium-rich cathodes for Li-ion batteries10.1021/acsaem.0c03047 ↗
10. Relieving capacity decay and voltage fading of Li1.2Ni0.13Co0.13Mn0.54O2 by Mg2+ and PO43- dual doping10.1016/j.materresbull.2020.110923 ↗
11. Layer‐based heterostructured cathodes for lithium-ion and sodium-ion batteries10.1002/adfm.201808522 ↗
12. Synergistic effect of bulk phase doping and layered-spinel structure formation on improving electrochemical performance of Li-Rich cathode material10.1016/j.ceramint.2020.11.113 ↗
13. Surface LiMn1.4Ni0.5Mo0.1O4 coating and bulk Mo Doping of Li-rich Mn-based Li1.2Mn0.54Ni0.13Co0.13O2 cathode with enhanced electrochemical performance for lithium-ion batteries10.1021/acsami.1c14682 ↗
14. A novel perovskite electron-ion conductive coating to simultaneously enhance cycling stability and rate capability of Li1.2Ni0.13Co0.13Mn0.54O2 cathode material for lithium-ion batteries10.1002/smll.202008132 ↗
15. Niobium doping of Li1.2Mn0.54Ni0.13Co0.13O2 cathode materials with enhanced structural stability and electrochemical performance10.1016/j.ceramint.2020.06.152 ↗
16. Uniform Li1.2Ni0.13Co0.13Mn0.54O2 hollow microspheres with improved electrochemical performance by a facile solvothermal method for lithium ion batteries10.1016/j.electacta.2017.10.119 ↗
17. Boron doping and LiBO2 coating synergistically enhance the high-rate performance of LiNi0.6Co0.1Mn0.3O2 cathode materials10.1021/acssuschemeng.0c09265 ↗
18. Elucidating the effect of Nb doping on the electrochemical performance of Fe–Mn based Li-rich cathode materials10.1016/j.electacta.2021.139744 ↗
19. Dual functions of gradient phosphate polyanion doping on improving the electrochemical performance of Ni-rich LiNi0.6Co0.2Mn0.2O2 cathode at high cut-off voltage and high temperature10.1016/j.electacta.2019.01.082 ↗
20. Improved electrochemical performance of W6+-doped Li-rich cathode Li1.17Mn0.51Ni0.15Co0.15Al0.025O2: combined results from the reduced residual li2mno3 phase and promoted Li intercalation10.1021/acssuschemeng.1c04750 ↗
21. Understanding the role of minor molybdenum doping in LiNi0.5Co0.2Mn0.3O2 electrodes: from structural and surface analyses and theoretical modeling to practical electrochemical cells10.1021/acsami.8b09795 ↗
22. Atomic-scale mechanisms of enhanced electrochemical properties of Mo-doped Co-free layered oxide cathodes for lithium-ion batteries10.1021/acsenergylett.9b01830 ↗
23. Pyrazine-linked 2D covalent organic frameworks as coating material for high-nickel layered oxide cathodes in lithium-ion batteries10.1021/acsami.0c00643 ↗
24. Nb5+ doped Li1.20Mn0.54Ni0.13Co0.13O2 with Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) surface modification as advanced cathode material for Li-ion batteries10.1016/j.jallcom.2020.154986 ↗
25. Influence of Al and F surface modifications on the sudden death effect of Si-Gr/Li1.2Ni0.2Mn0.6O2 Li-Ion cells10.1016/j.electacta.2021.139419 ↗
26. Boosting the electrochemical performance of Li1.2Ni0.13Co0.13Mn0.54O2 by rough coating with the superionic conductor Li7La3Zr2O1210.1021/acsami.1c14229 ↗
27. Long-life nickel-rich layered oxide cathodes with a uniform Li2ZrO3 surface coating for lithium-ion batteries10.1021/acsami.7b00070 ↗
28. High cycling stability of the LiNi0.8Co0.1Mn0.1O2 cathode via surface modification with polyimide/multi-walled carbon nanotubes composite coating10.1002/smll.202102981 ↗
29. Effect of Nb2O5 nanocoating on the thermal stability and electrochemical performance of LiNi0.6Co0.2Mn0.2O2 cathode materials for lithium ion batteries10.1016/j.jallcom.2021.160415 ↗
30. Performance and stability improvement of layered NCM lithium-ion batteries at high voltage by a microporous Al2O3 sol-gel coating10.1021/acsomega.9b01706 ↗
31. Structural insights into composition design of Li-rich layered cathode materials for high-energy rechargeable battery10.1016/j.mattod.2021.10.020 ↗
32. Particle Size and Particle-Size Distribution Effects on Li+ Extraction/Insertion Kinetics for Li-Rich Mn-Based Oxides10.1021/acsaem.1c01941 ↗
33. Enhanced electrochemical performances of layered-spinel heterostructured lithium-rich Li1.2Ni0.13Co0.13Mn0.54O2 cathode materials10.1016/j.cej.2019.03.247 ↗
34. Enhancing the thermal and upper voltage performance of Ni-rich cathode material by a homogeneous and facile coating method: spray-drying coating with nano-Al2O310.1021/acsami.6b05629 ↗
35. Pathways toward improved performance of NCM523 pouch cell via incorporating low-cost Al2O3 and graphene10.1021/acsaem.0c01912 ↗
36. Improvement of the cycling performance and thermal stability of lithium-ion cells by double-layer coating of cathode materials with Al2O3 nanoparticles and conductive polymer10.1021/acsami.5b02690 ↗
37. High-energy-density LiNi0.8Co0.15Al0.05O2 and dual-phase LTO-R-TiO2 materials via a microwave-assisted reaction: alleviating the capacity fading mechanism by nanocoating of Al2O3 and PEDOT10.1021/acsaem.1c02201 ↗
38. Influence of working temperature on the electrochemical characteristics of Al2O3-coated LiNi0.8Co0.1Mn0.1O2 cathode materials for Li-ion batteries10.1016/j.jallcom.2020.156412 ↗
39. Metallurgy inspired formation of homogeneous Al2O3 coating layer to improve the electrochemical properties of LiNi0.8Co0.1Mn0.1O2 cathode material10.1021/acssuschemeng.7b02178 ↗
40. Enhanced cathode performance: mixed Al2O3 and LiAlO2 coating of Li1.2Ni0.13Co0.13Mn0.54O210.1021/acsami.0c10459 ↗
41. An effective strategy to control thickness of Al2O3 coating layer on nickel-rich cathode materials10.1016/j.jelechem.2020.114910 ↗
42. Enhancing the electrochemical performance of Ni-rich layered oxide cathodes by combination of the gradient doping and dual-conductive layers coating10.1021/acsaem.8b02112 ↗
43. High performance lithium-rich cathode modified with Al2O3 by melting impregnation method10.1016/j.matlet.2020.128479 ↗
44. Polyvinylpyrrolidone-induced uniform surface-conductive polymer coating endows Ni-rich LiNi0.8Co0.1Mn0.1O2 with enhanced cyclability for lithium-ion batteries10.1021/acsami.9b04050 ↗
45. Electrochemical performance of Li-rich NMC cathode material using ionic liquid based blend polymer electrolyte for rechargeable Li-ion batteries10.1016/j.jallcom.2020.155615 ↗
46. Enhanced electrochemical properties of Li1.2Ni0.13Co0.13Mn0.54O2 coated with Al2O3 nano-film10.1016/j.vacuum.2020.109757 ↗
47. Li-rich nanoplates of Li1.2Ni0.13Co0.13Mn0.54O2 layered oxide with exposed {010} planes as a high-performance cathode for lithium-ion batteries10.1016/j.jallcom.2017.10.285 ↗
48. Ni-rich LiNi0.8Co0.1Mn0.1O2 oxide coated by dual-conductive layers as high performance cathode material for lithium-ion batteries10.1021/acsami.7b08006 ↗
49. Constructing high conductive composite coating with TiN and polypyrrole to improve the performance of LiNi0.8Co0.1Mn0.1O2 at high cutoff voltage of 4.5 V10.1021/acsaem.1c01934 ↗
50. Effect of sterilization techniques on the conductivity of polyaniline and polypyrrole10.1016/j.synthmet.2021.116937 ↗
51. Insights into the positive effect of post-annealing on the electrochemical performance of Al2O3-coated Ni-Rich NCM cathodes for lithium-ion batteries10.1021/acsaem.0c03135 ↗
52. Improvement of the electrochemical performance of Li1.2Ni0.13Co0.13Mn0.54O2 cathode material by Al2O3 surface coating10.1016/j.jelechem.2020.113845 ↗